Proto Matrix Rail- Questions Answered!

[Terminate]

depending on the trigger i just popped the pin and slid it out the trigger guard, then put the NDZ slik trigger right up in there...

[StumpyManager]

Yeah, the trigger install is pretty simple. Just a lot of brute force and lube (im sure theres a sick joke in there somewhere). But, the back trigger pin shouldnt be touching. Otherwise you know you put it in too far back

[protofreak]

Originally Posted by StumpyManager

Yeah, the trigger install is pretty simple. Just a lot of brute force and lube (im sure theres a sick joke in there somewhere). But, the back trigger pin shouldnt be touching. Otherwise you know you put it in too far back

you did somthin wrong thin if its took brute force and lube mine slid right in i had more trouble getting the pin in then getting the trigg in the right spot

[Terminate]

yah mine just slid right in np

[Basfire5]

I just bought a PMR (totally stock) and i am wondering what i should upgrade first. I've heard to upgrade Back cap, and so I ordered a New Designz Back Cap, but what else should I up? Besides the UL frame of course, bcuz ill have to save up for months to get it. So what parts should I buy, and made by who? AKA I'd like to know not only that I need a barrel, but what type. I am planning on a pepperstix kit, since i can get it 40% off and I heard that they are comparable to freaks

[Terminate]

i'm not pro so i just bought a dye ultralight barrrel with a .692 back to shoot basically any paint just fine. also NDZ back cap or the Dye aluminum one are both great... Next i'd get NDZ slik trigger or if your waiting for UL frame i guess u could just use stock trigger, I'm not plannin on an UL frame for a while so I put a slik trigger on. That's about all that really needs (or has) upgrades atm besides aluminum eye covers and feednecks. Also if you like eyes that put off like they are like 30 bucks but i haven't bothered with those yet. (although i'd try and get blue cause all my gear is black/blue and my gun is all black atm.

[StumpyManager]

Hey, does anybody know how to reset everything on the board? I was trying to reset the bps, but i got lost and now its shooting 7 or something. HELP!!!

[Terminate]

i dunno if there's a mass reset on board but if you go into programming mode (switch number 2 turned on) go the the setting orange/yellow (not blinking just solid) and hold the trigger untill it starts to blink. it'll blink the number of times your previous setting, then just click it 18 times for cap of 26 bps should do u just fine... hope that helps

[StumpyManager]

Thanks

[Basfire5]

Hey

Well my new PMR WAS working great...
the other day, it randomly deicded to start leaking, and i cannot figure out what is wrong. I think I may have put the bolt in the wrong way, since the alignment screws on mine are missing...
Then when i went to change the position on the HPA tank, my battery wires broke.
Can anyone help me with my leak problem?
I changed some o rings, re-lubed the bolt and ASA, and it still wont work

[Basfire5]

What trigger is better for the PMR, the NDZ SLik or the Edge trigger?

[Terminate]

haven't tried both triggers but i can tell you, for me personally, the slik trigger rips hard and fast...

[redracer]

what is the best dwell settting for summer time on the pmr

[protofreak]

mines at 18

[StumpyManager]

Like that guy, i have only tried the slik trigger, but i think just from looking at it, the edge trigger was made more for looks than performance. The fact that its much fatter than the slik already gives it a downside, and also i'd trust new designs more since protos letting them have all the upgrades. Get the slik.

[xxxnewjerseyxxx]

Now, this is what my two friends claim. I am not saying i believe them, then again, i'm not going to say i don't, considering they are half-retarded.

Teammate Dan just bought his pmr and decided to check out the board. he ends up pulling a wire and the grip frame just starts sparking and flaming.
He ended up getting a new one, but still, that's ridiculous.

Anyway,
I just bought my pmr a few days ago and used it at my local field. It shot extremely well, it's range was very appealing, and it was very accurate.
Unfortunately, and as stated above, all matrixs are major gas hogs. I was refilling my 47/3000 crossfire after every game, shooting only two hopperfulls.

[Basfire5]

Originally Posted by xxxnewjerseyxxx

Now, this is what my two friends claim. I am not saying i believe them, then again, i'm not going to say i don't, considering they are half-retarded.

Teammate Dan just bought his pmr and decided to check out the board. he ends up pulling a wire and the grip frame just starts sparking and flaming.
He ended up getting a new one, but still, that's ridiculous.

Anyway,
I just bought my pmr a few days ago and used it at my local field. It shot extremely well, it's range was very appealing, and it was very accurate.
Unfortunately, and as stated above, all matrixs are major gas hogs. I was refilling my 47/3000 crossfire after every game, shooting only two hopperfulls.

This is true, but i dont know about the sparking (retarded may be a good word for "Teammate Dan"). Pulling a wire would only cut the power, not casue it to short out. But on my PMR, the first time i removed the board i accidentally ripped a batter wire out, because it was very poorly attached. I informed Proto and within a week i had a new harness, which has thicker wires and less excess wiring. This new one fits great, and is very sturdy. And I would check for leaks or maybe a bad dwell setting, since i can shoot about 800 shots on a full 48ci 3k with my PMR.

[protofreak]

Originally Posted by Basfire5

. And I would check for leaks or maybe a bad dwell setting, since i can shoot about 800 shots on a full 48ci 3k with my PMR.

thats seems a little high but owell i can get 1150 to 1300 off my 68/4500

[Basfire5]

The 800 was in nearly perfect conditions, and fps at just 250 (indoor play)

[Terminate]

yah the 250fps would make a diff since i run at 290 +/- 4 i got about 600-700 on the same fill with a dwell of i think 19 atm...