Clean your 3-way valve, the trigger and the inside of your frame. If there are any signs of wear on the trigger or frame, lightly polish them out. check that your front block isn't twisted, and that the 3-way spool and actuator rod aren't bent. If your trigger and sear springs are weak or short, you may need to replace those. Make sure that the 3-way o-rings are in good condition, and replace them if necessary. Lightly grease the top of the trigger place, and oil the o-rings, then re-assemble. If you still have some sticking, try lowering the LPR pressure.
It's just like a battle zone, you got a bottle and you're on your own.
Gotta be a Scotch or a Kamikaze, none of those other weapons will faze me.
Hundred, hundred, hundred bottles on the wall, you wonder if you can drink them all.
Got to go home by 1am, the bottle wins the battle again.
Husker Du - "First of the last calls"
Back when I was popular
Supporting a friend:
HustlePaintball.com for Spyder paintball guns, Dye Markers, WDP Angel 1 and of course the Hustle Hotties.