pbReview.com - Paintball Reviews and Paintball Fields

  Join pbReview.com  |  Log In  
pbReview.com - Paintball Reviews and Paintball Fields

Search:

  
Home     |     Paintball Articles     |     Paintball Videos     |     Paintball Gear     |     Paintball Fields     |     Paintball Stores     |     Hot Deals     |     Paintball Forums     |     Chat
Go Back   Paintball Forums > Specific Marker Forums > Worr Game Products


Reply
 
Thread Tools Display Modes
Old 04-10-2006, 01:51 PM   #21
Uziel Gal
Legend
 
Join Date: Mar 2003
Location: Chingford, London, UK
OK, cocking reliability is another problem with multiple causes: -

1. Lowering the hammer lug is one thing that can resolve this problem.
2. If your hammer has a round or conical tipped lug, try a flat tipped lug instead.
3. If you sear spring is too light, it won't hold the hammer reliably - fit a longer or stiffer sear spring, or reduce the hammer spring tension.
4. If the sear or the hammer lug is heavily worn, they may need replacing.
5. If the hammer spring tension is too high, the sear may not be able to hold the hammer - reduce the hammer spring tension, or increase the sear spring tension to compensate.
6. You may need to increase your LPR pressure to ensure that the hammer is always pulled far enough past the sear.
7. If the cocking rod is set a little too long, this may again stop the hammer being pulled far enough past the sear.
8. It can also be down to slow regulator re-charge rates causing the LPR to lose pressure.
9. The simplest one - make sure that your cocking rod is always done up tight! If it is loose, the hammer wont be pulled back far enough for the sear to catch the lug every time. I have put this at the end of the list, but check this first!

You have a situation where it would appear that you need to lower your hammer lug in order to increase cocking reliability, but you have had to raise your hammer lug in order for your marker to clear the sear. It suggests that you may have your trigger pull set too short.

However, this problem may also be down to your light trigger pull, as too light a sear spring would not give the sear the ability to catch the hammer.
__________________
It's just like a battle zone, you got a bottle and you're on your own.
Gotta be a Scotch or a Kamikaze, none of those other weapons will faze me.

Hundred, hundred, hundred bottles on the wall, you wonder if you can drink them all.
Got to go home by 1am, the bottle wins the battle again.
Husker Du - "First of the last calls"
Back when I was popular
Supporting a friend:
HustlePaintball.com for Spyder paintball guns, Dye Markers, WDP Angel 1 and of course the Hustle Hotties.
Uziel Gal is offline   Reply With Quote
Old 04-10-2006, 03:07 PM   #22
CommanderMick
Registered User
 
Join Date: Feb 2006
Thanks, im gonna try to make the settings back the way they were before i messed it up. I think your right i might jsut be making the trigger pull too light for the 3 way to handle and it messes everthing up. Thanks alot, i understand a lot more and i will look back at this if i have mroe problems like this in the future, your an awesome tech. Also how do you remove the circlip on the bottom of the regulator anways. Thanks alot

Last edited by CommanderMick : 04-10-2006 at 03:14 PM.
CommanderMick is offline   Reply With Quote
Old 04-10-2006, 03:16 PM   #23
Uziel Gal
Legend
 
Join Date: Mar 2003
Location: Chingford, London, UK
I use a pair of circlip pliers - needle nose pliers will do at a pinch.
__________________
It's just like a battle zone, you got a bottle and you're on your own.
Gotta be a Scotch or a Kamikaze, none of those other weapons will faze me.

