JT Frequently Asked Questions!

[aznpsycho]

well not the long term life counter itself.
there are 3 modes with the gun. timer, shortlife, and total life counter. with the shortlife counter, you can just press that second button to reset it.

at least that's how it is on my 5.0

[pball69]

is there anyway i can make the spyder bolt i just ordered fit on my 6.0?

[racer_rodney]

5.0 is also interchangable with spyder trigger frames

broke my micro switch so I put my extra frame on it...ROCKS!!

[tpppaintballa]

hey on my 6.0 it is really hard to screw in the CO2 tank, like almost impossible! any sugguestions!?

[aznpsycho]

is the oring too big?, if not make sure you're not messing up the threads.

[Dark Glory]

Ok, so I just recently got my JT Excellerator from a friend, and I was putting on the Crossfire 3000 PSI Stubby Nitro Tank. Now I had put it on to test fire it, and it fired fine (though the paint was a little snug going through the barrel), and when I went to take it off, it unscrewed a little (With a great amount of force) and then was stuck. Now I'm 99.9% sure I was turning it the right way, but I have that .1% chance that I was wrong. Anyways, does anyone know the best way to "unstick" this tank?

Thanks =)

[racer_rodney]

for dark glory and tpppballa

the ASA on the Jt is really soft and unless you thread the bottles on exactly right it will cross thread and you will only find out when you remove the tank and it will be stuck

the fix....a really big wrench and a new asa....

[tpppaintballa]

yeah it turns out my tank was the problem... always use ur thread protectors... i learned...

[tpppaintballa]

pball69... all you need to do is take out a metal pin in it... you might have to cut it then sand it good... and make sure that its got a hole to fit the quick strip pin...

[pAiNtBaLlA91]

I'm thinkg about getting another barrel and i was wondering which was better? A 14" 32 Degrees-Spyder Quiet Riot, a 14" 32 Degrees-Spyder Whisper Barrel, or a (13" or 16") Armson-Spyder Rifled Barrel?



Setup:
JT 4.0
VL 12v Revvy with x-board
2 piece 16" JT Barrel
Custom Big Boi Drop Forward
3000psi/48cu Nitro
*LOTS MORE TO COME PLZ GIVE SUGGESTIONS*

[JT Pimp]

I guess the Armson barrels are supposed to be really nice, id go with that, try a 13"

[Cowboyfan22]

Does anybody have any step-by-step instructions (pics if you can) on how to install a 50 gram microswitch on my 5.0? I think I know pretty much what to do, but not specificly on a JT.

[racer_rodney]

remove trigger pin
remove switch screws
unplug
done
reverse for instillation

[JT Pimp]

My reply didn't work lol?

[Dark Glory]

Ok, so here's what happend. I didn't thread the ASA, I just overturned it. So instead of stopping where it wanted to stop, it just kept turning. My Dad fixed it so the ASA isn't TOO cross threaded which is nice because it still works fine! Thanks for your help, (And I did need a big monkey wrench x_x).

I know where to come next time when I have some problems (which I'm sure I will have).

[tpppaintballa]

yeah... we got ya covered... but have faith in your JT!

[JT Pimp]

My micro switch is now under 50g's, u guys think thats too light?

[aznpsycho]

the word "too light" shouldn't even exist in paintball =P

[tpppaintballa]

oooooo... tell me how you did it please

[aznpsycho]

apparently my valve is messed up from wear and tear, so i'm just gonna buy a ND spyder valve for like 25 bucks. it will fit right?