PBR's very own guide on buying a new barrel! - Page 2

\\'arriorr · 02-23-2004, 02:29 PM

mods disount any of the people that have gone OT, i dont want all this work everyone has done to goto waste. please refrain for information on flatlines and such, this is to help give a guide and some what a mini review of barrels to help decision making in buying.

thank you, but makes me sad, teuf chibi and cool get a G/J, but not little \\'arriorr.

caught my tears.......

\\'arriorr · 02-23-2004, 06:08 PM

whatever man, still thats rude, not nice at all, later, and ill delete it all btw jsut so i have nothnig to do with this thread or your post. since you have it all down already and dont care about me writing that to help you and others.

Rup · 03-14-2004, 12:59 PM

I constantly catch paintballs, in my back, sides, elbows, shoulders, etc

S*tanley · 12-08-2004, 01:14 PM

...As for the flatline controversy i have put together a 98 Flatline installation power point presentation. Pm Me and i will send you a copy.
I'm not saying you have to agree with my methods or opinions, but it is my experience that when used correctly, the flatline is no gimmick.
with the 98 flatline there is a large margin of error, much was improved with the A-5 flatline.

low margin of error= happy children

LiveLax · 01-09-2005, 01:46 PM

I have a tippy standard 8in stock barrel and i am thinking about covering up some of the porting thats towards the middle of the barrel. Is this a good idea and will it increase accuracy at higher velocity. Right now i have to set my velocity low and aim my gun a good 20 ft above target to get accuracy at a target mabye 50ft away. I play woodsball

civilization · 02-09-2005, 07:32 PM

I don't think that's the case.

BigTarget04 · 02-09-2005, 10:25 PM

Nice job on bringin back dead thread

, and covering up the porting will not do all that much for the performance of your marker.

adammc1287 · 02-18-2005, 04:41 PM

i was wondering if anyone could give me some info on the j&j full tilt ceramic. Is it significantly better than teh normal ceremic and worth the higher price tag?

I hope im putting this in the right place.

.:{}:. · 05-26-2005, 06:25 PM

The stiffi would be a nice addition to this thread, more specifically the sw!tch.

landpaintball · 06-10-2005, 01:40 PM

hey i don't know what your talking about but does anybody know if a spyder barrell will fit on a View Loader Orion If anybody knows email cause i need to get a new barrell

bunkerboydrew · 07-01-2005, 02:14 PM

You could update the Kaner to the sto kaner. Its a bit better and different from the older one. I also 2nd the adding the stiffi to this thread.

Paintball=life · 07-05-2005, 02:20 PM

Quote:

Secondly, you need to decide what type of barrel best suits your marker, a single bore or a kit. Normally, a barrel kit would be a waste for an open bolt marker, as paint-barrel match isn't as big of a deal as people make it out to be. [/b]

Y would it be a waste???? I have a TES and i was thinkin of gettin a Freak Kit

GloryShark · 07-30-2005, 07:03 PM

no ones answering the barrel questions in here in case u havent noticed....check the dates

and a lot of these barrels are old

thers a whole lot more new and improved barrells out now

TheJealous · 08-13-2005, 10:21 PM

ahahah

The_Chosen_One · 11-07-2005, 12:11 PM

should i get a teardrop or cp 2 piece? or any other for under 50$ on my omen 2.0

nspbplayer16 · 12-06-2005, 03:40 PM

Quote:

Originally Posted by reneirwolf878

AA and Freak porting are in the same pattern, a spiral.

AA porting doesn't have grooves coming out of each hole as the Freak.

The AA tends to leave squeegees intact while the Freak eats them like no one's business.

what does that mean the freak causes alot of barrel breaks

GranDream · 12-06-2005, 04:55 PM

Quote:

Originally Posted by nspbplayer16

what does that mean the freak causes alot of barrel breaks

No, I think he means the porting on the Freak pulls fibers out of swab type squeegees whereas the AA will leave them in tact.

stlstorm · 12-17-2005, 04:50 PM

can you tell me what you know about the redz peperstickz kit

buzzboy · 12-20-2005, 04:01 PM

Another barrel to ponder, what about the CCM kit. Looks good on paper but how does it perform.

ddozen5 · 01-15-2006, 05:50 PM

Quote:

Originally Posted by adammc1287

i was wondering if anyone could give me some info on the j&j full tilt ceramic. Is it significantly better than teh normal ceremic and worth the higher price tag?

I hope im putting this in the right place.

from what i heard it is worth the higher price tag im looking at one for my 98 not soo much the "self cleaning" just the fact that its supposedly more accurate than the one pieces.