Paintball Forums - View Single Post

03worrpaintball · 03-04-2005, 03:52 PM

This is an anti rollback mod, but the difference between this and other one is that it stops the balls from actually rolling into the bolt face

Steps

#1 Get a sharpie and mark 2 points on the very tip of the bolt on opisite sides.

#2 Get 1/16 drill bit, and drill through the dots that you made.

#3 Get an oring with a thickness of 1.16 and cut it in half and stick through the holes.

#4 Cut off exess of the oring, and glue with super glue in place.

And it should end up looking like this.

03-04-2005, 03:52 PM	#12
03worrpaintball ^Emenresu^ Join Date: Dec 2003 Location: pa	This is an anti rollback mod, but the difference between this and other one is that it stops the balls from actually rolling into the bolt face Steps #1 Get a sharpie and mark 2 points on the very tip of the bolt on opisite sides. #2 Get 1/16 drill bit, and drill through the dots that you made. #3 Get an oring with a thickness of 1.16 and cut it in half and stick through the holes. #4 Cut off exess of the oring, and glue with super glue in place. And it should end up looking like this.