Thread: FEP Tech-Guide
View Single Post
Old 01-02-2007, 10:37 PM   #1
.:{}:.
AGGent
 
.:{}:.'s Avatar
 
Join Date: Aug 2004
Location: Pits of Hell (Redding, CA)
Send a message via AIM to .:{}:.
FEP Tech-Guide

Taken from the manual located here:
http://www.firstendeavorpaintball.com/pdf/final.pdf

Quest Body and 'Noid Breakdown:
  1. Feedneck
  2. Feedneck Clamp
  3. Feedneck Screw
  4. Size 017 Urethane O-ring
  5. Quest Body
  6. Body Plugs
  7. Solenoid
  8. Solenoid Screws
  9. Eye Covers
  10. Ball Detents
  11. Eye Cover Screws
  12. Ball Detent Springs

Ram Valve System:

  1. Bolt
  2. Pin
  3. Size 017 O-ring
  4. Size 018 O-ring
  5. Size 014 O-ring
  6. Bolt/Pin Washer
  7. Pin Plug

Low Pressure Regulator:
  1. LPR Housing
  2. LPR Valve Core
  3. LPR Piston
  4. Size 011 O-Ring
  5. LPR Spring
  6. LPR Washer
  7. LPR Cap
  8. LPR Adjustment Screw
  9. LPR Mounting Screw
  10. Size 018 O-Ring
  11. Size 006 O-ring
  12. 0-300psi Guage

Inline Regulator:
  1. Regulator Body
  2. HPR Valve Core
  3. HPR Piston
  4. Size 15 O-ring
  5. HPR Spring
  6. HPR Washer
  7. Regulator Cap
  8. Adjustment Screw
  9. Size 17 O-ring

Frame/Board:
  1. Quest Trigger Frame
  2. Quest Trigger
  3. Trigger Pull Adjustment Screw
  4. Trigger Stop Adjustment Screw
  5. Trigger Return Adjustment Screw
  6. Trigger Screw
  7. Trigger Bearings
  8. Front Frame Screw
  9. Back Frame Screw
  10. Trigger Return Magnet
  11. Quest Board
  12. Quest Chip (Now Replaced with a WAS Board)
  13. Eye Harness
  14. On/Off Button
  15. Battery/Solenoid Harness
  16. Battery
  17. Trigger Stop Pin
  18. Board Screws

Quest Animation/Airflow Diagram (Taken from PBN, created by Gen):

  • Dark Blue = High Pressure
  • Light Blue = Low Pressure
__________________
BLUE QUEST
......with black accents

HK Streetball F/S/T
.:{}:. is offline   Reply With Quote