Official ICD B/S/T Thread: Read Rules Before Posting!

[MatrixBaller04]

I have a Blue 2004 Extreme Milled BKO for trade for a higher end gun. I will Include:

Blue Matching 16" 'Cocker Threaded Dye Ultralite
Black 12v Revvy w/X-Board
Black 14" Spyder Threaded 32 Degrees Whisper Barrel
Black/Blue Severe Paintball Jersey
Black/Gray Dye Barrel Condom
Autographed Drawing Of Gator Glaze
Red Extreme Rage 68cu Tank Cover

Someone PLEASE post an offer for a higher end electronic gun. I would really like an Ebladed Autococker. Year of gun doesnt matter as long as the gun shoots great.

I can only talk on here Monday-Friday 10:30-11:30 A.M. because I am grounded from the comp at home and I have to use the school comp.

Please PM me with any offers you may have.

Pictures upon request.

I DO NOT want to sell this gun. ONLY trade!!

Thanks
-Matt

[RaGeD P1NGA]

http://www.pbgeek.com/rage/microswitch%20&%20qd.JPG

This is a 25g microswitch upgrade from the stock heavier 80g microswitch..This microswitch can improve you ROF by the lightend switch.

Also a quick disconnect which allows easier maintence...this will disconnect the noid wires so you can take the body and grip frame apart for w/e you want to do

Heat shrink is included to keep the soldered points sercurely in and protect from future harm to the soldered point

I'd like $6.50 shipped paypal for this...I can also take MO's and cash

[Kissane720]

14in ICD thread Dye Excel first 10$ offer gets it AIM: kissane720

[yoda101]

WTB: 2k3+ Trigger frame, need to get my baby up and running

[sbc785]

the setup in my sig is for sale, except for the halob and the tank....gimme a pm if u want anything.

[SABO]

Well, as much as I have liked both of these markers, my heart is still set on a freestyle. Thus, these two must go.

Marker #1 - Purple b2k, fishbone milling, PDS, LCD, Chaos chip, and vapor internals (valve, wiring harness, and vaporized), and a few other ups - 325.00 - Check with some at LCP who have seen this marker in action, no chps at all with the pds and with the chaos you have the best electronics made. Uber fast.

(Deal Pending) Marker #2 - Gun-metal gray dye reflex autococker with the racegun frame. MARKER IS GONE

If interested in either marker please pm me or email me for more details.

ONLY trade considered would be a 2 for 1 for a Freestyle and if it has 05 internals then I will add a little, if it is an nd I'll add considerably

If seriously interested please e-mail me for pics and more details

thanks for looking

[bluesboyk3]

Well, got some misc items for sale. will sell cheap cuz i got no use for them

1. 2k Bushmaster frame, some wear: Maybe $25 shipped w/ Dye sticky, 20 shipped without sticky, still got punch pins
2. Dye sticky : 8 shipped
3. OTB grips red and blue : might fit angels frame $10 shipped each


This is what they look like on the gun - JUST FOR ILLUSTRATION


Next up is for misc stock bushy parts
Stock bushy valve : 15 + ship
stock lpr plunger : 5 + ship
Stock 12 in barrel : 10 shipped



ALL PRICES ARE NEGOTIABLE, just pm me or talk to me on aim: rogueriderk3

Thx, looking forward to get rid of these sutff lying around

.Okay also got some misc parts:

1. green nipple protector. great for protecting against dirt or debris. : $6 shipped.
2. Assorted air fittings - one 90* for ss hose, one 90*for macro and one staright for macro - i think : 5 shipped each or 10 bux shipped for all 3
3. 3 o-rings - $1.50 shipped.
4. System X 3 way - with 4 rods that's supposed to be connected to the trigger arm. I dunno if this thing still work. missing one barb. U can take it to ur airsmith to get a barb.
If this thing leaks, just call System X and i think they'll replace it for free. Like i said, i dunno if this still work, sold my cocker long time ago. $ 12 shipped for the 3 way and the 4 rods

$22 BUX FOR ALL SHIPPED.

[Bayt]

Howdee folks:

Gold B2k2 X-Milled
CP 12'' chrome one piece
CP Black Shorty Reg(brand new)
macdev red valve
vapor bolt
Off the Break Vert Frame(minor scratch covered by grips)
9300 Board*
Check it Products unimount(missing one securing screw)
PDS*
Vaporized

*= Recieving from Darryl soon.

I can have him ship the marker straight to your door when he finishes the work.
Feedback: http://www.pbnation.com/showthread.p...22#post7987922

Price: 550 shipped with insurance.

