Proto Matrix Rail- Questions Answered! - Page 7

allstargreek7 · 06-28-2007, 02:39 PM

anyone know where i can find the stock pmr eyes?

protofreak · 06-29-2007, 03:56 AM

dye would have them

drummer8332 · 07-03-2007, 09:12 PM

i got my pmr the other day and went to the feild to test it out
all day when i would start walking my gun the balls would shoot like 10 feet but otherwise it shot fine
do i just need to break in the reg or is it a dwell problem

protofreak · 07-03-2007, 09:31 PM

reg pressure might be low or dwell is set too low

drummer8332 · 07-04-2007, 08:24 AM

my dwell is set at 25
what would you recommend?

protofreak · 07-04-2007, 02:32 PM

relube the bolt and chec what pressure the reg is set at

allstargreek7 · 07-04-2007, 06:31 PM

odd problem, i had messed with the dwell, and i didnt know what was wrong, i called up dye, and they told me how to fix it and so on, but then i saw that when i aired it up, it wouldnt shoot. what do you think is wrong with it

protofreak · 07-04-2007, 06:58 PM

wjhat eles is it doing bsides not shooting clicking, leaking ...

darktrooper5 · 07-04-2007, 09:33 PM

Quote:

Originally Posted by allstargreek7

odd problem, i had messed with the dwell, and i didnt know what was wrong, i called up dye, and they told me how to fix it and so on, but then i saw that when i aired it up, it wouldnt shoot. what do you think is wrong with it

Is your dwell at 25?

allstargreek7 · 07-05-2007, 12:24 PM

Quote:

Originally Posted by darktrooper5

Is your dwell at 25?

yeah, i called dye up because my gun wasnt making the clicking noise, so they told me to set my dwell to 25, so then i did. then i tried airing it up and all it did was make the clicking noise

bigwood212 · 07-05-2007, 12:43 PM

your dwell is still set wrong. Go to the dwell color hold down the trigger. It will blink the number of times it is set at. After it stops blinking pull the trigger 25 times. Then put the switch down.

BoogerTHEfantom · 07-05-2007, 12:59 PM

Get a small PMR repair kit. O-rings are a real pain in the aspirin box, and they WILL break on you. I broke the wires to my battery harness a few weeks after buying it. Called Dye and they sent me a new one. Month later, that one broke. Luckily I had one from my kit that I had ordered just in time to put in. This is the 1st to be of a reasonable length. If this one breaks, I shalt be very pissed.

protofreak · 07-05-2007, 07:07 PM

first off booger be gentle then thell stop breaking

and second if its making the clicking noise with the air attached then ur reg might be set to zero cuz if it clicks its shooting

dannypaint1 · 07-08-2007, 11:27 AM

wht is a good dwell setting for a pmr?

darktrooper5 · 07-08-2007, 01:24 PM

protofreak · 07-08-2007, 07:08 PM

18 if its warm out and 23 if its cold and 14 if u have an orange bolt and hatersauce

darktrooper5 · 07-08-2007, 09:09 PM

25 until your gun breaks in. Lowering dwell too soon can cause issues, there's no need unless you have a different bolt or the country frezzes over.

Edit: I've tossed more information on the first page concerning dwell, wiring, the Special Editions and more.!

allstargreek7 · 07-11-2007, 10:51 PM

idk wats up with my gun... when i have my tank on and i start changing the pressure, it starts leaking... what should i do...?

darktrooper5 · 07-12-2007, 06:16 PM

Make sure that you are not turning your reg too high or to low, small turns. And where is it leaking from?

allstargreek7 · 07-13-2007, 11:12 PM

well right now... its leaking from the front somewhere...