Tippmann 98 custom pump

wacaca · 02-10-2011, 05:31 PM

Hi I a turning my tippmann 98 custom into a pump but I am wondering what is the best way to go about doing this?

AmbushOrigin · 02-12-2011, 04:40 AM

itd be pointless. As the gun would still be able to fire without pumping it. Not to mention the amount of force youd have to apply on a pump stroke just to set the hammer.

Ironman289 · 02-12-2011, 06:38 AM

Ive seen one done, it worked but it wasn't all that great and it was not very reliable. If you want a pump tippy Id suggest getting this :http://www.pbreview.com/products/reviews/32/

wacaca · 02-12-2011, 02:16 PM

Actually I just finished it a few minutes ago and it is actualy better than I expected. I removed the hammer o-ring, then drilled a hole to vent excese blowback gas, removed the screw for the cyclone or R/T and atached a 1/2 inch steel tube from the hammer to the pump handle on the barrel. All it cost me is 45 minutes of my time.

trolleyman98 · 02-13-2011, 07:55 PM

I haven't posted on PBR in almost two years, but your modification intrigues me. Pics/Vids?

wacaca · 02-14-2011, 03:55 AM

Pics will be up tonight.

Ironman289 · 02-14-2011, 02:09 PM

Quote:

Originally Posted by wacaca

http://ca.mg202.mail.yahoo.com/ya/do...ean=0&inline=1

cant get the link to work. Just says "server error"

AmbushOrigin · 02-14-2011, 03:00 PM

bc its yahoo mail

u have to save the file to your computer, and then host it someplace to get a link from it

wacaca · 02-14-2011, 03:39 PM

<a href="http://s1137.photobucket.com/albums/...edownload1.jpg" target="_blank"><img

src="http://i1137.photobucket.com/albums/...edownload1.jpg" border="0" alt="Photobucket"></a>

tell me what you think. These links work right here.

Ironman289 · 02-14-2011, 05:53 PM

Quote:

Originally Posted by AmbushOrigin

bc its yahoo mail

u have to save the file to your computer, and then host it someplace to get a link from it

I see, I didn't read the link I just clicked on it. As for saving it I'm at work so I can't do that.

wacaca · 02-15-2011, 05:24 PM

Quote:

Originally Posted by Ironman289

I see, I didn't read the link I just clicked on it. As for saving it I'm at work so I can't do that.

I put in new links to photo bucket instead of rogers and I deleted the broken links so there is less garbage. The links are above ^^^^^^^.

Ironman289 · 02-15-2011, 05:48 PM

Looks good, lots of RED paint. How does it shoot? Is that a "custom" drop on there?

wacaca · 02-15-2011, 06:25 PM

Quote:

Originally Posted by Ironman289

Looks good, lots of RED paint. How does it shoot? Is that a "custom" drop on there?

I ran out of other colors so red was all I have left. The drop forward and pump handle is made out of a stand for rockband drums. It has a barrel from an alpha black and I milled of the rear sight and front grip. To test it I put 100 balls through it it shot well my biggest worry was that when I shot it the pump arm would bend but it did'nt end up bending. The only problem I have is the front screw gets loose after every 75 shots other than that this thig is pretty good, and that sticker just makes me feel good

wacaca · 02-17-2011, 01:15 PM

I forgot to add that it has a lot of kick. The kick is double what it was before. Does anybody have any suggestions of something else I should do to it I was thinking of a proper pump handle or a bigger foregrip.