This trigger mod is indented for those of you who have aluminum triggers. I tried doing this trigger mod (http://www.pbreview.com/forums/showt...threadid=20172
) but I was unsuccessful seeing as how I couldn't get the pins out of my trigger frame. So I decided to drill a hole in my trigger and put a screw in it, its adjustable and works great. First thing I did was take my trigger off the frame then drilled a hole into the trigger from behind making sure not to drill all the way through the trigger, If you can, use a screw with a knurled end so you don't have to take the trigger off every time you need to adjust it, then put a piece of tape where the screw hits the frame so it doesn't scratch.