Up for sale are various Timmy and Quest parts and other general maintenance items. Great for custom or Spimmy builders!
**Shipping is a flat rate fee for all items - PLEASE ADD $2.00 TO ALL ORDERS FOR SHIPPING.**
I do not accept trades. Prices are are NON-NEGOTIABLE. I accept PayPal, MO & cash.
DXS Pulse RF module harness
Price: $10.00
This is a direct inline plug-in harness for 2k2, 2k5, Alias platform and Gen4 Intimidators, Marq series, and Defiant 2.
Plugs in between the battery harness and the solenoid, and you solder the ends of your Pulse RF module wiring to the bare leads on the harness. Shrink tubing is included to protect your soldered wires.
NOTE: There has been recent discussion of STOCK Bob Long boards not putting out a consistent voltage at high rates of fire for the RF transmitter - check THIS POST for more information. The Pulse RF module may not work consistently with STOCK Intimidator/Defiant/Marq boards but has been confirmed to work well with aftermarket boards that send a constant 5v to the solenoid.
FEP QUEST LASER EYES
Price: $25.00 PER PAIR
GREEN - BLUE - RED available - All laser eyes support 20° misalignment.
* Laser eyes for FEP Quest markers Gen 1-3, o-ring included for receiver eye.
BL Markers Wiring
* Alias/D2 battery harness ($10.00)
* Alias eye harness ($10.00)
* Intimidator eyes ($10.00 per eye - $17.00 per set)
All eyes allow for 20° of misalignment and are more powerful than stock eyes. O-rings included.
* 06/Gen4/Defiant 2 eyes ($20.00)
All 06 eyes allow for 20° of misalignment and are more powerful than stock eyes. O-rings included.
* 05 Wiring Combo ($32.00) - Save $5.00!!
Pick up a battery harness, eye harness, and a pair of eyes and save $5.00 over buying them separately.
FEP Quest Wiring
* Quest battery/solenoid harness ($15.00)
* Quest eyes (non-laser), allow for 20° of misalignment ($20.00)
Intimidator/D2 Barbs & Hose
* Nickel plated high flow barbs w/fiber washers ($2.75/ea)
If you can fit an .050" allen key through the barb, it is high flow. However, for maximum flow, you want a barb which will fit a 1/16" allen key (as pictured)! These are the same inner diameter as Hybrid "Hyper Flow" barbs, for max flow.
* Intimidator hi-flow hose ($1.00/ft)
High flow tubing for Intimidators. This is the same inner/outer diameter as Hybrid "Hyper Flow" hose that comes in their kits (this is larger than your stock Timmy hose).
* Autococker hose ($1.00/ft)
General purpose low pressure tubing for Autocockers and has slightly smaller ID/OD than the Intimidator hi-flow hose above. Can also be used to replace hose on Classic and 2k2 Timmys that have their original "standard flow" barbs installed.
O-Rings
* Quest o-ring kit - 1 complete marker rebuild ($5.00)
Basic single rebuild kit, replaces every o-ring on your Quest.
Note: It comes with TWO polyurethane (milky white) o-rings. The proper one for the breech and the middle bolt o-ring.
* 2k2 o-ring kit - 1 complete marker rebuild, 1 ram bumper ($7.00)
This is the basic kit, but offers a complete replacement of all o-rings on your 2k2 Timmy.
Poppet•HPR Housing•LPR Housing•HPR Internals•LPR Internals•Reg Block•Ram•Ram Cap•Bolt•Ram Sleeve•Ram bumper
NOTE: Unlike some other kits for sale out there, these kits include genuine white teflon pin valve rings AND the correct OEM sized rings for the ram sleeve and reg housings. Contrary to what is listed in the 2k2 Bob Long manual, the proper ram sleeve o-rings are NOT correct and the sizes listed for the LPR/HPR housings are also wrong. The manual even fails to fully identify some necessary o-rings on the regs! Needless to say, the proper sizes are crucial to good air seals. While some other sellers carry bulk kits for many different markers and simply take the specs out of the manuals as correct, my kits are built from experience gained by building Timmys. Every o-ring in my kit will be a direct replacement, properly sized for your 2k2 parts listed above.
* Alias o-ring kit - 1 complete marker rebuild ($6.00)
Single rebuild for your Alias style marker.
