|
regulator troubles...
for some reason my pps stablizer will not adjust the pressure it stays at 1000 psi no matter how far in or out I turn the adjusting screw. All the orings are good and its lubed, I just took it apart when it quit. I know the guage is good because I tried it on another reg and it only read 300 psi. I am also using the same tank so I know thats not the problem.
UPDATE: installed new hp kit and it works like a charm now.
Last edited by Ironman289 : 04-16-2010 at 09:53 PM.
|
Linear Mode
