Guide to Upgrading Your JT 5.0/6.0

[neo32]

Will an aka lightning bolt fit onto a 3,5?

[CapnCrunch]

Originally posted by neo32
Will an aka lightning bolt fit onto a 3,5?

This is the guide to upgrading your 5.0/6.0

Post that question in a thread, and try not to ask any q's in here....you can PM me if you want.

[Spyder88]

JT Excellerator 5.0 and 6.0 still availible at Zone Paintball

[markde]

A 3.5 or 3.5e is the same exact gun as a 5.0 or 6.0, they are just black, same but black.

[Bobsbarricades]

how do you know if you have the anti-chop bolt? what does it look like?

[JT Pimp]

The only anti-chop bolt is the new one for the new markers. The "new" bolt for the 5.0 and 6.0 are the ones with one hole instead of two, this reduces alot of the blow back. Jt will send u a new bolt for free.

[Bobsbarricades]

what if my bolt has green o-rings and 6 holes around the outside....

he also sent me a white plastic lookin bolt that has one gigantic hole in the middle and an airway that is curved sorta... hard to explain. I think its a timmy bolt, but I dont know what kind. any clues?

[gukkigun]

hello all, i am new to this board, i currently own a 6.0, want to get the thumb velocity adjuster, anyone know which one will fit on 6.0?

[Silent wolf]

JT pimp said:
The only anti-chop bolt is the new one for the new markers. The "new" bolt for the 5.0 and 6.0 are the ones with one hole instead of two, this reduces alot of the blow back. Jt will send u a new bolt for free.

how do i get one from JT?

PS: for the velocity which way increases it? I forgot

[jt boi]

hey what is a microswith and what does it do?

[5150_91]

The switch behind your trigger is a microswitch...u push it and the gun shoots.

[5150_91]

The switch behind your trigger is a microswitch...u push it and the gun shoots.

[rsprout]

dont bother you could just go and buy one it would be alot faster. ive owned a jt 5.0 for about a year and ive called jt everyday since ive had it and no one has answered. can anyone tell me if this is the right # 888-458-4327

[ChuckSplat]

could i possibly upgrade the trigger frame with the spyder tboard, and will regular 45 grips fit the accellerator 5.0

[[XNZ]37_Empire]

Yeh thats wat i had to do with mine... i mean shaving the extra flap off the feed its reel easy though... yeh...

[Dj_Decipher]

The InYoFace offset I have just wasn't enough to put the scope out of the way of the feedneck (see attached photo links). MAN, that's disheartening to see your feedneck in the way...man that sucks when you plan your setup carefully only to come across another obstacle

http://www.pbreview.com/forums/attac...1&d=1136581726

http://www.pbreview.com/forums/attac...2&d=1136581736

*sigh* but I guess it's all part of the experience.

So...my solution is getting a longer feedneck. What do you guys think?
I heard, "JT 5.0s take angel threaded feed necks". That doesn't mean I need an angel feed neck or is it referring to the thread type?
And after much looking around, I'm thinking what would be a good high-rise feedneck for my setup???

(because I sure as hell am not mounting 2 offsets, and I have to keep the InYoFace offset, lol) The hopper is actually tilted rightwards because of the scope; the bottom of the Halo grazes the scope.

All I want is a visible line of sight for the scope, and unfortunately I don't have a 6.0 that has the high-rise feed neck

And about angel threads...how the hell do you get the feedneck out?! I brought it to this half-a$$ PB shop in my town Ajax and the guy said I'd have to strip the gun to it's body and either torch the body around the neck or put it in an oven to loosen the seal on the threads. This would be the part where I look at him like "are you on crack?". I dunno but I sure as hell am not doing that to my gun nor am I taking this guy's shady advice.

This is my last upgrade I'm unsure of and I really appreciate everybody for their input and viewing.

PS: to rsprout and all inquiring about the bolt JT will send you for free...

Originally Posted by rsprout

dont bother you could just go and buy one it would be alot faster. ive owned a jt 5.0 for about a year and ive called jt everyday since ive had it and no one has answered. can anyone tell me if this is the right # 888-458-4327

No sorry I don't think that's the right number. Try this one:
1-800-755-5061 that worked perfect for me. Check out this thread for more details:
http://www.pbreview.com/forums/showt...=337937&page=4

[bubba88]

so would a Shocktech Alias Intimidator Bolt fit?

[brian57]

what upgrades do anyone recommened for a ecellerator 6.0
I have.....
-Spyder Fasta Hopper-
-Smartparts barrel
-20oz Co2
and the rest is just normal gun.........also it keeps choping so if you can hel me stop it plz do!!!!!!