pbReview.com - Paintball Reviews and Paintball Fields

  Join pbReview.com  |  Log In  
pbReview.com - Paintball Reviews and Paintball Fields

Search:

  
Home     |     Paintball Articles     |     Paintball Videos     |     Paintball Gear     |     Paintball Fields     |     Paintball Stores     |     Hot Deals     |     Paintball Forums     |     Chat
Go Back   Paintball Forums > Specific Marker Forums > Diablo


Closed Thread
 
Thread Tools Display Modes
Old 08-03-2005, 08:41 PM   #1
I'm_Addicted
My name is Que??
 
I'm_Addicted's Avatar
 
Join Date: Jan 2005
Location: MYSTIC, CT
Wrath Faq

Diablo Wrath General Maintenance

Lubricants: Do not use lightweight liquid paintball marker oil in the Wrath. Paintball oil is best used in blowback markers to lubricate the hammer, which is a large steel cylinder sliding rapidly within the aluminum marker body. O-ring greases are best suited for the Wrath’s many small o-rings throughout the gun. Dow 33 grease, also known in paintball as Shocker grease, works well. Also, Battle Lube grease is very good, has a lower viscosity than Dow 33 (which means it’s more slippery), and lasts longer between applications.

HPR: Apply a liberal coating of grease to the HPR large aluminum piston. It is accessed by removing the bottom half of the regulator from the top half, then grabbing the end (inside the bottom half) with small pliers and pulling out. Be sure to insert the aluminum piston back into the regulator bottom the correct way, with the cupped tip of the piston facing up toward the top half of the regulator.

LPR: Apply a liberal coating of grease to the o-rings on the LPR’s large brass piston, as well as to the small o-ring on the long skinny brass piston. Each piston is accessed from opposite ends of the LPR. It is necessary to remove the LPR valve retaining nut from the threaded end of the LPR body to access the long skinny brass piston. This retaining nut has a small amount of Loctite applied to keep it in place. The LPR body should be removed from the gun, and the low-pressure hose fitting should be unscrewed from its side before placing the LPR body into a vice. Wrapping a thin towel or old t-shirt around the LPR body before putting it into the vice and clamping securely should prevent any scratching or marring to the LPR’s exterior surface. When reinserting the retaining nut, it is not necessary to apply Loctite. Make sure the retaining nut’s ground face is inward making contact with the spring, and that the retaining nut is as close to flush with the end of the LPR body as possible. Hand tightening the retaining nut is sufficient.

LPR Adapter: It is not necessary to remove the LPR adapter, held in by one M5x12 screw in the body in front of the vertical ASA, to perform regular maintenance. The only time it is necessary to remove this adapter is to access the cup seal and main valve. Be sure when reinserting the LPR adapter that you apply a small amount of grease to its two o-rings, and do not cut the o-rings when they are passing the mounting screw hole.

Solenoid/Low-Pressure Valve Assembly: Disassemble the Low-Pressure Valve Assembly from the Solenoid and grease all four o-rings inside. The two inner o-rings on the brass carrier make contact with the plunger piston which controls air flow, and should receive a liberal application of grease. The outer o-rings on the brass carrier are stationary and only need a small amount of grease to ease reassembly. When reinserting the carrier into the valve body, position one of the side air exit holes inline with the hose fitting in the valve body. When reinserting the plunger piston into the carrier, be sure the piston goes in with the grooved end in first. When reinserting the Solenoid/Low-Pressure Valve Assembly back into the trigger frame, make sure the Solenoid/Low-Pressure Valve Assembly is pushed as far forward toward the trigger switch as possible when tightening down the two set screws. If the Solenoid/Low-Pressure Valve Assembly comes loose or the solenoid plunger is in contact with the trigger frame, it may not permit the Low-Pressure Valve’s plunger piston to close and create a proper seal. This may cause a small leaking sound, or may even cause the bolt to rapidly cycle when the marker is first aired up.

Ram: Apply a liberal coating of grease to the o-ring on the small end of the ram.

Bolt: Keep the bolt clean and dry at all times. It is unnecessary to grease the bolt. Grease on the bolt will collect dust particles from the air and cause scratching of the inner surface of the body.









CURRENT UPGRADES & MODS:

Custom Anodizing:
www.precisionpb.com They ano an entire marker for $60 or a per-peice price of $7.50 and do GREAT work. They also do color matching, so send in a paint chip or color sample and get great results.