Pics: I have old pics of it without the cp reg, unimount, and frame. I can take pics of the frame and everything if you would like. Just leave your email or catch me on aim with what you want pics of.
AIM: M0D101
This is a pretty fair offer.


Thanks guys.

[slipknoTikp8bal]

04 BKO 4/S/T

i have a pretty much stock 04 bko w/ a long cp reg. i just found a good deal on a speed so i will most likely sell this.

price is $265negotiable

bought for $295, cp reg was $80

pretty good condition minor dings by the back tray screws but thats about it. minor wear on the lpr adjustment area but still very usable.

EGGY DROP and MACRO not included.

Will add tank for total price of $290. Tank is a Crossfire 47/3000psi. Great condition. Cover included. Red Dye.

only about 1500 rounds through this baby, shoots great, only problem had was with stock reg but thats gone now.

[Kowz_76]

Alright folks,

I have a Mint condition 04 BKO. It's stock, with a shocktech drop and CP on/off. The gun has seen 1 day at the field, and has been babied both on and off the field. This gun has no serious scratches on it, and works really well.

I'd like to get about $240 shipped for it, but make an offer, and I'll see what I can do. I might also take trades, so offer away.




AIM: kowz76 atpbr
PM me or post here

[greenshoes3]

if anyone has an oringed bolt, pm me

[Grubby]

F/S F/T

Parts:
-ICD-
AKA SCMII - Never aired up, brand new $70
Sonic LPR - Polished, Milled Adj. Slot
$40
MacDev ASA - High-Flow nut, Gauge
$15
Angel Minireg - Blue, LP shim mod
$35
ICD Wiring Harness - 25mg Switch, White LED
$15
Chaos 2K4 Board
$65
OTB Vert Frame - Black, Internal weight milling, Angel GelGrips White
$100
JJ Edge Kit-
$60
14" Blue Tip/Chrome Backs ICD
14" Black Tip/Black Backs Cocker
Bullet Drop with ASA
$15
Lady Drop
$10
Stock:
Valve/Cupseal $15
Bolt/Pin $10
LCD Board $15
XMill Body/Feedneck (prolly wont hold air, but good for attempting milling patterns) $25
Noid Block/Manifold $10
Or all "Stock" Parts for $50

Zenitram Venom Bushmaster
Contour milled body
Polished Bore
Zenitram 15 degree ASA
Zenitram high flow valve
Zenitram bolt
Zenitram 45 Grip
Dye sticky grips
Micro rock reg. with custom hoseless adapter
TechPro Board (like Chaos)
Larger high pressure chamber
PDS Standard
Autococker Threads
BLACK



note Zeni comes with DYE gauge and no Empire Bracket
$600

More Pics coming...
PM grubby
AIM jgrubs689
email jgrubman@bates.edu

for trading i am specifically interested in FREESTYLES

[bushy13]

I have a 14 in ICD threaded boomstick for sale. I would like to sell for $50, make an offer if your interested. Pm me if you are interested.

jason

[nbaryo]

all black icd b2k3 otb bushy for sale
ive got a b2k3 i dont need anymore so it up for sale
its got an otb frame and a shoot paint wiring harness i also have a cp barrel i can add

price 375
400 with cp barrel
price not set in stone make me a reasonable offer
also i have feedback in pbnation
my feedback
http://www.pbnation.com/showthread....threadid=632940
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[bushy13]

i have a

2k4 bushy
black to red fade
PDS
cocker threads
comes with a stock freestyle barrel
the gun is stock.

I will sell for $315 shipped.

I also have a 2k4 chaos board I will sell for $50 shipped. If you want the gun and board I will sell both for $350 shipped. Pm me if your interested.

jason

[bluesboyk3]

not FS anymore

[Flakey Lemon]

http://www.pbnation.com/showthread.p...hreadid=893108

$230 only been used once

[hvydrop]

I have a WAS board (not sure what verison) and harness w/ PDS for trade. WAS board is out of my '04 bonebrake bushy, works great and board and harness/pds are in excellent condition. Looking to trade both for etheir like a Stunna/or other upgraded harness + cash, or stunna harness + whatever else you'd like to offer. Pics available soon.

[bunker 'em]

Bob Long Defiant, b2k3 mag modded frame, evil death grip grips, acid customs scythe trigger, chaos chip, 15* asa, palmers stab, dye mini gauge, dye UL barrel, a plus feedneck, custom milled


http://imagehost.bizhat.com/uploads/f32a9d9168.jpg

lookin for 400 OBO or trade for a classic timmy with clamshell(really want) or anything else except tippys and clones

AIM-MrBrightside624
or pm

[bunker 'em]

also has a brand new wiring harness and all new seals