Your New Impulse Upgrade and Maintenence Place

[toothpastedog]

Your New Impulse Upgrade and Maintenence Place

Free Installation With Any Purchase (If You Want)

Hello all you good people with impulse-

I will shortly have my own ebay account and once some legal issues reguarding wavers and liability are finalized, i am going to begin to take guns to fix, upgrade, or just fine tune. I will charge 5-20$, depending on what i am doing, and the gun's owner will pay for shipping both way plus new parts/seals on broken guns. i will shortly have a specific rate of my rates.

right now i am just going to ask a friend of mine, who just happens to be one of our good judges of cali, about liability issues in california and if i can have risk/liability signed away through a waver. this is for my protection, i am not trying to scam anyone, i just do not want to get scammed myself.

i will install any part, plus if you do not have the part/s already i will also purchase them for you. i will be able to sell you products at the same price as EPBO, so in other words, CHEAP! my tune up services range from fine tuning your lpr to putting better springs in your ball detents to work better with different hoppers. just as i am in my articles here (i by the way have written 7 articles for the ultimate sticky), i will be thorough, percise, and above all, friendly, on time and honest. i will also be using PayPal and i will ship via UPS.

thank you. please post any suggestions. my ebay name will probably be toothpastedog.

my best posts are:
Rat Jr. FAQ
What Does An Lpr Do and How Does An Impulse Work
Tank/Regulator FAQ
What's A Soleniod
All About Delrin
A View On Upgrading
Sweet Spotting

here are some prices:

Prices:
Trigger Frame installation for standard trigger frames: 10$
Includes:
-OTB frame (old and newer versions)
-AI frame
-I-frame (any version)

Trigger Frame installation for trigger frames with micro switches: 15$
Includes:
-PTI frame
-Werm Frame
-Preditory frame

Trigger installation: 5$
Includes:
-Every trigger available for purchase… ever

Trigger adjustment: 5/10$
Includes:
-5$: Every trigger available for purchase… ever
-10$: Every frame (except AI frame) available for purchase... ever

Custom trigger jobs: 20$
Includes:
-AI frame/Old Strange Trigger Frame (will make your pull aprox. .8mm-2mm)



Circuit board installation: 10$
Includes:
-Blue Light Cricket Board
-Blue Light Vision Cricket Board
-W.A.S. Board
-Genesis Board (new on/off +15$)
-Does not include Morloc Boards
-I Do Not Do ECS Boards or ECS Programing



-New Bolt/Pin installtion: FREE

-New Valve cap installation: FREE



Tune Up w/o LPR (fix fdso): 5$

Tune Up w/ lpr (fix fdso): 10$

New O-rings/Solenoid Gasket: 5$
-Plus the cost of new o-rings/gaskets

Clean Solenoid: 10$

Check Up: 5$ Base



Tapeworm/similar product installation plus free tune up: 5$

HFV/HFA/VFF installation plus free tune up: 15$

New Gauge for LPR: 10$
-Dye Mini Gauge: 20$

New Valve Installation and tune up: 15$

New Feed Tube Installtion: 5$

Polishing internals: 5-20$

New Ram, Hammer, or Hammer Assembly and tune up: 20$

New Solenoid: will get this shortly, probably 50-90$ though



VFF/HFA/HFV Holes drilled: 20$
Holes drilled in brass hammers:
Includeds:
-W/ Brass hammer: 30$
-W/O Brass hammer (you sent me yours): 15$

Will work on automags, the new shocker, autocockers (perferibly with eblades/racegun frames, but pneumatic cockers are okay), angels, M98’s, spyders (clones too), and most other guns.

for an extra 5$ i will include a 2-20 page manual with picture on how to install/adjust the parts i worked on or installed.

-----------------------------------------------------

And Now For Parts

-----------------------------------------------------

Free Installation With Any Purchase (If You Want)

Impulse Markers:

-Impulse w/ Vertical MaxFlo [Black]: $425.00
-Impulse Vision Vertical Reg (black): $550.00
-Impulse College Pack Stage 2 (Black Impulse with vertical mounted maxflo reg, Adjustable blade trigger, ND LPR nipple, and ANS Jackhammer II LPR): $485.00
-Impulse SLP (The Impulse marker, The Smart Parts Low pressure regulator, LPR adapter, and the great new ND reverse polarity Pro-Magnetic blade trigger): $500.00



Impulse Air Mods:

-LPR Nipple (New Designz): $14.50
-ND AFF/HFA Angled full flow (New Designz): $47.50
-ND Angled ASA (New Designz): $34.95
-ND VFF/HFV (New Designz): $43.00
-Evil Bolt and Pull Pin (Evil Paintball): $39.95
-Evil Valve for Impulse (Evil Paintball): $29.95
-Evil LPR for Impulse (Evil Respirator)(black) (Evil Paintball): $85.00
-New Designz (RIP) GMFV Valve (New Designz): $32.95
-New Designz LPR Kit (black/blue/red/silver/green/purple) (New Designz): $99.95
-SP Mini Maxflo LPR Kit (red/silver/black/blue)(Smart Parts): $79.95
-Smart Parts Tapeworm (black/blue/red/silver/green/purple)(Smart Parts): $18.75
-Warped/Function Valve (Function): $35.00


Triggers and Frames:

-Nd Blade Trigger (not magnetic)(New Designz): $25.95
- Nd Pro-Magnetic Blade Trigger (black/blue/red/silver/green/purple) (New Designz): $32.95
-OTB 90* Frame with Magnetic Trigger (blue/silver/red/black)(Off The Break): $125.00
-Warped/Function Triggers (silver/black) (Function): $25.00
-CP Roller Trigger for Impulse (blue/red/silver/black/purple)(Custom Producst): $35.00


