Proto Matrix Rail- Questions Answered!

[protofreak]

Mine was fine when i got it in the mail but getting that dam old battery off it is going to be a pain

[tviz]

Mine was fine but now you remind me i should check the dwell and stuff...

[protofreak]

well common sense says if it shoots its high enuff

[TeamDeliverance]

Originally Posted by zynniv

i had the same problem with the battery wires. first time i went to put a battery in my PMR, one of the wires detached. i put it back on with a little solder, and it has been fine since.

I would of done the same but i didn't want to void my warranty. If you try to fix it yourself, companies tend to think that you broke it instead of the gun being defective. Dye has great costomer service and will give you basically anything for free... just keep asking for parts and you could make a DM7 from scratch.

[dave5]

the manual doesnt explain how psp and millenium modes work other than "follows the rules of the tournament paintball series"

[The Thnickaman]

i was wondering, im looking into getting a rail, and i was told that i should get a UL frame for it, not wanting to drop an extra $200 i found the individual UL triggers for it, should i get the UL trigger, or is it fine without the upgrade?

[protofreak]

Originally Posted by The Thnickaman

i was wondering, im looking into getting a rail, and i was told that i should get a UL frame for it, not wanting to drop an extra $200 i found the individual UL triggers for it, should i get the UL trigger, or is it fine without the upgrade?

its fine with out the new trigger but if you are going to get one i suggest the newdesignz slik trigger

[protofreak]

Originally Posted by protofreak

o and little word of advice dornt turn the lrp down to much or the bolt wont move and it will leak out of the back of the gun

Originally Posted by darktrooper5

There is no lpr on the Rail.

srry hpr noob moment

[StumpyManager]

Not to burst anyones bubble but my PMR is just fine. In fact, the eyes were connected, my fps stayed a constant 282 for 8 straight games, and the only leak in it i fixed by tightening the bolt cap which got loose after it cleaned the bolt. I think that you guys were just all unlucky with your guns.

[bigwood212]

mine is fine too. Except the fact that i only get 2 hoppers before im out of air????? wtf. 68/45

[protofreak]

lube your bolt

[darktrooper5]

Originally Posted by bigwood212

mine is fine too. Except the fact that i only get 2 hoppers before im out of air????? wtf. 68/45

Thats some nasty air suckage. Check your dwell(25), make sure you have no leaks in your marker and that your tank is working properly.

[BrownSocks]

My PMR is great, everthing came perfect except backcap.

[Terminate]

love my PMR but i do suggest an aluminum back cap and an NDZ slik trigger

[protofreak]

Originally Posted by Terminate

love my PMR but i do suggest an aluminum back cap and an NDZ slik trigger

amen brother

[bigwood212]

Originally Posted by darktrooper5

Thats some nasty air suckage. Check your dwell(25), make sure you have no leaks in your marker and that your tank is working properly.

HA! Found the problem! Apparently mine isnt fine. My bolt broke in half on the inside. When you pull it out and unscrew it. You know the head of the bolt attaches to the long narrow portion and slides back and fourth. Yea mine is completly detached at the head. It even looks like its supose to be like that. Was still shooting fine though. Just eating air.

[protofreak]

I have been asked this alot when playing and i did a lil searching and found out that its operates at 150 psi considering that the dm7 works at 145psi
which would explain the reason i can shot realy fragile paint (dxs hellfire)


This is just some useful info some might need but if your going to flame for a stupid post i hope bad things happen to you

[B2KJustin]

I love my Black PMR LOl.......

[darktrooper5]

Originally Posted by bigwood212

HA! Found the problem! Apparently mine isnt fine. My bolt broke in half on the inside. When you pull it out and unscrew it. You know the head of the bolt attaches to the long narrow portion and slides back and fourth. Yea mine is completly detached at the head. It even looks like its supose to be like that. Was still shooting fine though. Just eating air.

You need to call dYe then and have a replacement sent to you or send that one in and get a new one. That would do it. Odd how it was even sealing.

[littleskittle32]

How do you put on a new trigger for the pmr? do u just pull out the trigger pin or do you have to take of the hyper 2 to take off the body, i don't know how.