Hundred, hundred, hundred bottles on the wall, you wonder if you can drink them all.
Got to go home by 1am, the bottle wins the battle again.
Husker Du - "First of the last calls"
Back when I was popular
Supporting a friend:
HustlePaintball.com for Spyder paintball guns, Dye Markers, WDP Angel 1 and of course the Hustle Hotties.
Uziel Gal is offline   Reply With Quote
Old 04-30-2006, 01:33 PM   #24
SouthPark
Banned
 
SouthPark's Avatar
 
Join Date: Jan 2006
Location: NY
WOW. I am thinking about getting an autococker. Do i really need to do all that to clean it? How often should an autococker be cleaned?
SouthPark is offline   Reply With Quote
Old 04-30-2006, 01:37 PM   #25
Dark Master
Registered User
 
Dark Master's Avatar
 
Join Date: Sep 2003
Location: Pk, NY
No. Just a drop or two of oil in the VA every once and awhile and dry fire with the barrel off and a rag covering the breech will help get the oil around the internals.
__________________
Dark Master is offline   Reply With Quote
Old 05-30-2006, 12:36 AM   #26
crazee
Registered User
 
crazee's Avatar
 
Join Date: Sep 2005
Location: umeε, sweden
This question might sound stupid, but how do you remove the b/line (or I think its called torped in the manual) on a Black Magic?
crazee is offline   Reply With Quote
Old 05-30-2006, 10:11 AM   #27
Uziel Gal
Legend
 
Join Date: Mar 2003
Location: Chingford, London, UK
Check to see if there is a screw at the tip of the rail on the bottom of the grip. If there is, loosen the screw, and you should them be able to slide off the ASA.
__________________
It's just like a battle zone, you got a bottle and you're on your own.
Gotta be a Scotch or a Kamikaze, none of those other weapons will faze me.

Hundred, hundred, hundred bottles on the wall, you wonder if you can drink them all.
Got to go home by 1am, the bottle wins the battle again.
Husker Du - "First of the last calls"
Back when I was popular
Supporting a friend:
HustlePaintball.com for Spyder paintball guns, Dye Markers, WDP Angel 1 and of course the Hustle Hotties.
Uziel Gal is offline   Reply With Quote
Old 05-30-2006, 10:05 PM   #28
crazee
Registered User
 
crazee's Avatar
 
Join Date: Sep 2005
Location: umeε, sweden
Talk about completely lost I did trye the screw inside the frame, but I used a metric tool instead of inch, so it didn΄t connect. But now the problem is solved. Thanks for the reply.
crazee is offline   Reply With Quote
Old 07-01-2006, 01:30 PM   #29
fumpelumpakis
Registered User
 
Join Date: Mar 2005
Send a message via AIM to fumpelumpakis
my cocking rod wont come out. The knob on the rod comes out and the rod doesnt move. How can i remove the cocking rod?
Please help
fumpelumpakis is offline   Reply With Quote
Old 07-01-2006, 01:35 PM   #30
Dark Master
Registered User
 
Dark Master's Avatar
 
Join Date: Sep 2003
Location: Pk, NY
Get 2 10/32 nuts. Thread both on. Get a wrench and unscrew the one closer to the body. The outside one will keep it from moving and it will unscrew.
__________________
Dark Master is offline   Reply With Quote
Old 07-01-2006, 01:53 PM   #31
fumpelumpakis
Registered User
 
Join Date: Mar 2005
Send a message via AIM to fumpelumpakis
alrite thanks man
fumpelumpakis is offline   Reply With Quote
Old 07-18-2006, 12:51 PM   #32
Stan the HitMan
Owner of: HitmanPaintball
 
Stan the HitMan's Avatar
 
Join Date: Feb 2003
Location: I'm from...Canada? When did that happen!?
Send a message via MSN to Stan the HitMan
we should get something up here on Eblade E-way's.
__________________
My Youtube Channel: www.youtube.com/user/HitmanPaintball
Stan the HitMan is offline   Reply With Quote
Old 07-18-2006, 01:26 PM   #33
Dark Master
Registered User
 
Dark Master's Avatar
 
Join Date: Sep 2003
Location: Pk, NY
You mean the solenoid?

http://www.pbnation.com/showthread.php?t=765190
__________________
Dark Master is offline   Reply With Quote
Old 07-18-2006, 02:04 PM   #34
Uziel Gal
Legend
 
Join Date: Mar 2003
Location: Chingford, London, UK
Solenoid maintenance is also detailed in the E2 manual, and later editions of the E1 manual.
__________________
It's just like a battle zone, you got a bottle and you're on your own.
Gotta be a Scotch or a Kamikaze, none of those other weapons will faze me.

