Vision install Question

[ImGameFace04]

I just bought a 04 Imp Game Face (non vision). I purchased the vision upgrade for the gun and was wondering if it is something i could do myself or do I have to take it to be professionally installed. I thought I heard or read somewhere that you have to drill a little to make the eye fit???

[rcxpaintball]

you can do it yourself if you want it doesnt require much just a small file or a dremel (forgive my spelling) and all you have to do is remove a small piece of metal (burr). Heres the instructions on installing the eye for the WAS board its quite similar
http://www.wickedairsportz.net/manu...stallmanual.doc

or if you want im PIT certified....I can install it for you. But its a fairly easy installation to do yourself.

[toothpastedog]

Originally posted by rcxpaintball
you can do it yourself if you want it doesnt require much just a small file or a dremel (forgive my spelling) and all you have to do is remove a small piece of metal (burr). Heres the instructions on installing the eye for the WAS board its quite similar
http://www.wickedairsportz.net/manu...stallmanual.doc

or if you want im PIT certified....I can install it for you. But its a fairly easy installation to do yourself.

umm, he's not installing WAS is he? for vision, you don't need any tools except some allen wrenches and a small philips head screw driver. any one can install vision-just remeber to unscrew the micro switch activation screw all the way first, or else you could bend/break the switch.

[pEnNyWiSdOm225]

As long as an Impulse is Vision Ready(which yours is), Vision should be no problem at all to install.