------ EXTREMELY URGENT ------- Everybody read this, BEFORE buying a used tank!
In a DOT advisory published HERE on August 12th, 2005, certain cylinders for use with high pressure air have been de-certified for use.
The tanks, which were manufactured by Global Composites International (GCI), located in Ontario, California. The tanks were found to have an insufficient number of carbon fiber wrappings on them, and evidence cited in the report also suggests that the tanks didnt undergo the required number of tests mandated by DOT-E 12695.
The report states in part:
DOT recommends that any person possessing a cylinder manufactured by Global Composites International, Inc. (GCI) and marked with exemption number DOT-E 12695 take the cylinder to a qualified refilling station and have the pressure relieved from the cylinder. The cylinder is no longer authorized for use.
Refilling stations and cylinder requalification facilities are advised that DOT-E 12695 has been suspended and these cylinders may not be refilled or requalified for service.
This safety advisory covers all high-pressure DOT exemption
cylinders manufactured by Global Composites International, Inc. and
marked with DOT exemption number DOT-E 12695.
Update: See below, this has been expanded to ALL GCI tanks manufactured in 2004 or later. It seems that DOT-E numbers OTHER then 12695 are affected.
An email from a visitor to (site censored) stated that this situation prevented several tanks from being used at a tournament in Northern California this weekend.
IF you haven't checked your tank, do it NOW. Some people have already reported tank failures.
Your best bet is to call Crossfire, and demand a refund. Or at least a tank replacement.
Even if you do NOT own a Crossfire or MacDev or Ignition tank, check the thing anyway! Sometimes, other companies will use other tanks... and it's better to take 5 seconds of your time, then wind up without an arm.
This recall has now been expanded to ALL bottles made by GCI on ALL tank systems, 2k4 and later.
Originally posted by niteHawk
Just to be clear, since there seems to be a lot of confusion in this thread.
1 - It doesn't matter what reg is on it (Crossfire, MacDev, PE, Whatever). Any/all of them could have the problem bottle.
2 - Having a High Pressure or Low Presure or adjustable reg does NOT matter.
3 - The bottle needs to be made by GCI - it will say GCI on the bottle itself. Note that "Crossfire", "MacDev", "PMS", "NitroDuck", etc are NOT bottle manufactures, they made the reg, so look harder for GCI, SCI, or Carleton. If it says GCI, you have a problem bottle.
See here for details:
Such tanks are NOT safe for filling! DON'T RISK YOUR LIFE JUST FOR A COUPLE GAMES!
Ripped from 68Caliber.com
GCI closes down business; releases information on tanks they feel are safe
This letter is to update all current and past paintball customers of GCI, Inc. The U.S.
Department of Transportation has begun an investigation into select paintball pressure vessels
manufactured by GCI. One of the allegations is that certain cylinders did not go through proper
hydro testing procedures. As a part of the investigation, DOT has suspended GCIs
manufacturing exemptions. Many of the concerns raised by the DOT are inaccurate, and our
lawyers are working with DOT to clear up may of the issues. Nevertheless, GCI has decided not
to fight the suspension. Effective August 1, 2005, GCI has permanently closed its business.
The DOT recently published a broad public safety advisory in the federal DOT registrar intended
to protect the public from possible danger. The press release had to be broad because the DOT
has not yet completed its investigation and does not yet have copies of all of the testing data from
GCIs independent testing agency. In reality, it is only select tanks that need to be recalled, and
our lawyers are presenting the proof that most tanks shipped to our paintball customers were
indeed flawless in terms of manufacturing quality and hydro testing certifications.
Please update all of your customers to whom you have resold any GCI paintball tank. At least
until the DOT amends the safety advisory, all use of GCI tanks must cease immediately. Please
provide us with the names and addresses of all customers to whom you resold GCI tanks. Please
also provide us with a copy of the invoices for each sale and any other documentation you have
identifying the serial numbers on the tanks you have sold. If you are contacted by any of your
customers, please ask them to send you the paintball tank serial number from both the label on
the tank and the neck of the bottle (if visible). Finally, please provide us with the serial numbers
(from both the label and the neck of the tank) for all GCI tanks you still have in your possession.
Please fax us copies at (866) 217-9177 of these records at your earliest convenience. This will
assist GCI in tracking down and retrieving every suspect paintball tank. We have attached a list
of tanks that do NOT need to be recalled for your reference, but please retain the information
requested above regardless if a customer calls you questioning their tank.
Once we have provided the DOT with all of the relevant documentation, we hope to have the
DOT reissue an update to the press release stating that only the suspect tanks need to be recalled.
The above requested information will greatly assist us in resolving this issue immediately.
We sincerely apologize for any inconvenience this will cause you and your customers. We
appreciate your past patronage and hope the best in your business ventures in the future.
Global Composites International
GOOD CYLINDERS WITH HYDRO DATA IN HAND
B10001 B10191; B10201 B10347, B10401 B10574
A00001 A00200; A00201 A00397; A00401 B00583
A00601 A00800; A00801 A01000; A01001 B01183
A01201 A01400; A01401 A01600; A01601 B01800
A01801 A01977; A02001 A02053; A02055 B02195
A02201 A02348; A02401 02440 B10577 B11164
MODEL SERIAL NUMBERS
B10560 10571 12
B10574 10589 16
B10774 10789 16
B10590 10653 64
B10654 10717 64
172 TO BE RECALLED
B10125 B10127, B10129, B10131 B10134
B10137 B10140, B10143 B10147, B10149, B10151,
B10153 B10155, B10160
B10162, B10163, B10166, B10168, B10169
B10172, B10173, B10175 B10179
B10182 B10185, B10187, B10191
B10193 B10197, B10242, B10244
B10247 B10249, B10252 B10256, B10258
B10260 B10264, B10267, B10268
B10270 B10273, B10275 B10308
91 TO BE RECALLED
Last edited by f2f4 : 08-28-2005 at 07:29 AM.