Settings thread

[bl_leurck]

thanks

[TStorm]

hey does anybody have any good settings for a virtue board???
thanx

[cooldrmoney21]

Frenzy Board

Dwell - 6.0
BIP - 0.0
Mbounce - 05
CompMode - Semi
PSP/CAP - Npsp/Ncap
Eye mode - Force
BPS Cap - 18
Delay - 0
Debounce - 2.0
Ramp bps - 8

I think I got all those settings in and correct, I know that they are not in order, but thats what I use. If I am playing with buddys at our own field, then I use full auto or smart ramp. But at other fields they usually ask for semi auto settings, they usually never ask me to set a bps cap. These settings allow me to let the paint pile up on top of each other like you wouldnt beileve.

[James_Haun]

I have an old equalizer board coming in the timmy I just bought. What in god's name are the settings for that thing, thanks.

[AkrYliK808]

Anyone got Virtue settings? I dont want to use the default settings.

THAnks

[2tw!steD]

Frenzy (not sure which version, gun isn't mine yet)

Dwell 5.0 mS
BIP 0.7 mS
Bolt 15 mS
Delay 00
Deb 2
MBNCE 00

The gun seems to be just fine. It's capped at 15 with ramping on. Every now and then it bounces, but that's mainly my fingers being used to the pull on my shocker. The gun is experiencing some odd fluctuations in velocity. Example: I shot it today (after setting the LPR to 75 psi). It shot 290, 283, 297, 292,264, and then 290 three times in a row...I just didn't understand the 264 that it had. Any help would be appreciated.

[VANILLA_GORILLA]

what are the best settings for a 127.5 frenzy board, I am running at 11 bps at the moment...gotta get it fixed.

[c_rone]

Search the post, im sure its already listed.

[TStorm]

Advantage PB Virtue Board

Debounce: 3
Dwell: 10
Eye Sensitivity: 1
AMB: 2
ABS: 1
Max ROF: Unlimited

i use these settings and my timmy is pretty fast

[c_rone]

ok i need some advice. i have an Empire II and cant seem to get rid of the bounce with my trigger set up how i like it. in order to get rid of the bounce i have to make my trigger spring very stiff. i am not really sure what all the different settings will do and dont want to mess up my stock set up too bad. so any advice on what to do? Oh my trigger system is all stock. And my current set- up is as follows:

Empire II
dwel 8.0
eye mode forced
bip 0.5
cap bps 18
deb 12.0
mbnce 02
Semi

[Gundam]

For Frenzy 116, 127.4, 127.5, 127.8 boards. (Rendition Tech Settings)

Ball in Place / BIP : 2ms
Dwell: 9ms
Bolt Forward/Bolt Delay: 15ms
Eye Mode: Force Mode
Mbounce: 1
Debounce: 4
LPR Pressure (guage): 80psi

[Tweeter]

Classic timmy
Frenzy 1.10
Dwell: 16.0
Eyes: Delay
BIP: 1.0
Dolt delay: 10
Debounce: 2.2
LPR: c 80

[ChrisnAustin]

Originally Posted by SouthernStyle

Virtue Borad $160.00

Setting the Dipswitches

Dipswitch 1 is for the max rate of fire/15bps cap lock. Dipswitch one in the on postion, your max rate of fire is set to your "Max rate of fire" Setting (Flickering Red LED in program mode) If Dipswitch 1 is in the off position, the max rate of fire of ALL modes is capped at 15bps. After changing this setting, your must turn your marker off before it takes effect.

Note that the actual bps will vary slightly from gun to gun. If the desire bps is too high or too low with dipswitch 1 off, then leave dipswitch 1 in the off posstion, and adjust the max rate of fire through the programming menu.

Dipswitch 2 is the Tournament Lock. To Access the programming mode of the Virtue 2k4/5 Intimidator Borad, Dipswitch 2 must be in the on posstion. The hold down the trigger and turn the marker on to enter the programming mode. When the Dipswitch 2 in in the off position, the gun is in "Tournament Lock", and program settings cannot be changed.

LED Indicator
Solid Yellow (Durring startup) Indicates a Low Battery
Solid Blue Ball in Breach; Gun is ready to fire
Solid Red No Ball in Breach
Flashing Red Eyes disabled
Flashing Blue Eye malfunction

Program Mode
To access the program mode of the Virtue 2k4/5 Intimidator Borad, Dipswitch 2 must be in the on position. When Dipswitch 2 is in the off position, the gun is in "Tournament Lock", and program settings cannot be changed.

With Dipswitch 2 in the on position, HOLD the trigger and turn the marker ON. The LED will then cycle through a rainbow of colors and stop on purple, indicating that you are now in program mode.

