pbReview.com - Paintball Reviews and Paintball Fields

  Join pbReview.com  |  Log In  
pbReview.com - Paintball Reviews and Paintball Fields

Search:

  
Home     |     Paintball Articles     |     Paintball Videos     |     Paintball Gear     |     Paintball Fields     |     Paintball Stores     |     Hot Deals     |     Paintball Forums     |     Chat
Go Back   Paintball Forums > General Marker Forums > Low-End Mechanical Markers


Closed Thread
 
Thread Tools Display Modes
Old 02-15-2001, 01:18 PM   #1
TLplus84
Old School
 
Join Date: Dec 2000
Location: Maryland
LOL i know everyone has been dieing for this right? I have to tell you this is a very very very small mod, but it does reduce the pull. Here it is:

WHen you pull the trigger, the sear gets pivoted, releases he striker, adn the sear comes back down and rests on a pin. If you put a sleeve on that pin, the sear is seated lower, thus it will take less trigger movement to release the striker. If your gun won't cock, use a thinner sleeve. I've also tried sponge, and taht seems to work ok too. Just get something underneath that sear, something small, and it will seat the sear lower. If it doesn't cock, remember take the item(sponge, sleeve, cloth) and get something thinner..its confusing but that's the best i could explain it.
__________________
TL+, J&J Ceramic, Taso LPC/VA, Turbo valve, Shocktech Delrin bolt, custom trigger job, inline reg, running 350 psi.
Spimmy with Fenix body in the works
TLplus84 is offline  
Old 02-16-2001, 12:02 PM   #2
TLplus84
Old School
 
Join Date: Dec 2000
Location: Maryland
don't take out the safety...it's illegal at most fields to not have a safety on your gun. ALso, it won't shorten the pull if you take out hte safty. that's jsut a myth..my friend tried it and all it did was add another hole for dirt and dust to get in. hey i sed i'd post it and i did right~?
__________________
TL+, J&J Ceramic, Taso LPC/VA, Turbo valve, Shocktech Delrin bolt, custom trigger job, inline reg, running 350 psi.
Spimmy with Fenix body in the works
TLplus84 is offline  
Old 04-26-2001, 04:45 AM   #3
bran
 
Join Date: Apr 2001
Smile

Heres an idea. I used the end of a large diameter ball point pen as a sleve (the part where the ink is in. just cut about an inch off the top where there's no ink)
then to adjust the hight I rolled some electric tape around the sleve. it worked great for me and it was very easy to adjust

oh and just incase anyone is wondering the pen i used was a sanford uniball gell grip pen

Last edited by BourneKiller : 05-05-2003 at 12:56 PM.
bran is offline  
Old 06-24-2001, 07:34 AM   #4
mikek2111987
¿Voted ©OOLEST avatar?
 
mikek2111987's Avatar
 
Join Date: Mar 2001
Location: Southeast Michigan
Send a message via AIM to mikek2111987 Send a message via Yahoo to mikek2111987
some guy did that at pbdojo, i followed his ics but did what TLplus84 said to http://forums.paintballdojo.com/show...5&pagenumber=2
i dont know y but for me the pics dont work anymore
__________________
Wow...this is one classic thread.....ah, the good ol' days of OT...
METAL MAFIA
HOOLIGAN

LP Spyder TL+
CP Flame drop
CP ASA on/off
CP Spyder adapter

Evil Pipe barrel system
BRMC Anti-chop delrin bolt
KAPP twisted cocking rod

Check-it Products 15° VA
32° spring kit
Air America Vigilante with LP spring
12v smoke revvie w/ Vortex impeller, Pbr stickers, and TurboRev board
32° Magna Port valve w/ Lapco cupseal
48/3000 Pure Energy n2 tank with Extreme Rage cover
Custom Trigger Job and lots of other home done mods
Dye mini guage
Dye sticky grips
Dye (blue) 2k3 Pants
Dye (blue) 2k2 Jersey
Dye (blue) Invision
Dye (black) Sockhat
mikek2111987 is offline  
Old 09-02-2001, 03:47 PM   #5
high adjucator
knowledgeable person
 
Join Date: May 2001
Location: jx fl
haha u weaklings!!! you think that is good try this!!!!!!

(dont do both it once i dont think it will work!)


alright this will get long and read the whole thing before performing!!!
(this cannot mess up your gun and if it does you did somth9ing EXTREMELY WRONG)
ok first you get a rubber band like that on braces and some tape (lots of it your going to be experimenting with the amounts)
anyways you put about 3 rolls of tape (cut the tape in thirds first so it wont get caught on the receiver halves) around EVERY PIN except the front trigger pin and the sear retainer pin(the one that holds the sear in place) ok now you put about 5 more rolls on the back trigger pin and put about 9 on the pin above where the trigger catches the sear and about 10 below it. (dont put in the rubber band yet) now put the halves back together. see if it cocks, if not take one roll of the pin below the sear plate. now take it apart again. replace the sear spring with the rubber band but before you do that, put literally 20 rolls around where the rubber band holds onto the pin (unless you have an rt which limits it to about 12) now put everything back together and see if it cocks.
if it doesn’t find out what’s wrong. ok here’s the OPTIONAL part
cut one coil off your trigger return spring (on the custom)

ok on the regular you can do this but not to such an effect
when you cock the gun the trigger should be pushed forwards (that’s the trick of this mod) good luck not wasting paint oh yeah if you can hold the trigger in "the sweet spot" then you can go full auto!!!

