Trilogy Facts

[Loncove]

just ordered from compulsivepaintball.com, autocockhq.com diddnt have the nexus ram in stock.

[detroitpb]

wicked sweet man.
get some pics when you get it put together and if you get the frame from planeteclipse its cheap and they give you a bracket
let me know how it preforms and dark master i know this is a pain but could you list the parts i need to get in order with a link please?

[Dark Master]

Parts off...? My memory isn't that great.

[detroitpb]

to put the blade on

and the grips you got say they wont fit an eblade

[Dark Master]

Just post what you want me to do. I can't remember/find what you were talking about. Not like I have anything better to do right now other then get ready for tomorrow.

[detroitpb]

if you could please post in order with links the parts i need to setup the eblade

[Dark Master]

Well, to just setup a eblade, you would, of course, need a eblade, as well as a mounting bracket to mount the noid.

To really achieve a high ROF you would need a fast ram w/qevs (Nexus), ;ight pump arm (CCM), light back block (Slik), light bolt (Slik), spring kit (maddman) to reduce kick; lower lpr pressure; and increase efficiency, lpr nut thing to mount a new lpr, and a new lpr so you can lower the cocking pressure.

[Loncove]

dark, i will soon have that setup.... probably next i have money i will the most bad *** trilogy out there haha. when i get the ram and qev's i will definitely ask you for some help if i need it.
btw.... will i see an improvement in my gun after i put that new nexus ram on there?

[Dark Master]

It will feel smoother, but if you won't notice much without a adjustable lpr and a eblade.

If you need any help with installing the parts, PM me.

[detroitpb]

i might play again thursday but ill have a 68/4500 and be using my revolution

[Loncove]

own ppl with your trilogy. i'll make sure i'll post pics of my pro after i intall the ram and more pics after i upgrade a part. next upgrade will be new lpr. probably the palmers mini rock designed for the trilogy, so i wont have to buy that adapter. then i would probably by this kit http://www.compulsivepaintball.com/I...=10650&eq=&Tp= if its fits, and then the pump arm http://www.compulsivepaintball.com/I...10447&eq=&Tp=, after i do all of that than the e2 blade is coming on. hopefully all goes well. i dont plan to get a barrel anytime soon because i think the 3 barrel kit that came with the pro will do fine for now.

[Loncove]

i just realized that the rhino regulator is not the regulator you hold on too (unless im still mistaken). Its the regulator near the ram....right?

since i know the difference now... would it be a good idea to upgrade the inline regulator after i put a new lpr.

[Virus_Nyne]

The LPR is the regulator next to the ram, and is the regulator Dark and I have been talking about. Upgrading your inline wouldn't be a bad idea, but for right now I wouldn't worry about it.

[Loncove]

thanks guys for the help. im still learning about about all the parts on the cocker... so if i mess up, plz correct me.

ps. does that mean i can put any inline reg on my cocker?? without an adapter?

[Dark Master]

Inline reg, yes. LPR, no. You need a adaptor for that.

[Loncove]

just to let you guys know that i am stoked about all the upgrades im going to put on this marker. can not wait to put that ram and after that the lpr and the slik autococker lite kit. hopefully my gun will perform great before i even put the eblade. im sure it will though ha

[detroitpb]

yea try to get a video together

[detroitpb]

hey can someone show me how to dissasemble the pro, i need to get the trigger off so i have more leverage on the screw in the gaurd.
i like taking things apart and putting em back together

[Loncove]

any certain way to take this off?

[Dark Master]

Take out pull pin, bolt, cocking rod. Unscrew back block from pump arm. Then unscrew pump arm from ram shaft.