NOTE: This does not include the "specialty" rings such as u-cup and square LPR ring, rather has fully compatible round o-rings as pictured.
* Gen4 (Empire 2 / Infamous / Ripper 3) o-ring kit - 1 complete marker rebuild ($6.00)
Single rebuild for your Gen4 marker.
NOTE: This does not include the "specialty" rings such as u-cups and square LPR ring, rather has fully compatible round o-rings (not yet pictured).
* O-ring pick ($2.50)
If you've ever had to remove the small poppet o-ring you will REALLY appreciate this item.
* Team Kit ($35.00)
The team kit includes enough o-rings for FIVE complete marker rebuilds (
100+ o-rings!), five ram bumpers, 1oz of Dow 55 (or Dow 33 if you choose), 3/4 oz of Tri-Flow, and an o-ring pick. Comes packaged inside compartmented plastic box. Also, a diagram will be included so the correct o-rings can be found quickly and easily - no guesswork! Diagram will consist of actual o-ring locations (i.e. bolt o-rings, ram o-rings, etc) rather than vague sizes. Also available for Alias style markers.
Individual O-Rings & parts:
* individual teflon pin valve o-rings ($0.50/ea)
* individual ram sleeve & LPR o-rings ($0.50/ea)
* all other individual o-rings ($0.25/ea)
* Intimidator ram bumpers ($1.00/ea)
* Intimidator stiff (clear) detents -
SOLD OUT
Macroline & Fittings
* Macroline ($1.00/ft)
High strength macro - your choice of black or translucent white.
* 90 degree swivel fittings ($4.00/ea)
* 90 degree non-swivel fittings ($3.00/ea)
* straight fittings ($3.00/ea)
Stainless Steel Screws
Replacement stainless steel screws for
both 2k2 & Alias style markers. Replace your old worn out screws with these polished high strength stainless steel screws.
NOTE: the only screws NOT INCLUDED in the 2k2 kits are the ram sleeve set screw and trigger pivot screw (sold separately). The Alias kits *DO* come with all set screws (LPR & ram sleeve) but again, no trigger pivot screw.
* "Basic" 2k2 SS LCD screw kit - 15 screws, 3 washers ($7.00)
Included are Rubber grip screws•Trigger frame (clamshell halves) screws•LCD Trigger frame mounting screws•LPR block mounting screw•Eye cover screws•Three washers
NOTE: Washers may not be necessary to use in every situation, but I like to include them in my 2k2 kits.
* "Extended" 2k2 Clamshell SS screw kit - 15 screws, 1 o-ring ($9.00)
Included are Circuit board retaining screw WITH insulator o-ring•LCD screen screws•On/Off switch screws•Solenoid screw•Side plate screws•Trigger microswitch screws
This extended clamshell kit will replace every screw inside your 2k2 LCD clammy. It contains those small, hard to find, and finely threaded "specialty" screws that somehow manage to get lost over time or when buying used parts. Kit also comes with rubber o-ring for the circuit board screw, which serves as an electrical insulator. A very necessary but often overlooked item.
* "Complete" 2k2 SS screw kit ($15.00)
All screws and accessories listed in both the "Basic" and "Extended" kits.
* "Boxed" 2k2 SS screw kit ($21.00)
All screws and accessories listed in both the "Basic" and "Extended" kits, complete set of 6 hex keys for Timmys (includes the large regulator screw key, kits fit both 2k2 & Alias), packed in a sturdy plastic storage box with adjustable compartments.
Also available for Alias style markers @ $17.00 per kit.
* "Complete" Alias SS screw kit - 18 screws, 1 o-ring ($10.00)
Included Rubber Grip Screws•Trigger Frame Screws•Trigger Frame Mounting Screws•Upper & Lower Circuit Board Retaining Screws (Lower w/insulating o-ring)•Eye Cover Screws•LPR Block & Ram Sleeve Set Screws (black).
NOTE: Most sellers don't include the larger set screws in their Alias kits! This is a COMPLETE kit to replace every screw on your Alias (Except trigger pivot screw, sold separately).
CHECK THE FIRST SECTION OF THE NEXT POST DOWN FOR INDIVIDUALLY PRICED SCREWS & BLACKOUT KITS!
Linear Mode
