View Single Post
Old 10-09-2005, 05:36 AM   #2
TESballer
Registered User
 
Join Date: Feb 2004
Valves
I still think I heard somewhere that Dragunfly's have high flow Spyder-size valves. I'm still trying to confirm this, but if so than you could look into the MANY upgrade valves available for Spyders.

Suggestions: Maddman Rocket valve, AKA valve....

AKA Spyder Tornado Valve

Maddman Kingman Rocket Valve

32 Degrees Spyder Turbo Valve


Pneumatics
Unfortunately if you have a Mech it seems that you are stuck with the three-way that comes with the gun. I don't see why this is a huge issue, but some people like to change them.
I think that Autococker rams and LPR's are compatible.
QEV's would also be a good upgrade for LCD's.

***All autococker cocking rods, LPR’s, and rams fit, but if you replace the ram you have to replace the coupler and the pump rod.

KAPP FAT Ram, Cocker, Black

Shocktech A/C Ram

Regulators
The Dragunfly will accept any HPR. For Co2 use get the Palmer's Stabilizer. For HPA just get one that you like. The Bob Long Torpedo, WGP Black Magic, and ANS regs are all great, consistent regulators.

Trigger Frames
The hinge trigger frame by WGP will work if you want to replace your mech's frame, there are other's that may work as well with a little tweaking and or modifications.

For those who don't mind the stock frame too much but don't like the stiffness of the trigger pull, just go ahead and clip about a quarter of an inch off the trigger spring and stretch it out and then put it back in place. Also I found that WD-40ing the workings of the trigger before playing helped to smooth out the pull.

Also, I've seen Dragunfly's with Eblades on them, so it is possible....

Mech Frame

Autococker Hinges fit.

Worrgames Autococker Hinge Trigger Frame

Dye Autococker 2Finger Hinge Trigger Frame

Grips

45 frame grips on the Mech

Ram

Autococker rams fit, but if you replace the ram you have to replace the coupler and the pump rod.

KAPP FAT Ram, Cocker, Black

Shocktech A/C Ram

Hammers

Autococker hammers work.

ANS A/C Hammer Kit

Velocity screws

Autococker Velocity screws work

KAPP Autococker Rear Vel. Adjust Screw

Springs

Autococker springs work

Some springs at Paintballgear.com here

Beavers

Dragunfly Beavertail
(If you can find it PM me >TESballer)
TESballer is offline   Reply With Quote