pbReview.com - Paintball Reviews and Paintball Fields

  Join pbReview.com  |  Log In  
pbReview.com - Paintball Reviews and Paintball Fields

Search:

  
Home     |     Paintball Articles     |     Paintball Videos     |     Paintball Gear     |     Paintball Fields     |     Paintball Stores     |     Hot Deals     |     Paintball Forums     |     Chat
Go Back   Paintball Forums > Specific Marker Forums > Dye Precision


Reply
 
Thread Tools Display Modes
Old 04-15-2007, 06:32 AM   #81
PBfire1
Ball-N-
 
Join Date: Mar 2007
It sounds a bit like what happened to me last weekend. I had to mess with my hyper 2 reg for about an hour to get it right. Make sure you set it and fire about 10 shots before adjusting the hyper 2 again. Raise and lower SLOWLY.
PBfire1 is offline   Reply With Quote
Old 04-17-2007, 08:32 PM   #82
StumpyManager
Somebody hand me a pod!
 
StumpyManager's Avatar
 
Join Date: Feb 2007
Location: Seattle
Send a message via AIM to StumpyManager Send a message via MSN to StumpyManager
Speaking of Hyper 2's

so i was trying to take apart my hyper 2 last weekend, but when i put both allen keys in where they needed to be, only one of them came loose, and like, it was like that for 30 minutes and then i gave up

i tried to conctact DYE, and the vid of dissasembly of one on Youtube, but it just never came loose. Is there an easier way?
__________________
CHECK THIS OUT!!

http://i17.photobucket.com/albums/b5...rotoPMR019.jpg

37% of all paintball teams have a fat kid playing for them, if you are that fat kid put this in your sig

Paintball Blog of Yours Only http://stumpymanager.spaces.live.com/
StumpyManager is offline   Reply With Quote
Old 04-22-2007, 05:10 PM   #83
lucifer_sam
Monogamy is for suckers.
 
lucifer_sam's Avatar
 
Join Date: Feb 2007
I recently bought a PMR and I've been on the warpath trying to upgrade everything under the sun. I managed to get everything including a DraXxuS Pulse, but I really wanted to get the RF module.

As of now, it seems that the trigger frame is slightly cramped. Will the RF module for the Pulse fit inside the stock trigger frame?
lucifer_sam is offline   Reply With Quote
Old 04-22-2007, 05:24 PM   #84
protofreak
dye fan
 
protofreak's Avatar
 
Join Date: Dec 2006
Location: Humble tx
it will but it wiil be tight
since you have been in a mad dash to up everything a newdesignz pro-light frame they have made extra room in it just for the rf module
__________________
Clear/black Dm9
Black 06 Proto Matrix Rail
-ul frame and Virtue eyes, 14" dye ul barrel
Green Halo B w/ rip Drive
-b2 board, virtue crown ultra soft
68/4500 pure energy tank
- dye rhino cover
http://www.myspace.com/danielpbplaya
http://s195.photobucket.com/albums/z236/Fragmortus/
protofreak is offline   Reply With Quote
Old 04-23-2007, 04:48 AM   #85
bigwood212
Registered User
 
Join Date: Feb 2007
how is it tight? Just tuck the chip above the board in the back of the frame. There is pleanty of room in there. And it wont even be falling out or anything when you open the grip.

I did the same thing with my regular frame and my ul frame.

Last edited by Uziel Gal : 04-24-2007 at 10:57 PM.
bigwood212 is offline   Reply With Quote
Old 04-24-2007, 08:25 PM   #86
darktrooper5
Moderator
 
darktrooper5's Avatar
 
Join Date: Oct 2003
Location: Potomac Falls, VA
Send a message via AIM to darktrooper5
I've tweaked this thread a bit, added some questions,answers and some information here and there.
darktrooper5 is offline   Reply With Quote
Old 04-27-2007, 08:41 AM   #87
ilikepaintball7
Registered User
 
ilikepaintball7's Avatar
 
Join Date: Oct 2006
whats the pmr's highest bps capibility and in what mode.
__________________
Paintball Authority Kids D3 Nppl
ilikepaintball7 is offline   Reply With Quote
Old 04-29-2007, 05:48 PM   #88
chitownballa19
contract killer
 
chitownballa19's Avatar
 
Join Date: Jan 2007
Location: *708*
Send a message via AIM to chitownballa19
the stock board is capped at 30 bps, and you can shoot it in whatever mode you want.
__________________
~MW~
chitownballa19 is offline   Reply With Quote
Old 04-30-2007, 11:56 AM   #89
protofreak
dye fan
 
protofreak's Avatar
 
Join Date: Dec 2006
Location: Humble tx
Quote:
Originally Posted by ilikepaintball7 View Post
whats the pmr's highest bps capibility and in what mode.
28-30 but the modes youll have to use to get that high are the nxl and psp
__________________
Clear/black Dm9
Black 06 Proto Matrix Rail
-ul frame and Virtue eyes, 14" dye ul barrel
Green Halo B w/ rip Drive
-b2 board, virtue crown ultra soft
68/4500 pure energy tank
- dye rhino cover
http://www.myspace.com/danielpbplaya
http://s195.photobucket.com/albums/z236/Fragmortus/
protofreak is offline   Reply With Quote
Old 05-01-2007, 04:35 PM   #90
pb_freak_57
Registered User
 
pb_freak_57's Avatar
 
Join Date: Nov 2006
im kinda new to the rail and read the manual and still kinda dont understand what dwell is. can any please explain it and how it works?
pb_freak_57 is offline   Reply With Quote
Old 05-01-2007, 05:06 PM   #91
darktrooper5
Moderator
 
darktrooper5's Avatar
 
Join Date: Oct 2003
Location: Potomac Falls, VA
Send a message via AIM to darktrooper5
Dwell is how long your bolt stays forward. It controls your bolts travel time basically. Lowering your dwell gets you lower velocity, shootdown, but higher gas efficency in some cases. A really high dwell, increases velocity, can slow your marker down and sucks up more air.

