pbReview.com - Paintball Reviews and Paintball Fields

  Join pbReview.com  |  Log In  
pbReview.com - Paintball Reviews and Paintball Fields

Search:

  
Home     |     Paintball Articles     |     Paintball Videos     |     Paintball Gear     |     Paintball Fields     |     Paintball Stores     |     Hot Deals     |     Paintball Forums     |     Chat
Go Back   Paintball Forums > Specific Marker Forums > Dye Precision


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-20-2006, 03:31 AM   #1
darktrooper5
Moderator
 
darktrooper5's Avatar
 
Join Date: Oct 2003
Location: Potomac Falls, VA
Send a message via AIM to darktrooper5
Ultimate Dye Marker Differences Thread

I know that we have the charts, thats good and everything, but I thought a comprehensive thread on each of Dye's gun would be helpful.

I'm sure I've missed something, I'll continue to update this.

DM4:

The DM4 was a "rebirth" of the original Matrix design. It was something new and fresh. It was sleeker, slimmer and looked sick. It was a bit heavy and a real gas hog. Back in 03/04, it was considered one of the top guns out there. The DM4 is actually still up there, competitive and sought after in used markets. Its been discontinued, so the only way one of these bad boys can be picked up is used/second hand.

The DM4 had various features that are still seen in todays newer models. I'll refer to this as the "Grandfather of all DYE matrixes". NOTE- I am not comparing any of this to the "DM3", discount this marker when reading.

Features:

* "Original"
* It is the longest DM, tallest
* Notice the sideways "M" milling
* Comes stock with Dye Sticky grips
* Stock Ultralite 14'
* Hyper 2 HPR
* Fuse Bolt(longest and least efficent)
* Membrane pads
* Basic Clamping feed
* On/Off for the marker(non asa)
* LBI and non LBI boards(depending on time of purchase; low batt indicator)
* The programming chips could be replaced
* The trigger could only be adjusted inside the frame
* Internal lpr system beneth the bolt
* LED indicator for settings
* Anti-chop eyes
* Ball detents

The DM4 was widely popular and still is today. Due to milling reasons, they could not take no-rise feeds, which lead to the already exsisting problem of a tall marker. The gun had no gauge for lpr adjustments and needed to be lubed often. The DM4's had a bit of a reputation for not being the most reliable markers, which was mainly due to the user. This marker was released in the color Olive drab, which became somewhat of a "hot color".




DM5

The DM5 was Dye's answer to the DM4. They had obviously read/heard some complaints that users had and fixed them. The DM5 and DM4 look very similar and for all intents and purposes, are the same marker. There are just little improvements here and there. When the DM5 came out, the DM4 was still fairly new. Does the DM5 warrant a pickup over the DM4? You be the judge.

Features: Note: These are only things that had changed over the DM4 design

* Shorter in height and length
* Different style of milling
* Partial external trigger adjustment
* DYE ASA was included
* New style roller trigger, was "smoother"
* Lower and different clamping feed
* The bolt was shorter and boasted more shots per tank
* Lighter(not drastic, matter of ounces)
* At the time, it was the "newest thing"
* Spring detents

The HYPER 2, Ultralite and Grips all stayed the same, along with the board. It still took the same board technology and membrane pads. The membrane pads wore out too quickly in most cases and became annoying for Dm owners, but Dye didn't fix the issue until later. Basically, the DM5 is the same gun as a DM4, but with a few goodies.

http://www.shopsplatattack.com/images/DM5%20jpg.JPG


DMC

The DMC was a "limited edition" at first. And techincally, still is is. The name stands for Dye Matrix Composite. Peices of the Dm5 were replaced by a composite non metallic material, boasting a lighter marker. The gun also came with a newer twist grip feed. The gun had a "grip" area by the HPR and accents of color along the rear milling. When the gun first came out, it was expsensive and most didn't see the value in buying one over a new DM5.

Features:

* Composite Material within body
* Lighter than the DM5
* Different annodizing
* New clamping feed
* Originally "Limited Edition"


DM6

The Dm6 retained the classic DM4 style, but gained a new frame and electronics. The Dm6 is the smallest and lightest DM. Dye added their Ultralite frame to the mix and then were able to release it at a similar time for all other DM and PM's. Dye finally had done away with the membrane pads and installed buttons.

Featues:

* Ultralite frame
* New style sticky grips
* Revamped board and electronics
* Buttons instead of membrane pads
* 100% external trigger adjustment
* Redesigned bolt, more efficent
* Hud LED on the frame
* On/off asa
* Self Cleaning eyes


Dye DM7

The Dm7 is Dye's latest and greatest marker. At first glance, the 6 and 7 look identical. The easiest way to tell them apart is the feedneck ring, the 7 uses a new lever system as opposed to the older knob. The 7's lpr is smaller and redisigned, the self cleaning eye system is also redone, as is the front on/off, which now has three o-rings instead of two.(WHY!!!) Its is important to note that the DM6 and DM7 use different eyes! The 6 and 7 are inherently, the same marker.

Features:

*Newer milling, the 6 is indeed shorter and lighter in tha back as opposed to the 6
*Redone LPR
*New self-cleaning eye system, once huge peice
*Old style DM eyes, similar to those found in the 4/5/C
*Redone front on/off
*Lever clamping feedneck






Proto Matrixes:

These guns are from Dye little sister company, Proto. Basically, they have Dye quality under a different name and lower prices. The Pm's usually are very basic and don't have much to them. They are quite customizeable and have become popular in used markets. They don't have interchangebale chips like DM's so a new board must be bought.

PM5
The PM5 came out at a similar time as the DM5. I see this as a "little brother" DM5, although its more like a DM4. They take DM4 triggers, DM grips and feeds. They use a special type of board that has non-removable chips. The PM5 has improved efficency over the DM4. The have non-clamping feeds and buttons instead of membranes. The PM5 also has a redisigned lpr that has been moved to the front of the marker, removing the internal gun on/off. Becasue the lpr has been moved, the PM5 is shorter than the DM4 and DM5.

Features:
* Repositioned LPR
* New board Stlye
* Proto one peice barrel
* Composite eye covers
* Rubber detents
* Internal trigger adjustment
* Plastic board buttons
* LED readout
* Proto Grips
* Fuse Bolt
* Non-clamping feed
* DYE Hyper2 Reg




The DM's and PM's operate in similar fashiones, they are after all, Matrixes. The PM5's production is being slowed down and prices plummeted due to the newer PM6.

PM6

The PM6 is the newest PM, it came out right after the Dye DM6. The PM6 boasted new milling,weight and style. The prefromance stayed the same, but the looks became more thrilling. The PM6 doesn't excatly have a ton of new things to be thrilled about, but Proto added some goodies.

Features:

* New milling
* Lighter than PM5 abnd shorter
* Proto two peice barrel
* Clamping feed
* Proto on/off
* "Sleeker Design"



PM7

The PM7 is yet another version of the ever popular Proto Matrix. Its smaller than 5 and 6, but maintain's most of the previous model's features.

Features:

* New milling, a shorter marker all around.
* No more compostie eye plates, all metal, individual
* New board thats slimmer and oddly enough reminds one of a Shocker main board
*DM6 style Feedneck



ALL of these guns are COCKER threaded and can take EITHER HP OR LP

Last edited by darktrooper5 : 04-24-2007 at 08:10 PM.
darktrooper5 is offline  
 



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 12:29 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Help / FAQ  |  Contact Us  |  About Us  |  Advertising Info  |  Link to Us  |  Privacy Policy  |  Terms of Use
Top

Paintball Review

Copyright © 2000-2007 Hillclimb Media