Wrath Aftermarket Parts:
Alamo City Paintball: www.alamocitypb.com
Bolts, Cup Seals, Bolt Pins, more soon

FBM Delrin Wrath Triggers:
www.fbmfactory.com

Trigger Mod:
http://www.pbnation.com/showthread....t=&pagenumber=1

Trigger Switch Mods:
http://www.pbnation.com/showthread....threadid=856551
http://www.pbnation.com/showthread....hreadid=1022251

Trigger Guard Mod:
http://www.pbnation.com/showthread....threadid=894727

Aftermarket LPR Adapter:
The Wrath and O3 share many parts, and the LPR adapter is one of them, so if you have the mind to put on an aftermarket LPR, pick up the Zenitram O3 LPR adapter for $15 and an Autococker compatable LPR.
http://www.zenitram-mfg.com/ (Odyssey Upgrades>O3 LPR adapter)

Delrin Bolts:
http://zoompaintball.com/ (Sells BLACK delrin bolts)
http://www.pbnation.com/showthread....threadid=846394
www.spudnukl.com

PROS: Self-lubrication. Roughly 27 grams.

Nylatron Bolts:
http://www.pbnation.com/showthread....threadid=896352

PROS: Self-lubrication. Roughly 25 grams.

TFE Teflon Bolts:
www.spudnukl.com

PROS: Self-lubrication. Roughly 50 grams.

Wrath T-board:
http://www.scenariodreams.com
http://www.pbnation.com/showthread....threadid=855370

Custom Triggers:
Do a search for pbnation users: Comcast and THE BETTERONE

Air Ram Mod:
http://www.pbnation.com/showthread....threadid=864525

Autococker Vertical ASAs:
https://secure1.nexternal.com/share...ount2=979987740
(Scroll down- Straight and 15* ASAs with or without gauge ports)
__________________
AOF
PLANET ECLIPSE
I'm_Addicted is offline  
Old 08-04-2005, 06:38 AM   #2
Wrath Lord
Registered User
 
Wrath Lord's Avatar
 
Join Date: Mar 2005
Congrats.... Now hopefully we wont have so many stupid questions which have already been asked millions of times! Worthy of Stickyness if ever i saw one!
__________________
My Setup
#1 ][ Black SP Ion
][ CP Sling Blade Trigger
][ Hybrid 45* Shizzle Bad Guy grips
][ ER Adjustable Feedneck
][ SP AA Barrel


#2 ][ Gen. I Black Wrath
][ Custom Trigger


][ Clear EggII
][ 68/3000 Crossfire HPA system


Yes... thats right, I OWN BOTH an ION and a Diablo Wrath! and IMO the ION is FAR better!!!
Wrath Lord is offline  
Old 08-04-2005, 01:34 PM   #3
pyromonkey
yea, i know im sexy...
 
pyromonkey's Avatar
 
Join Date: Jun 2004
Location: Boca
nice thread, but you didnt just copy and paste this from pbnation did you? lol
__________________
Are those my balls on your face??......



....And my PAINT!!??
pyromonkey is offline  
Old 08-04-2005, 02:39 PM   #4
I'm_Addicted
My name is Que??
 
I'm_Addicted's Avatar
 
Join Date: Jan 2005
Location: MYSTIC, CT
Quote:
Originally posted by pyromonkey
nice thread, but you didnt just copy and paste this from pbnation did you? lol

no , I copied/pasted to Word and then to here. We needed this though.
__________________
AOF
PLANET ECLIPSE
I'm_Addicted is offline  
Old 08-05-2005, 03:14 PM   #5
SKI008
Mechwarrior
 
SKI008's Avatar
 
Join Date: Jul 2003
Location: California
Most of your links don't work.
__________________
Crazy 05 Ego and BNIB Marq 6 For Sale:
This line is in rememberence of Jared Wilson, a friend of mine and a teamate. RIP 7/27/2005
SKI008 is offline  
Old 08-06-2005, 04:24 PM   #6
pyromonkey
yea, i know im sexy...
 
pyromonkey's Avatar
 
Join Date: Jun 2004
Location: Boca
Quote:
Originally posted by I'm_Addicted



no , I copied/pasted to Word and then to here. We needed this though.
so you copied from pbnation to word to here???
w/e
still a good thread to help out a lot of ppl here.

btw, i didnt mean to offend you or anything i was just curious
__________________
Are those my balls on your face??......



....And my PAINT!!??
pyromonkey is offline  
Old 12-11-2005, 01:29 PM   #7
fred1
Registered User
 
fred1's Avatar
 
Join Date: Jul 2003
Location: B.C.
Send a message via MSN to fred1
i read at the top it said no oil but would it be allright to put some in the ASA from time to time like other guns?
thanks
__________________
pewter Dynasy Shocker, 14" all american w/5 inserts, New Designz Slik Trigger, New Designz Detents, HE bolt, CCM clamping feedneck, Nerve Rebound ramping board, Custom Products Regulator, Custom Products on/off ASA, Pure Energy 68ci/4500psi, VL Vlocity
fred1 is offline  
Old 12-11-2005, 04:56 PM   #8
brunedog
Daddy Diablo
 
brunedog's Avatar
 
Join Date: May 2005
Location: Florida Keys
Send a message via AIM to brunedog Send a message via Yahoo to brunedog
er. you should make this a stickie and get some new links . Really need an upgrade stickie for this forum.
brunedog is offline  
Old 12-11-2005, 11:15 PM   #9
paint123
Registered User
 
