View Single Post
Old 04-05-2011, 06:16 AM   #4
fishballer06
Registered User
 
Join Date: Nov 2003
Location: PA
Send a message via AIM to fishballer06
Quote:
Originally Posted by 4THDEGREE View Post
pictures would help. Hybrid is most likely the manufacturer of the grip not hte gun model. the leak could be a faulty gauge, need for better seal on the threads of the gauge. Pull the bolt pin up and slide the bolt out, look down into the bolt slide area and you will see a slot cut in the bod. You should be able to see the ram through that slot and you should be able to see the two raised areas on the ram that bolt pin goes down between. See the stickys for routine maintenance. Post up pics and we can tell you what model Timmy you have. Welcome to the family.
Quote:
Originally Posted by MADDAWG99X View Post
so my friend gave me a bob long intimidator and on the handle it says hybrid so im assuming thats the type of bob long it is? i know nothing about bob longs. you can hear an air leak at the pressure gague and the bolt doesnt lock into anything it just slides up and down. any ideas?
Quote:
Originally Posted by 4THDEGREE View Post
pictures would help. Hybrid is most likely the manufacturer of the grip not hte gun model. the leak could be a faulty gauge, need for better seal on the threads of the gauge. Pull the bolt pin up and slide the bolt out, look down into the bolt slide area and you will see a slot cut in the bod. You should be able to see the ram through that slot and you should be able to see the two raised areas on the ram that bolt pin goes down between. See the stickys for routine maintenance. Post up pics and we can tell you what model Timmy you have. Welcome to the family.
Pete is using his super power's to take over this thread

But anyways, welcome to the Bob Long family. I'm sure you won't be let down once you get this marker back up and running.

Try everything he suggested. Are you saying the bolt isn't locking or the bolt isn't cocking? Hopefully your marker wasn't given to you with a ram in it, which could be the reason why it's not locking into anything. The reason the bolt might not be cocking back could be because the LPR is not supplying enough pressure to the bolt. Based on how bad the leak is around the gauge, that could be the cause. If the leak is subtle, turn the LPR pressure up.
__________________
Luxe 2.0, Avalanche Vanguard Demon, Stoned Assassin SFT, 5 Freeflow SFT's, Dynasty SFT, ND NXT, Toxic SFT, Shocker SFT, 2 ND Freestyle's, BKO, Promaster, FF Trauma Matrix, Adrenalin Imp, STO cocker, B2K4, Eclipse Angel LED, Eclipse RT Automag

ShockerRepair.com
ProjectPb.com

Feedback: PBN: 29+/0- OLD and 384+/1- NEW PBN Old Feedback
PBR: 11+/0- PBR Feedback
fishballer06 is offline   Reply With Quote