CO2 use

drunic · 06-02-2008, 08:20 AM

is there some knid of way to not use as much co2? I switched from a old spyder with a 12oz tank, and i could shoot about 600rd with a full tank. my sp-1 (wich does not have sel-fire mode) shoots about 400 on a 20oz tank.

SavageBall666 · 06-02-2008, 05:50 PM

is there any leaks? if not your velocity is probably high and you gun might need to be broken in more

iliveforthis99 · 06-02-2008, 05:52 PM

What dwell setting are you using? The HPA or CO2 dwell setting?

drunic · 06-03-2008, 06:38 AM

i don't have any leaks that i know of, and i have my dwell set for co2. i have only played one day with it and this weekend i am going to use it again. after this weekend im going to send it off to Smart Parts for the upgrade. I think that my velocity was at about 300-310.

iliveforthis99 · 06-03-2008, 11:52 AM

The single mode board has nothing to do w/ efficiency. And i would just keep the board you have, it'd be a waste of time getting the new one since you don't need the other modes. Try back the velocity down a little to around 280 and check your paint to bore match as well.