Need Rebel Help? Look no further! - Page 8

athos1307 · 07-11-2002, 07:59 PM

i have a rebel VTL and want a sight rail on it. I was wondering if this was somehow possible and i not really interested in if people think that i should have one or not. I just want to know how to do it. Thanks.

32degreesking · 07-12-2002, 02:54 PM

i dont think so because the pin is sticking out of where the sight rail goes

Killious · 07-26-2002, 03:35 PM

I have a Rebel 2002 xtreme and i am having a problem with the bottom regulator/gauge. For some reason my gun retains CO2 even after i unscrew the tank and it slowly leaks out over time back through the area where you screw in the CO2. Does anyone have any help on this subject or had the problem themselves?

MNsniper · 07-26-2002, 06:51 PM

the xtreme 2002 hing i normal as far as i know. my friend has one and his does that to. so i don't think it's anything to worry about.

<~~~ i love that guy

MNsniper · 07-26-2002, 06:55 PM

to the sight rail guy, you have 2 options. theres an upgrade kit made by 32* that ilncludes a sight rail and a rear cocking bolt, or you can custom the connecting pin and cut it so none of it sticks out above the body.

this guy rocks

Killious · 07-27-2002, 12:24 PM

But what happens if i try to use a high preasure tank on my gun? Has anyone tried using a hp tank on a rebel xtreme? If they have what happened after?

Killious · 07-30-2002, 07:54 AM

come on someone please tell me if a hp tank would work on the rebel xtreme with its gas retention problem

jayknow · 09-05-2002, 07:46 PM

Ok I have a rebel deluxe. Does the parts for the 02 series fit on older rebels?

rebeljay · 09-06-2002, 12:19 PM

matters what parts... trigger frame doesnt

jayknow · 09-06-2002, 03:06 PM

son of a.....I want that electro frame

Killious · 09-18-2002, 02:21 PM

The bolt pin on my 2k2 rebel extreme broke off and 1/2 is stuck but is still holding the bolt in place. Is there anyway to take out the rest of the poltpin? and if there is are there any recomendations to fixing it / replacing it??? (does CA work with that kind of metal if anyone has tried or even knows what CA is)

rubberbanned · 09-18-2002, 03:44 PM

um explain again please what is the poltpin?

Killious · 09-19-2002, 12:04 PM

haha very funny i ment to say bolt pin not poltpin

rubberbanned · 09-20-2002, 12:03 PM

if it is the little thing that connects the stack then it should come right out. If not I don't know

tunnelrat · 10-13-2002, 01:09 PM

You might try to push it out from the back.

Just use a knife or set of presision screw drivers.

-RuShPB227- · 10-13-2002, 05:50 PM

dang its been forever since ive checked this thing. lots of posts. Any help that hasnt been answered by any of these other guys?

tunnelrat · 10-15-2002, 11:36 AM

I was wondering, beeing that the Rebel is almost the same as a Diablo sabotage ( they even have the same instruction manual).

I was wondering, do you have any recommends concerning upgrades?

It plays fine now, but fine ain't good.
I mostly play woods and if i'm shootin a someone, i don't need the whole other team to hear where i am.

Also i want to explore the possabilities of switchin to Comp. air.

PLease gimme advice..

Thanx.

paintsniper007 · 10-18-2002, 10:22 AM

That looks like a sweet x-chamber, but I wonder which option I should choose for it to fit a Rebel Bottomline? Please help. I will appreciate the help.

paintsniper007 · 10-18-2002, 10:25 AM

I was wondering if the electronic gripframe for the 02 Rebels will fit my Rebel Bottomline, and how much will it be? I live in PA, so I do not know many local stores, because I am new to the game. Please help. Thanks.

jaredu · 10-19-2002, 10:45 AM

Okay....I've been trying to get the pin that holds the trigger in the frame off and it isn't budging....Which side do I tap on to make it come out? I'm going to replace the trigger springs....

Thanks