A balance is key. Your stock dwell is 25, break you marker in for a few weeks/months before you touch your dwell.
darktrooper5 is offline   Reply With Quote
Old 05-02-2007, 06:00 AM   #92
pb_freak_57
Registered User
 
pb_freak_57's Avatar
 
Join Date: Nov 2006
okay thnks
pb_freak_57 is offline   Reply With Quote
Old 05-02-2007, 06:32 AM   #93
wrath_ltd
rookie
 
wrath_ltd's Avatar
 
Join Date: Mar 2007
Location: Lexington,SC
Send a message via AIM to wrath_ltd
has anyones batterie harness come off the board and also the feedneck on mine was brittle...
__________________
mmm...I love that smell...the smell of accomplishment.
Need prayer? Try limedot.org.
wrath_ltd is offline   Reply With Quote
Old 05-02-2007, 10:31 AM   #94
darktrooper5
Moderator
 
darktrooper5's Avatar
 
Join Date: Oct 2003
Location: Potomac Falls, VA
Send a message via AIM to darktrooper5
Those guys like to break, you have got to be careful when dealing with them
A PM5/6/Dm4/5/C Harness will work.
darktrooper5 is offline   Reply With Quote
Old 05-04-2007, 06:33 PM   #95
lucifer_sam
Monogamy is for suckers.
 
lucifer_sam's Avatar
 
Join Date: Feb 2007
My Rail recently started leaking gas from the barrel as I put it on. I took the bolt/manifold out, checked for torn o-rings and re-lubed everything, and it was still going. I don't think anything could have happened to the noid or the valve, so I'm guessing it might be some misalignment of the manifold. Anything I can do to check?
lucifer_sam is offline   Reply With Quote
Old 05-05-2007, 05:24 AM   #96
protofreak
dye fan
 
protofreak's Avatar
 
Join Date: Dec 2006
Location: Humble tx
make sure your little guide screw are in and in the right place and that your bolt can is screwed all the way into your manifold
__________________
Clear/black Dm9
Black 06 Proto Matrix Rail
-ul frame and Virtue eyes, 14" dye ul barrel
Green Halo B w/ rip Drive
-b2 board, virtue crown ultra soft
68/4500 pure energy tank
- dye rhino cover
http://www.myspace.com/danielpbplaya
http://s195.photobucket.com/albums/z236/Fragmortus/
protofreak is offline   Reply With Quote
Old 05-10-2007, 03:07 AM   #97
sdwella
tw룣
 
Join Date: Jul 2006
Location: mid tenn
Send a message via MSN to sdwella Send a message via Yahoo to sdwella
what type of grip replacement will fit the stock trigger frame????
__________________
tw룣
sdwella is offline   Reply With Quote
Old 05-10-2007, 12:28 PM   #98
ilikepaintball7
Registered User
 
ilikepaintball7's Avatar
 
Join Date: Oct 2006
i have 2 questions. does the pmr run on lp tanks or hp tanks?
number 2. when screwin in my tank, do i need to adjust anything before i put it in or just screw it in. i dont wanna mess anything up but im guessing just screw it in.
__________________
Paintball Authority Kids D3 Nppl
ilikepaintball7 is offline   Reply With Quote
Old 05-10-2007, 09:55 PM   #99
Mephisto21
Mephisto21
 
Join Date: Apr 2007
Location: Germany
quick question and sorry if this is on another thread. how hard is it to put the dye UL Frame on. i know it is kind of a newbie question, but i don't want to mess up my gun.

Last edited by Mephisto21 : 05-11-2007 at 03:10 AM. Reason: because
Mephisto21 is offline   Reply With Quote
Old 05-11-2007, 03:20 AM   #100
protofreak
dye fan
 
protofreak's Avatar
 
Join Date: Dec 2006
Location: Humble tx
Quote:
Originally Posted by ilikepaintball7 View Post
i have 2 questions. does the pmr run on lp tanks or hp tanks?
number 2. when screwin in my tank, do i need to adjust anything before i put it in or just screw it in. i dont wanna mess anything up but im guessing just screw it in.
it will run on either but hp is better
and for if you have to ajust anything the rail is set to go out of the box

Quote:
Originally Posted by Mephisto21 View Post
quick question and sorry if this is on another thread. how hard is it to put the dye UL Frame on. i know it is kind of a newbie question, but i don't want to mess up my gun.
its as simple as taking the old one off unhook the eyes and noid then re hook them up to the ul board and put the new frame on
__________________
Clear/black Dm9
Black 06 Proto Matrix Rail
-ul frame and Virtue eyes, 14" dye ul barrel
Green Halo B w/ rip Drive
-b2 board, virtue crown ultra soft
68/4500 pure energy tank
- dye rhino cover
http://www.myspace.com/danielpbplaya
http://s195.photobucket.com/albums/z236/Fragmortus/
protofreak is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 05:42 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Help / FAQ  |  Contact Us  |  About Us  |  Advertising Info  |  Link to Us  |  Privacy Policy  |  Terms of Use
Top

Paintball Review

Copyright © 2000-2007 Hillclimb Media