Internals:

-Nd Slick Shot Ram Shaft (New Designz): $27.95
-Nd Titanium Pull Pin Flat (New Designz): $18.95
-Evil Super Pack (lpr, valve, hammer,ND bolt)(Evil Paintball) $189.95
-Nd Titanium Pull Pin Round (New Designz): $18.95
-ND Delrin Bolt (white/black) (New Designz): $32.50
-Rat Hole Hammer Stainless Steal (New Designz): $20.00
-ND/Rat Stubby Bolt (white/black) (New Designz): $32.50
-New Designz Hammer Assembly (black/blue/red/silver/green/purple) (New Designz): $42.95
-ND Hammer Assembly (w/ rat hole and silk shot ram)(black/blue/red/silver/green/purple) (New Designz): $87.95
-Rat Factory Kit (black/white bolt) (New Designz): $119.00
-Ratified Kit (bolt, slick shaft,Ti pin, & Rat hole)(white/black bolt) (New Designz): $90.00
-Warped/Function Delrin/Aluminum Bolt (Function): $39.95
- OTB Blind (no chop) Bolt for Impulse (Off The Break): $29.95


Feed Necks:

-New Designz "Halo No-Rise" (black/blue/red/silver/green/purple) (New Designz): $25.00
-Twister Low-Rise (red/silver/black/blue)(Smart Parts): $35.00
-New Designz Clamping Feed Neck (Impulse/Shocker) (black/blue/red/silver/green/purple) (New Designz): $30.00
-New Designz Low-Rise (black/blue/red/silver/green/purple) (New Designz): $25.00


Miscellaneous:

-New Designz Ball Detent (short) (black/blue/red/silver/green/purple) (New Designz): $13.98
-New Designz Ball Detent (long) (black/blue/red/silver/green/purple) (New Designz): $13.98
-ND Eye Cover (flame) (black/blue/red/silver/green/purple) (New Designz): $25.00
-ND "Talon" Snatch Grip for Impulse (black/blue/red/silver/green/purple) (New Designz):$25.00
-ND Strip (thin) Eye Cover (equalizer ready) (black/blue/red/silver/green/purple) (New Designz): $25.00
-New Desginz Board Tray w/ Flame Milling (silver/black.red/blue) (New Designz): $38.95

Free Installation With Any Purchase (If You Want)

------------------------------------------------------

Don't Forget Though, That There Are Many Other Good Places To Buy Things That Are Advertised Here On PBReview Too

[sweathogs]

I suggest you get a PayPal account to receive payments.

Open a UPS account so you can mail merchandise back.

eBay account is great for selling.

Let me know more details. My imp may need a tuneup.

[master_chadwick]

Thats pretty freakin sweet mike, I hope this all goes well for you, I will be sure to spread the word through out maine when playing rec ball and tourneys alike. You of all people should have this buisness, you are well to put it short a paintball tech king, i aspire to gain as much knowledge and expierence as you. once again you are the Cheif. Hopefully we will get to play together this summer. keep up the good work.

[master_chadwick]

No problem.......oh and if golf doesn't work out we could always play kick the can, or even, the wonderful game of 52 pickup

[Muskrat]

Ill be sure to spread the word too.

[joedirte]

Yeah and you should write a thread on lubing the impulse too! I'm not sure if its normal, but the guy I bought mine off of has it ALL over the ram housing. Should there be that much or should it just be a light coat of it on the o-rings. It's the same way when I take off the hammer cap. Lube all over the place inside. I suspect that is ok in there though. I plan on getting the NDZ Ram housing assembly, just need to know how much lube to put on it.

[shortman506]

i might need you to tune up my OTB frame, the trigger is feeling "crunchy" and no one over here really knows how to fix it. do you have an estimate on what that will cost?

[pb_fool]

Not to steal TPD thunder but on the lubing of impulse. You want to just have the o-rings lube. If your seeing pink on your ram housing or their o-rings its way to much. This is the first time in your life seeing "pink" will be bad.

I'll spread the word here in Montana TPD.

[cockerguy182]

toothpaste your awesome, first, you help everyone with there prob's, then, my dog poo'ed all over my carpet, and now your willing to help people for a small fee ?!?!?! does it get any better ??!?!?!?!

[Ken448]

Fixing FSDO
Modifying stuff
Making the OTB SUPER SNAPPY LOOKIE HERE
Installing a VFF on a non drilled Imp (you drill hole) its easy
removing stripped screws
Tuning ECS Boards
Installing ECS
Modifying a Ram Assy. to have ZERO Drag
Noid Mods
Bolt Mods
Polishing stuff (If you know how)
Drilling Stock Hammers..


hahahahahahahahahahaha all these things to do with Imps.

do you deal with cockers too??

Man I could be rich LOL

[The7thDragon]

dude thats great

if i every have rat problems again im sending it to you this time.

Good luck with this business venture man

[Ken448]

haha if you ever shot my Nasty you would see the point

[toothpastedog]

another update, i will probably be selling pretty much ever part for the impulse too so you will be able to buy things for me too, and by the way, did i mention they would be not much $$$ i also cleaned everything up, so now just read my first post for all the info.

[toothpastedog]

updated with some prices and items

[toothpastedog]

quite competative prices too, as you can see

[Ken448]

instead of "inconspicuously" upping constantly.. just beg for a sticky... get well known people will come to you... They never leave me alone.....

[Calebd2]

Added.

[toothpastedog]

thank you.

[toothpastedog]

Free Installation With Any Purchase (If You Want) not that it wasn't obvious . thanks, i just noticed this post got like 100+ more hits within the last 15 minutes. thank you.

[Beatmanias]

how much will u charge for solenoid cleaning? I am really afraid to do it myself cause i blew it up last time.