Ultimate Level Of Ghettoness - Page 2

imaslavemidget · 03-07-2006, 05:43 PM

Dont get too excited guys this is the ultimate prototype im just giving you all an idea IT SUKS FOR NOW youll be able to see more once i get it programed. then it will start looking decent.

@metalmonkey sure wait while i upload EDIT its here and only 3.4 secs http://media.putfile.com/SHoirt-version-of-lego-trigger

EDIT:Once again I say Im am just showing that when trigger is pulled the motor runs and moves the "sear" When the sear is held in place and the motor is programed so it doesnt run till the sear flies out the top. I probably shouldnt of shown this yet but progress was going slower than hoped and i just felt like showing something.

Mentalmonkey10 · 03-07-2006, 06:02 PM

Um, ok. I know it's the prototype, but why is your finger pushing up the sear thing? Other than that and it being very loud, seems nice. Great idea. Next, complete lego gun.

Anyways good job. Thanks for the shortened video too.

imaslavemidget=

Telepathetic · 03-08-2006, 01:59 PM

I had a Lego Mindstorms set for about 8 months. I sold it on E-Bay for as much as I got it for. Isnt the trigger frame very wide? I always thaough that motor was pretty big. I would like to see this thing when it is done! Keep up the good work.

MrTedLugent · 03-08-2006, 09:21 PM

Haha, thats pretty ghetto, if I do say so myself

Anywho, once you're finished, where do you plan on putting that RCX? I was thinking about doing it as well (except just adding a motor to the crank arm), but didn't like the thought of trailing a wire off of it onto the remote.

2 ghetto thumbs up.

imaslavemidget · 03-09-2006, 01:32 PM

@Metalmonkey

My finger had to push the "sear" because it wasnt fitting in right so i just filmed and went to bed. I got that bug out so now it fits in there nice and snug

@MrTedLugent

THe whole rcx thing, for those of you that dont know its the computer that controls the motor, Im gonna run one of the long wires down the remote

Mentalmonkey10 · 03-09-2006, 04:19 PM

Quote:

Originally Posted by imaslavemidget

@Metalmonkey

My finger had to push the "sear" because it wasnt fitting in right so i just filmed and went to bed. I got that bug out so now it fits in there nice and snug

O, ok.

P.S., I like the sig.bragger

imaslavemidget · 03-09-2006, 05:35 PM

Im gonna get that comp hooled up this weekend so i can program, then it will start looking like something decent. after that it shouldnt be too hard to fit it to my gun i think im gonna make holes the size of screws on some thin lego pieces then put some washers in and tighten it up.

P.S.My sig comes from experience, I like to dance around in this really open tower at the local field and everybody shoots cause im a BIG target but they dont realize they cant hit me beacuse the've got to aim that high up and that far away. I once got hit with about 7 balls and none of em broke. It usually takes about 5 to break. I love taunting.

Metalmonkey what did that ACI hornet look like before you moded it

Mentalmonkey10 · 03-09-2006, 06:15 PM

I ment about the lego mod thing. An un-modded ACI Hornet looks like this...

Not that prety, and I don't like black. So I de-anoed it and roughed it up with a wire dremel brush so it got a matte finish. The screws for the sight rail got stripped, and I have yet to get them re-taped (might do that this weekend). I ported the barrel with those huge holes for quietness and look (if you have ever heard this gun stock, you will learn why it needs porting). whats not in the picture in my sig dosn't show is my homemade detent (I dented the back of the barrel slightly with a screwdriver and hammer (no, it dosn't break paint that is even way too big for the detent). I also made a stock class feed tube out of copper piping a few days ago.

Wow, I never really knew how much that I did to that... Think I should paint the pump and grip frame?

(serious question)

imaslavemidget · 03-10-2006, 04:16 PM

Id keep that like it is. it looks swee t with just the barrel and the grip black kinda looks like a little tube sitting on a frame. Is that thing any good. Or is it like a $20 blade?

Mentalmonkey10 · 03-10-2006, 08:59 PM

Way better than a blade or anything, but no where near as good as a Phantom. I just wanted to try pump and I didn't feel like spending $350 on a Phantom to find out that I didn't like pump, so I bought this. $75 and it gets the job done fine.

In accuracy, it is about equil to my spyder with a SP Teardrop barrel (not bad at all), it has a lighter pump than my friends Phantom, weighs about as much as a Phantom, but it is incredibly loud.

lilkiller · 03-10-2006, 09:26 PM

thats pretty cool, takes talent

Mentalmonkey10 · 03-10-2006, 09:48 PM

Ya. IMO it's funner than semi.

di$TOrTed · 03-11-2006, 07:44 PM

omg that is so ghetto but still awesome

imaslavemidget · 03-13-2006, 12:38 PM

Sorry guys i couldn't get my computer hooked up cuz my dad was gonna do it on Sunday while I was pbing but He decided to come out with us so i didnt get it hooled up but i got to shoot my dad

Ill try to get it up this week. I just had another super ghetto Idea. Lego ball detent...........

I was looking at the top of a lego helmet then I picture my detent and I was like wow there the same. A few springs and ittll work

I've decided im gonna turn my whole spyder into legos once I get my new cocker.
Lego parts im gonna build

Or atleast try
Drop forward
Ball Detent
E trigger
Front Grip
E-hopper
Bipod

Thats gonna look Ghetto

I cant wait till its done Im gonna start on these while im waiting for that comp to come up.

pbfreak8675309 · 03-13-2006, 12:51 PM

just make a case for every thing outa legos so it looks like it is outa legos

Mentalmonkey10 · 03-13-2006, 02:59 PM

Quote:

Originally Posted by imaslavemidget

Sorry guys i couldn't get my computer hooked up cuz my dad was gonna do it on Sunday while I was pbing but He decided to come out with us so i didnt get it hooled up but i got to shoot my dad

Ill try to get it up this week. I just had another super ghetto Idea. Lego ball detent...........

I was looking at the top of a lego helmet then I picture my detent and I was like wow there the same. A few springs and ittll work

I've decided im gonna turn my whole spyder into legos once I get my new cocker.
Lego parts im gonna build

Or atleast try
Drop forward
Ball Detent
E trigger
Front Grip
E-hopper
Bipod

Thats gonna look Ghetto

I cant wait till its done Im gonna start on these while im waiting for that comp to come up.

Quote:

Originally Posted by Mentalmonkey10

Next, complete lego gun.

Now, the front grip you can't make out of legos unless you plan on having it hold back 800psi, but you can make a reg/expansion chamber/gas through grip cover. (kinda like the Ion)

The ball detent might chop a lot, but if you plan on doing it, try to use weak magnets that you can screw in and out to addjust the pressure. It'll give you the challenge.

The hopper will be awsome. Unless you are doing it with a lego moter, try using a model plane propeller (with something soft on the blades like foam), a battery pack, a small adjitator, and finally a low power resistor. All can be bought at radio shack except for the propeller. But I have no doubt in my mind that you will do the entire thing out of legos.