paint123's Avatar
 
Join Date: Jun 2005
Quote:
Originally Posted by fred1
i read at the top it said no oil but would it be allright to put some in the ASA from time to time like other guns?
thanks
u should never put oil in the asa of any gun
__________________
Team NV
VISIT OUR FORUM!!!
paint123 is offline  
Old 12-12-2005, 08:14 AM   #10
fred1
Registered User
 
fred1's Avatar
 
Join Date: Jul 2003
Location: B.C.
Send a message via MSN to fred1
Quote:
Originally Posted by paint123
u should never put oil in the asa of any gun
wow, really! thanks alot for that info.
__________________
pewter Dynasy Shocker, 14" all american w/5 inserts, New Designz Slik Trigger, New Designz Detents, HE bolt, CCM clamping feedneck, Nerve Rebound ramping board, Custom Products Regulator, Custom Products on/off ASA, Pure Energy 68ci/4500psi, VL Vlocity
fred1 is offline  
Old 12-12-2005, 03:56 PM   #11
paint123
Registered User
 
paint123's Avatar
 
Join Date: Jun 2005
np, just helping a fellow baller
__________________
Team NV
VISIT OUR FORUM!!!
paint123 is offline  
Old 12-12-2005, 04:12 PM   #12
Zofarr
Moderator
 
Zofarr's Avatar
 
Join Date: Sep 2004
Location: Canada
Hmm most of the links don't work
__________________
My Feedback
Quote:
Originally Posted by 4THDEGREE
Yes I am going to put it in the Ultimate Sticky after folks have a chance to find it since nobody ever reads stickies.
Meaning... Read the stickies.
Quote:
Originally Posted by Ebonclaw

Last edited by Zofarr : 01-09-2006 at 06:50 PM.
Zofarr is offline  
Old 12-13-2005, 03:20 AM   #13
Lopez17
Administrator
 
Lopez17's Avatar
 
Join Date: Oct 2002
Location: Stone Ridge, VA
Be sure to go into the post and give credit to the original author and cite where it came from.

Stickied.
__________________
Bought or Sold From me? Leave me Feedback! (+18/-0)

Quote:
Originally posted by Jaster
I'd have given someone's arm for a U-Haul and 20 minutes alone with a forklift.
Lopez17 is offline  
Old 12-17-2005, 11:07 AM   #14
ragezeon
Registered User
 
ragezeon's Avatar
 
Join Date: Dec 2005
most of the links are not active anymore
__________________
USMC - Semper Fidelis
(Silver) Diablo Wrath
Checkit Uni-Mount, Bob Long Torpedo
32 Degrees Macroline Kit
ACP Black Delrin Bolt, Ram, and Pin
FBM Delrin Wave Trigger
Diamond Black Empire Reloader B
Crossfire 47/3000
ragezeon is offline  
Old 12-25-2005, 08:25 AM   #15
coffin_stuffer
Registered User
 
coffin_stuffer's Avatar
 
Join Date: Sep 2005
Location: Guam
is there a way to put internal hoses lyk the new wrath LTD? and can u replace the feedneck, if so, what fitting do i look for?

thnx. nice thread
coffin_stuffer is offline  
Old 12-28-2005, 04:34 PM   #16
punkp8ntballer
Jeremy
 
punkp8ntballer's Avatar
 
Join Date: Dec 2005
Location: Albuquerque, New Mexico
teflon or delrin???

I just got my wrath and I want a new bolt that will improve the accuracy and speed and stop the chopping in my gun will any bolt do that and would teflon or delrin be a better material????????????????????
punkp8ntballer is offline  
Old 12-29-2005, 11:13 PM   #17
paint123
Registered User
 
paint123's Avatar
 
Join Date: Jun 2005
either works, its mostly preference, delrin is just lighter than teflon, so u reduce kick more
__________________
Team NV
VISIT OUR FORUM!!!
paint123 is offline  
Old 01-17-2006, 02:35 PM   #18
jp_paintballer
Registered User
 
Join Date: Jan 2006
hey, i just bought your diablo wrath and i was woundering if you could send me a few stickers to put on my gear.

thanks
jp_paintballer is offline  
Old 03-06-2006, 06:10 PM   #19
nativetool
Registered User
 
Join Date: Mar 2006
wrath replacement eyes

hi. i broke my eyes for my wrath and i was wondering what kind of replacment ones do i need ? where can i get these?
nativetool is offline  
Old 03-09-2006, 06:01 PM   #20
o state
Registered User
 
Join Date: Oct 2005
i think u can get some from acp's website but im not sure... maybe not.

i dunno
o state is offline  
Closed Thread



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 04:36 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Help / FAQ  |  Contact Us  |  About Us  |  Advertising Info  |  Link to Us  |  Privacy Policy  |  Terms of Use
Top

Paintball Review

Copyright © 2000-2007 Hillclimb Media