-high adjucator
-brandon anders (call me master or mud I don’t care for either )

high adjucator is offline  
Old 06-27-2002, 08:26 PM   #6
mikek2111987
¿Voted ©OOLEST avatar?
 
mikek2111987's Avatar
 
Join Date: Mar 2001
Location: Southeast Michigan
Send a message via AIM to mikek2111987 Send a message via Yahoo to mikek2111987
If anyone wants info on how to do a very simple and effective trigger job, click here.

Epoxy is a glue, a very strong one. A trigger block is a front or back block on your trigger frame, which will make your trigger pull shorter. So you wont need one. And to get the sleeve over the pin, just pop the pin out GROOVES FIRST, and hold the sleeve in place then put it back in GROOVES LAST.
__________________
Wow...this is one classic thread.....ah, the good ol' days of OT...
METAL MAFIA
HOOLIGAN

LP Spyder TL+
CP Flame drop
CP ASA on/off
CP Spyder adapter

Evil Pipe barrel system
BRMC Anti-chop delrin bolt
KAPP twisted cocking rod

Check-it Products 15° VA
32° spring kit
Air America Vigilante with LP spring
12v smoke revvie w/ Vortex impeller, Pbr stickers, and TurboRev board
32° Magna Port valve w/ Lapco cupseal
48/3000 Pure Energy n2 tank with Extreme Rage cover
Custom Trigger Job and lots of other home done mods
Dye mini guage
Dye sticky grips
Dye (blue) 2k3 Pants
Dye (blue) 2k2 Jersey
Dye (blue) Invision
Dye (black) Sockhat
mikek2111987 is offline  
Old 06-22-2003, 11:13 AM   #7
Relentless
A monkey with four asses
 
Relentless's Avatar
 
Join Date: May 2003
Location: Texas
Arrow helped a ton

It did on my 98c...

i had already moded it to what i thought was the end, but was wrong...

the only 2 mods i am yet to try are the magnetic mod, and the braces elastic mod (neeeeed to find some1 with braces!!!)
__________________
~--Relentless--~

Quote:
Originally posted by Thor the Mighty
now, i can understand if your girlfriend has elephantitus of the eyelid or something so it looks like she has an extra butt cheek growing out of her eye, or if her eyes were the color of baby mustard (diaper gravy) and she yelled out "YARRRRRRRRRRRRRRRRRRR!" when you noticed her "crusted lumberjack stare" but beyond that, its all good.
Relentless is offline  
Old 06-22-2003, 07:17 PM   #8
bobby four
Registered User
 
Join Date: Feb 2003
Location: santa monica CA
Send a message via AIM to bobby four
macroline works well, just get some needle nose pliers and hold it in place while replacing the pin

http://www.pbreview.com/forums/showt...postid=1321978

is a thread that tells you how to do decent trigger mod
bobby four is offline  
Old 06-27-2003, 05:00 PM   #9
Relentless
A monkey with four asses
 
Relentless's Avatar
 
Join Date: May 2003
Location: Texas
i used a pen spring as a sleeve... perfect for my 98c...

98c's trigger is alot easier to mod cuz the easy access, heh
__________________
~--Relentless--~

Quote:
Originally posted by Thor the Mighty
now, i can understand if your girlfriend has elephantitus of the eyelid or something so it looks like she has an extra butt cheek growing out of her eye, or if her eyes were the color of baby mustard (diaper gravy) and she yelled out "YARRRRRRRRRRRRRRRRRRR!" when you noticed her "crusted lumberjack stare" but beyond that, its all good.
Relentless is offline  
Old 10-16-2003, 01:45 PM   #10
trains are bad
 
Join Date: Apr 2003
Location: OH
The spring out of a bic clickster mechanical pencil makes the perfect front trigger spring for the 98 custom.
__________________
awbansunset.com
trains are bad is offline  
Old 01-08-2004, 07:06 AM   #11
travsstuff
I M POOR
 
travsstuff's Avatar
 
Join Date: Oct 2003
Location: KS
Send a message via AIM to travsstuff Send a message via Yahoo to travsstuff
Thumbs up braces

Braces rubber bands work great! Thanks! They break sometimes though, so you gotta replace em'.
travsstuff is offline  
Old 02-20-2004, 02:59 PM   #12
tippmannisok
 
Join Date: Feb 2004
yo i just tried this like an hour ago... it works great thanks bro!!
tippmannisok is offline  
Old 02-26-2004, 11:22 AM   #13
paintballnsc112
Im back, did you miss me?
 
