BKO life or death question

BunkerBuddy_666 · 01-30-2008, 11:46 AM

So, im a moron and destroyed my BKO... Basically the story goes, about 2 years ago I was playing some Sup' Air at the field with my buddies and my electronics just crapped out. Opened her up, changed battery, checked connections, board was fine. Now, i can't remember if the led was blinking but the solenoid wasnt clicking, or if neither of them weren't worknig at all. But thats not the main problem. The problem is that I got so frusterated with it that i tore out every wire, took the LED, switch, solenoid and board out, put it all in a bag to collect dust for two years. Just today I decided to reassemble it, but cannot figure out what wires connect to what. It's a 2004 Unmilled BKO, and SP did a nice derlin piston mod to it ahwile back so i dont really wanna toss it out. All i need is a diagram or schematic telling me where to connect the 3 blue, 2 yellow, and 1 red wire from the wiring harness, keeping in mind i need to connect the switch, LED, and solenoid. Even a pic of someone elses wiring harness would help.
Thanks a bunch guys

iliveforthis99 · 01-30-2008, 11:54 AM

Will these help? Wiring Diagrams

BunkerBuddy_666 · 01-30-2008, 11:59 AM

ah yes, this is exactly what i was looking for. Thank you very much. Once I get it all back together I'll see if it works... If not I'm breaking the bank for a Timmy or Angel lol.

iliveforthis99 · 01-30-2008, 12:02 PM

No problem, hope it works out.

BunkerBuddy_666 · 01-30-2008, 12:36 PM

on/off switch works
triger switch works
cuircuit board seems to be working
LED wont turn on unless i connect it to the wire that connects to the trigger switch, but if i do that it will work properly
solenoid will not click at all

... any suggestions?

EDIT: Got the LED working as it should according to the diagram... only problem now is the solenoid...