pbReview.com - Paintball Reviews and Paintball Fields

  Join pbReview.com  |  Log In  
pbReview.com - Paintball Reviews and Paintball Fields

Search:

  
Home     |     Paintball Articles     |     Paintball Videos     |     Paintball Gear     |     Paintball Fields     |     Paintball Stores     |     Hot Deals     |     Paintball Forums     |     Chat
Go Back   Paintball Forums > Specific Marker Forums > Worr Game Products


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 09-15-2003, 11:24 AM   #1
amzng_spyderman
Legend
 
amzng_spyderman's Avatar
 
Join Date: May 2002
a guide to upgrading your cocker

3 way* - probably the most important upgrade to your pneumatics is the 3 way. this helps determine how short your pull will be and will also change the feel of the trigger pull. great choices would be the
- Shocktech Bomb
- WGP Copy This
- Belsales Hollowpoint
anodizing* - this is the last thing you should do to your cocker and is for cosmetic purposes only. great choices for anodizing are
- www.jackalmachine.com
- www.pkselective.com.
asa - there are two kinds of air system adapters: straight and 15* angle. some find the angle more comfortable, some find the straight more comfortable. this shouldn't be upgraded until you're done with the important parts unless you can't stand the straight asa's. if so, kapp and wgp make angled asa's. dye and kapp make some good looking straight asa's.
asa screw - only necessary if you're building a cocker from scratch. compulsive paintball carries them.
back block - this part is upgraded for looks and to take weight off. don't worry about replacing this right away. when you decide to do so, look for a q-block or a jackal block. (if there's a lighter block out there, let me know)
ball detent - there are metal ball detents, delrin ball detents, rebuildable ball detents, and a "fang" detent. metal detents (such as the stock detent) sometimes wear down the bolt. there won't be a noticable loss in performance. delrin detents don't scratch up the bolt as much. rebuildable detents can be taken apart and put back together for maintenance purposes. the eclipse fang detent is like a spyder detent, it uses a nub to keep from double feeding. this is not necessary to upgrade, but if you do, get one with a light spring behind the ball to keep the bolt from dragging against it.
barrel - stock cocker barrels aren't very good. this is the case with all stock barrels. this should be replaced with a barrel of high quality, such as
- Dye Boomstick
- Smart Parts All American
- Custom Products 2 piece
see the barrel forum for more details.
beavertail - purely for looks. don't bother unless you hate the stock one or you broke it. don't go without one, most fields require them. check these out:
- Kapp beavertail
- Dye Beavertail
body - getting a new body is cosmetic. get the one you like, but make sure the company that makes it is reliable.
- www.jackalmachine.com
- www.aimpaintball.com
are such quality companies.
bolt - the stock bolt is very high flowing and isn't necessary to replace right away. bolts have no effect on accuracy or range like some people think. a good aftermarket bolt should be high flowing and lightweight. these are all great choices:
- Compulsive Edge
- Shocktech Supa fly
- AKA Lightning Bolt
- WGP Worr Bolt
cocking rod - this is primarily a cosmetic upgrade. your stock cocking rod will work fine. get one you think looks good when there's very little left to do to your cocker.
coupler* - upgrading this is pointless. if you must, omega makes a titanium coupler. dye's pmp 3 way stem as a coupler built into it.
cradle/drop forward - a cradle that feels right to you can make a day of paintball much easier. an on/off is very handy. the system x cradle suits me very well, but try out different sizes of different brands to see which one you like best. the kapp drop zone is expensive but easily adjustable to fit you perfectly.
- Kapp Dropzone
- Custom Products Flame Drop
- Check-it Unimount
front block* - upgrade a front block for looks and less weight, but don't do it right away. the evil block looks great and is less than half the weight of a stock front block. you can also consider a
- Kapp Front Block
- Dye Front Block
front block screw/lpc* - better known as a banjo bolt, there is no need to upgrade a front block screw. however, macdev makes a front block screw that you can screw your lpr into, leaving the other hole open for a gauge. this can be convenient if you can't put a gauge on the bottom of your front block, but your front block becomes a mess. scratching may occur when you try to remove/install parts. a low pressure chamber is ok for minicockers and post 99 cockers, but full size 2k cockers don't need them. if you still want one, kapp makes some nice stainless steel ones.
grips - grips can be your hands' best friend. a nice grip will give your trigger frame a much better feel.
- Dye Stickies
- Dye Sticky 3
- Smart Grips
hammer* - a heavy hammer can mean a lower pressure and increased efficiency, but a hammer that's too heavy can mean a sluggish cocker. the stock hammer is just about the right weight and you can get very good efficiency with it. if you have to upgrade it, look at a jackal hi-speed hammer or a tungsten medium hammer.
hopper - a motorized hopper is a great investment. electro cockers may need an evo II or halo, maybe even a warp feed. any other cocker only needs an agitated hopper. make this one of your first upgrades.
- hopper sticky
hose - don't starve your cocker of air! get a stainless steel hose or macro line, never micro line. any kind of macro or s/s will work great.
ivg - as long as your stock ivg is functional, don't bother looking into an aftermarket ivg. but kapp stainless steel ivgs are nice for the cocker owner who has everything.
jam nut* - same as the ivg, if it works, don't change it. the check it s/s jam nut and kapp jam nuts are the same things, so flip a coin to decide which to buy.
lpr* - an externally adjustable low pressure regulator is convenient for tuning. your stock lpr will work, but is a p.i.t.a. to adjust. a regulator that spikes can cause ball chops instead of pinches. palmer's rock regulators are very consistent, externally adjustable, and have a lifetime warranty. other great choices include the
- Palmers Rock
- Palmers Micro Rock
- Mac Dev Sonic lpr
- WGP Tickler
milling* - the second to last thing to have done to your cocker is milling. it's unnecessary but can make you stand out at the field. it's also great for taking off some extra weight.
jackal machine does great milling.
o-rings - again, if you're building a cocker from scratch, you should pick up an o-ring kit to make sure you've got the right seals. they're also good for cocker first aid. WGP makes a color coded kit.
pneumatic hoses* - hoses don't match your cocker? get a colored hose kit. but don't do it until you've got all the necessary upgrades first. most hose kits are the same.
pump arm - cosmetic/weight loss upgrade. the titanium pump arm from pbgear.com or kapp aluminum pump arms are great.
push/pull pin - your stock push pin will work fine. there's a chance it'll break, though. you'll obviously need to replace it. if you get a bolt that requires a pull pin, it'll usually come with one. buying a new pin is unnecessary as it will only make your cocker look better. if you must, just find the one you think looks best. kapp makes nice pull pins and animalpaintball.com has a really cool skull push pin.
- Kapp Pull Pins
__________________
lose is to win as loose is to tight. learn to use them correctly.

"Fossil fuels are finite, but idiots are a renewable resource."

Last edited by amzng_spyderman : 01-30-2004 at 02:44 PM.
amzng_spyderman is offline   Reply With Quote
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 04:14 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Help / FAQ  |  Contact Us  |  About Us  |  Advertising Info  |  Link to Us  |  Privacy Policy  |  Terms of Use
Top

Paintball Review

Copyright © 2000-2007 Hillclimb Media