paintballnsc112's Avatar
 
Join Date: Mar 2002
Location: massachusetts ____________________ marker; freeflow boxxer Field; Boston Paintball
Send a message via AIM to paintballnsc112
Quote:
Originally posted by TLplus84
don't take out the safety...it's illegal at most fields to not have a safety on your gun.
thats not true. alot of frames dont even have safetys. like the eclipse mech. blade for cockers. They do require a barrel plug or bag though.

and taking out the safety doesnt mater. if u do this mod the safety wont work unless u sand down part of it.
__________________
my marker setup...........
Free Flow Black Honed Boxxer
68/3000 pbwizard n2 duck fiber tank
small black side winder
12 " black j&j ceramic barrel & sp progresive
splatmatic 40 cal pistol w custom feed
pack
empire gladiator cradle
bright orange 98c w/ a 2 mm pull
rico ak
proud owner of a BRASS EAGLE Rainmaker
if anyone has a reg and lpr for sale or an angel ir3 90* frame pm me
Quote:
Originally posted by vengeance0789
paintballnsc112 takes the cake in this thread boys
paintballnsc112 is offline  
Old 04-08-2004, 04:26 PM   #14
IdiotWithAFlash
 
IdiotWithAFlash's Avatar
 
Join Date: Jan 2004
Location: georgia
how would u clean a barrel bag if u do shoot it?
IdiotWithAFlash is offline  
Old 04-08-2004, 05:51 PM   #15
travsstuff
I M POOR
 
travsstuff's Avatar
 
Join Date: Oct 2003
Location: KS
Send a message via AIM to travsstuff Send a message via Yahoo to travsstuff
dude what are you takin about, stick it in the washer, duh
__________________
Quote:
Originally posted by Psycho_warden
things are just...falling apart in my life. First, i run out of oreos, and now, my gun is being called low-end
My Setup

-Spyder Victor body
-'04 ESP frame (3/4mm pull, no spring)
-3A barrel
-TSC valve system
-TSC striker
-dragun reg

Pic
travsstuff is offline  
Old 06-29-2004, 11:52 AM   #16
Mitch_001
Hitman
 
Mitch_001's Avatar
 
Join Date: Jun 2004
Location: Lethbridge, Alberta, Canada
two words DuckTape place layers on the sear
Mitch_001 is offline  
Old 08-26-2004, 10:19 AM   #17
mangyan
Registered User
 
Join Date: Aug 2004
Location: Canada
Send a message via Yahoo to mangyan
trigger job

here's what i did with my TL+
some of you might not like it coz it involves drilling you frame
but hey,it's your gun right,get drill bit a bit smaller than 3/16
drill the hole out and put in a 3/16 roll pin you may have to grind the pin for exact length,then drill another hole whre the trigger spring is,tap it 8-32,get an 8/32 screw cut it at 7/16 length,screw it in from the bottom(trigger housing)you may have to grind the screw a bit coz not all guns are the same,and you know what,the head of the screw will work as trigger stop
now you cut your triggeer pull by 50%

note:if the trigger doesn't release the sear,you unscrew it a bit until it release

Last edited by mangyan : 08-26-2004 at 10:31 AM.
mangyan is offline  
Old 11-03-2004, 02:49 AM   #18
Paintballhitman
Registered User
 
Join Date: Jul 2004
Location: wisconsin
Send a message via AIM to Paintballhitman
Pirahna trigger mod

Here it is two 1/2 inch cable wall tacks and some hot glue later put it side by side with my freinds electro set at 10 bps
and it was shooting right with it so it seems to mork great relpy if you like it

http://img71.exs.cx/img71/8915/PA280029.jpg
Paintballhitman is offline  
Old 04-12-2005, 07:09 PM   #19
Algernon
In Iraq (again)
 
Algernon's Avatar
 
Join Date: Apr 2005
Location: rural iowa
remove the spring on your trigger shoe. really, you don't need spring on your trigger shoe, as the sear is what you really pull and trip. on certian markers you can swap out a much lighter sear spring, like the tippmann 98.

i don't know if it is the light drive spring, but the 98 will allow you to swap out lighter sear springs. there shouldn't be any problems with the sear not catching hammer. my 98's trigger is lighter than my swing trigger autococker.
Algernon is offline  
Old 05-06-2005, 12:18 PM   #20
TLplus84
Old School
 
Join Date: Dec 2000
Location: Maryland
It's been 4 years, and this thread is still stickied..woah.
__________________
TL+, J&J Ceramic, Taso LPC/VA, Turbo valve, Shocktech Delrin bolt, custom trigger job, inline reg, running 350 psi.
Spimmy with Fenix body in the works
TLplus84 is offline  
Closed Thread



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 12:10 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Help / FAQ  |  Contact Us  |  About Us  |  Advertising Info  |  Link to Us  |  Privacy Policy  |  Terms of Use
Top

Paintball Review

Copyright © 2000-2007 Hillclimb Media