Tapping the trigger will then toggle though the different program modes:
Purple: Firing Mode
Green: Debounce
Blue: Ramp Activation Speed
White: Ramp Precentage
Red: Dwell
Teal: Eye Sensitivity
Yellow: AMB (Anti-Mechanical Bounce)
Flickering Green: ABS (Anti- Bolt Stick)
Flickering Red: Max Rate Of Fire

Change the Value of the Settings
When the LED is lit for the DESIRED setting, pull and hold the trigger untill the LED begins to flash. The LED will flash the number of times the current value is set to. When the LED stops flashing YOU THEN HAVE 2 SECONDS to enter in
the new value by tapping the trigger the amount of times you want the new value to be set to.

After you have set the new value, the LED will flash back at you the number of times you have just entered, and then flash through the rainbow of colors, returning to the color you have just adjusted, indicating that the new value has been set. To exit programming mode, shut the marker off.

Program Example
If you want to change the debounce to 2 you would:

1. With the marker off, and Dipswitch 2 in the on position, hold the trigger and turn the marker on.

2. The LED will now cycle through a rainbow of colors and stop on purple.

3. Tap the trigger once so that the LED glows green.

4. Pull and hold the trigger untill the LED starts to flash (factory default for debounce is 5, so the LED will flash 5 times).

5. When the LED stops flashing, quickly tap the trigger 2 times.

6. The LED will now flash 2 times, and then flash through the rainbow of colors, and stop on green indicating the new value has been set.

7. To exit programming mode. Turn the marker off.

Return to Factory Default settings
To turn all settings back to factory settings. In programming mode. Hold the Trigger down for 10 seconds untill the LED turns white. Then it will cycle threw the rainbow of colors. Then its back in factory settings.

Firing modes/Adjustable settings/Ramping/Values
Firing Mode (Purple) Value 1-7 (Default is 1)

1. Semi Auto

2. PSP Ramp Mode - First Three shots Semi Auto. After 4th shot marker will ramp to your "Max Rate of Fire" is set to. Once the trigger is let go and 1 second elapses, 3 shot semi auto count restarts.

3. NXL Style Full Auto - Frist 3 shots in Semi Auto. After 4th shot hold the trigger down, and marker will shoot full auto at your max rate of fire.

4. Ramp Mode - When you reach the "Ramp Activation Speed" the Marker will ramp the rate of fire by your "Ramp Precentage" setting, up to your Max Rate of Fire. Factory default is when yout trigger speed reaches 5 bps, the marker will ramp up to the maximum speed that your loader will feed.

5. Auto Response - 1 Shot on the pull of the trigger; 1 shot on the release. This setting will make you shoot twice as fast as you can pull the trigger.

6. Full Auto - Hold the trigger down let it rip.

7. Breakout Mode - In this mode, when you turn the gun on, the first shot will shoot full auto for as long as you hold down the trigger. Once you release the trigger the gun goes into "Ramp Mode". If you turn your marker off and back on when in this mode, the Breakout mode will repeat.

Debounce (Green) Values 1-50 (Default is 5)
Ramp Activation Speed (Blue) Values 5-15 (Default is 5)
Ramp Percentage (White) Values 1-21 (Default 1) 1=10% - 21=200%
Dwell (Red) Values 5-30 (Default is 10)
Eye Sensitivity (Teal) Values 1-50 (Default is 5)
AMB (Yellow) Values 1-10 (Default is 3)
ABS (Flickering Green) Values 1-20 (Default is 1)
Max Rate of Fire (Flickering Red) Values 1-25 (Default 1) 1= Unlimited BPS -25= 25.00 BPS

I Have a Alias and I have the settings of the Virtue board at the factory default level and the Max rate of fire set at 23 for Ramping.
I am using a Halo w/V35 board set at 26 ball feed rate. I chopped some evils and am still trying to figure out why? it was a cold day - like 40's low 50's. When I was on the field it seemed to chop more, then I cleaned it and went ot the chrono station and it would fire off a full hopper at 23 bps then when it came to the last few balls I would slow down then stop then fire the last balll and it would chop the last ball. The chrono was reading below 300 for most shots.
Should up the Dwell or eye sensitivty?

[4THDEGREE]

Using brittle shell paint in very cold weather using results in a blender. Run a lower hopper setting and use winter fill paint. Increasing your dwell will help as well.

[^_^]

Is there anything I should change in my settings? I have a M3 Tadao board in my 2k5 Alias timmy (look in sig for ups).

[^_^]

What should I set my loader delay at for a egg 2?

[Lopez17]

Try 4 or 5.

[^_^]

I have it on 1 and i'm not chopping.. so should I still make it higher?

p.s. it has the three impeller mod on it too

[Dartheo]

I was gonna try out the setting you guys put for the Frenzy 127.4 but for my debounce, I cant get 12, once it hits 10 and over it's goes in incriments of 5??

edit: nvm, it's the 127.5 board

[impulse0509]

settings for a gz timmy with was 2.9?