Picture Thread

[GM Custom]

Here's 1 of 3 spyder compact & targa I mod with some old airsoft parts
this is just a ruff proto and I'm still looking for real styer aug clip for it.
I will post pics of the p90 & mp5 sd6 soon .

[413sonix]

Sick, just plain sick. No they're not my guns.

[ded_n_buried]

Not really all that custom...
BUT.......Here it is.......

[wulf1010]

Well, this is my newest...Custom? o_O...not realy sure if i should call it that actually. Its just a system x bas with some chops. It has been shortened 1" off the rear of the gun, I've cut way the top tube till about 3/4" from the air port, the fronts been cut down to nearly the valve air chamber. The coolest thing is the backs been trimmed down till you can see into the bottom tube of the gun, i get a kick watching the hammer go back and forth lol.

it was a home project, done with house hold tools, hack saw, dremel, sand paper, and files. Only power tools were a chop saw and table top sander. Thus its a bit rough, and befitting a super low budget, spare parts job it got a rattle can out fit.

[sniperx52]

ok. my paintball grenade launcher




wit ma gats

pimp eh?

[Vern1]

Greetings,
A real custom to wake things up a little in the land of bolt-ons, the NadaCocker:






Yes, it works....yes, it IS fast....NO, you can't have it, I BUILT IT AND IT'S MINE!!!!!
NadAgain (NadaCocker II) is undergoing testing now....my son shot lots of fools with it last weekend.....

Edit: the Palmer stuff is uber-cool.....and CUSTOM!!!!

[joskripin]

my Impulse on Dye DM4 Frame.
-Evil valve/LPR.WAS
-Rat Hammer.CCM.NDZ. etc..etc freak!

[Sevenfold]

my old cocker (stolen)



and my Brass eagle Tigershark (sold)

[going_home]

The last of these bodies were made in 2000 by Pro Team Products.
PTP saved the last 10 to do a special edition marker.
In the meantime they were in a box that got lost in moving from one building to another. The box was found early 2007 and I bought the body and foregrip.
The gas thru and barrel were sent to Rainman on MCB to make them dust black.
And the foregrip needed to be tapped on the other side so I could use my reverse Xvalve with ULT. Got a Redz feedneck and asa/rail and it was complete.
One of a kind.





I will be adding more later.

[AmaproPaintball]

Guess they don't allow html here, so follow the links

http://amapro-paintball.angelfire.co...s/guns_031.jpg
http://amapro-paintball.angelfire.co...s/guns_028.jpg

[Frankenstien04]

I have an original spyder compact but its far from stock.

my setup:
Halo hopper w/stock chip...upgraded internals
three different cal. barrels for paint swelling
two 24 oz co2 tanks for mid game air change
hallowed grip frame for lighten the load
dead on red dot reflex scope
rear cocking after market bolt
custom job on the trigger:
a personally machined reed inserted under the firing bolt to shorten hammer pull
a personally machined plate in front of the trigger in order to shorten the pre-pull
a nut in the rear of the trigger in order to shorten the post pull

Overall i have less than a 1/16 of an inch trigger pull.

i have done the impossible. i have a walkable mechanical trigger that puts out between 13-18 balls per sec. All my friends think that i am a serious mad scientist with an extreme love for paintball. there for they have named this gun Frankenstein.

[Macdev_Militia6]