HALO-B vs eVLution II (Y-Board)

[Angel4boy]

the article was done on this red chrono...but im not too sure of the name...i know that not all chronos are off.

[BourneKiller]

Originally posted by Angel4boy
No...read it in a magazine article...but then again the article could be wrong .....

So some article just said that chrono readings were off by 5-6bps? And you just believed that?



Try telling the cop that pulls you over w/ his radar gun that "it's usually off by 10-15mph, I read it in an article."

See how far you get with that.

[Angel4boy]

ok first off all the cops radars arent offf and second we are getting off of topic..

[BourneKiller]

Originally posted by Angel4boy
ok first off all the cops radars arent offf and second we are getting off of topic..

It's the same device, btw.

Yes, I know, the Chrono radars aren't off either.

[TheMasterChief]

um I'm not sure if this has been mentioned but you missed one con on the halo b if paint breakes inside of it it will most likely cover the eye preventing the fopper from working

[BourneKiller]

Originally posted by TheMasterChief
um I'm not sure if this has been mentioned but you missed one con on the halo b if paint breakes inside of it it will most likely cover the eye preventing the fopper from working

Paint breakage in any hopper pretty much jacks you up.

[chibissj]

I've never had one ball break in my halo just jams that I can clear out with my rip drive.

[WGPrules]

sorry if you disagree but i have too go with HALO B all the way there is no challenge

[chibissj]

Originally posted by WGPrules
sorry if you disagree but i have too go with HALO B all the way there is no challenge

care to back that up any?

[rawrness]

Feedneck is intentionally designed too large, so before you play, you must spend time sanding down the feedneck to fit your feedtube. I suggest using a dremel tool, sandpaper takes far too long.

is there any way to avoid this? im gonna get an 05 angel speed with a halo b and im not too fond of taking a power tool to my brand new halo...anybody know if the speed can take a halo out of the box without sanding it or am i gonna need to get some kinda adjustable feed neck clamp?

[Angel4boy]

If your gettin an angel speed 05' you dont have to sand it down...it comes with o-rings that go into the feedneck (come in different sizes) to fit every hopper.

[rawrness]

thanks for the info that helps alot

[Angel4boy]

No prob.....

[nolanation4]

if you get an eggy it might be fine or it might break right away thats usually how it goes

[colin187]

how often do u really shoot over 15bps when ur not showin off

[Angel4boy]

Keep it on topic. I'm tired of your unrelated garbage.


-Bourne

[Phat Phill]

What a nice and polite fourm. Where do Reloder B's fit into this beautiful debate about hoppers. Just Wondering


P.S. Angels Rock!!!

[lri2x98]

Originally posted by Phat Phill
What a nice and polite fourm. Where do Reloder B's fit into this beautiful debate about hoppers. Just Wondering


P.S. Angels Rock!!!

shut the hell up phillip. before u say anything just shut up

[Phat Phill]

Spency common be nice im sure ur. just rocking that e2 check out my post on the how fast you shoot e2 thread

[tritonwall]

the funny part is, i have read this whole fourm and still dont know which hopper to get