Hundred, hundred, hundred bottles on the wall, you wonder if you can drink them all.
Got to go home by 1am, the bottle wins the battle again.
Husker Du - "First of the last calls"
Back when I was popular
Supporting a friend:
HustlePaintball.com for Spyder paintball guns, Dye Markers, WDP Angel 1 and of course the Hustle Hotties.
Uziel Gal is offline   Reply With Quote
Old 08-21-2006, 10:21 PM   #35
Cocker22
Banned.
 
Cocker22's Avatar
 
Join Date: Mar 2006
Location: Ohio
Send a message via AIM to Cocker22
good thread used many a time for recomending to friends on the taking apart of their autococker. thanx dark
Cocker22 is offline   Reply With Quote
Old 08-24-2006, 08:20 PM   #36
Sargent111
Registered User
 
Join Date: Apr 2006
hi,
when safety is turned on, touching the trigger i am still able to take one more shot. and after, it lets air run if pressing the trigger any help to try and solve this problem?
Sargent111 is offline   Reply With Quote
Old 08-24-2006, 11:04 PM   #37
Uziel Gal
Legend
 
Join Date: Mar 2003
Location: Chingford, London, UK
Either the firing point in your trigger pull is too close to the beginning of the pull, or your safety catch is allowing the trigger to move too far before it locks it up. As the 3-way (I'm assuming that this is the source of your leak) is moving far enough to leak, I would assume that you are able to pull the trigger some distance before it locks up.

Unfortunately, without more info (what frame you have, any modifications made to it etc.) I cannot really advise you as to what you can do to resolve the problem.
__________________
It's just like a battle zone, you got a bottle and you're on your own.
Gotta be a Scotch or a Kamikaze, none of those other weapons will faze me.

Hundred, hundred, hundred bottles on the wall, you wonder if you can drink them all.
Got to go home by 1am, the bottle wins the battle again.
Husker Du - "First of the last calls"
Back when I was popular
Supporting a friend:
HustlePaintball.com for Spyder paintball guns, Dye Markers, WDP Angel 1 and of course the Hustle Hotties.
Uziel Gal is offline   Reply With Quote
Old 08-25-2006, 05:00 PM   #38
Sargent111
Registered User
 
Join Date: Apr 2006
i have a 04 vf stock gun. on the bottom of the trigger with no safety the pull is 1cm. with the safety on, i can move the trigger approx 2mm. yes the leak is at the end of the 3 way. as well if i pull the cocking rod back manualy and press the trigger it does reliece it. ask if u need more info.

thanks for the help
Sargent111 is offline   Reply With Quote
Old 08-25-2006, 05:18 PM   #39
Uziel Gal
Legend
 
Join Date: Mar 2003
Location: Chingford, London, UK
Sounds like you have both the firing point and cocking point too close to the beginning of the trigger pull. If you want the safety to be functional, you'll need to lower the hammer lug a little, until the safety works properly, and then adjust the cocking point until you have the same gap between cocking and firing as you did before.
__________________
It's just like a battle zone, you got a bottle and you're on your own.
Gotta be a Scotch or a Kamikaze, none of those other weapons will faze me.

Hundred, hundred, hundred bottles on the wall, you wonder if you can drink them all.
Got to go home by 1am, the bottle wins the battle again.
Husker Du - "First of the last calls"
Back when I was popular
Supporting a friend:
HustlePaintball.com for Spyder paintball guns, Dye Markers, WDP Angel 1 and of course the Hustle Hotties.
Uziel Gal is offline   Reply With Quote
Old 08-25-2006, 07:56 PM   #40
Sargent111
Registered User
 
Join Date: Apr 2006
how do u change the cocking point?
Sargent111 is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 01:58 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Help / FAQ  |  Contact Us  |  About Us  |  Advertising Info  |  Link to Us  |  Privacy Policy  |  Terms of Use
Top

Paintball Review

Copyright © 2000-2007 Hillclimb Media