Diablo Wrath Problems..

[toddydive]

I have a Diablo Wrath and have a problem...

It is a standard marker with a 88/5000 tank and a Dye rotor loader. Running at 310fps.

It shoots fine but when I start pulling the trigger fast it just losers all power and it just drops off, If I wait about 2 secs its all good again but starts having problems again when you start shooting fast..

I have pulled it to pieces and cleaned and lubed it all.

If anyone out there can help me or have had a similar problem any help would be cool..

Cheers!!

[paintballer099]

it seems like you recharge time is slow.. try increasing the recharge or your dwell a bit then see what happens..

[bradthelegend]

I also have a Wrath with some problems.

My Wrath LTD kills gauges. Somehow the pressure is set so high on the vertical reg that it just blows out gauges and then leaks air. I've tried taking the pressure down, but I think something is wrong internally.

Any ideas on how to fix this?

[Zofarr]

bradthelegend: It sounds like you may have your hoses turned around. If you look in the hole on your reg and see a bronze pin in the middle of a spring, that is the hole your ASA SHOULD be having air flow into.

Also try using a diffrent tank, OR ASA if it is possible.