Thread: ETEK Ego FAQ
View Single Post
Old 07-20-2006, 05:29 PM   #1
volcom0729
himynameispaul.
 
Join Date: Nov 2005
Location: philadelphia / new jersey
Send a message via AIM to volcom0729
ETEK Ego FAQ

Well since there's a FAQ on the regular Egos, the ETEK needs one since im sure we'll be seeing more owners in the upcomming months or others who are intrested.feel free to add any other Q and A's.

Q. How Much Does the ETEK Ego Weigh?
A. 2.47lbs

Q. How Many Shots Can I Expect Out Of My ETEK?
A. http://www.pbreview.com/forums/showthread.php?t=376783

Q. What Other Firing Modes Does The ETEK Have Besides Semi?
A. Semi Uncapped, Semi Capped, Ramping - Includes A Tourney Lock

GREEN = LOCK ON
RED = LOCK OFF

Q. Can I Use QEVs In My ETEK?
A. No.The ETEK cannot accept any 05 or 06 QEVs.

Q. What Is The ETEK's Operating Pressure?
A. 250-280psi

Q. Do 06 Triggers Work On The ETEK?
A. Yes! Early speculations ensured that it did not along with it being stated on the Eclipse site, but after some handy work from Josh376 over on PBN, he swapped triggers on the Etek and 06 Ego
http://www.pbnation.com/showthread.php?t=1662539

Q.What Changes Have Been Made?
A.
1. Rammer
2. Rammer Housing
3. No QEVs
4. New Milling
5. New Bolt
6. No LCD
7. Micro-Switch

Q. What Parts CAN Be Interchanged?
A.
1.Barrel (Cocker Threads)
2. Bolts
3. Grips
4. CCU Kits
5. Regulators
6. LPR Internals
7. ASA/Dovetail Mount
8. O-Rings
9. Trigger

Q.
What Parts CANNOT Be Interchanged?
A.
1. Boards
2. Noid
3. Front Reg Mounts
4. QEVs
5. Rammer and Housing
6. Frame
7. Valve

Q. How Does The E*Tek Compare To A PM6?
A. http://www.pbreview.com/forums/showthread.php?t=376269

How To Reassemble Bolt:


Q. What Bore Size Is The Stock Barrel?
A. .693
__________________
LIFT D2X
myspace
flickr

Last edited by f2f4 : 03-06-2007 at 07:01 PM.
volcom0729 is offline   Reply With Quote