pbReview.com - Paintball Reviews and Paintball Fields

  Join pbReview.com  |  Log In  
pbReview.com - Paintball Reviews and Paintball Fields

Search:

  
Home     |     Paintball Articles     |     Paintball Videos     |     Paintball Gear     |     Paintball Fields     |     Paintball Stores     |     Hot Deals     |     Paintball Forums     |     Chat
Go Back   Paintball Forums > Specific Marker Forums > Smart Parts > SP-1


Reply
 
Thread Tools Display Modes
Old 12-20-2007, 08:57 PM   #1
iliveforthis99
Maher
 
iliveforthis99's Avatar
 
Join Date: Feb 2005
Location: Six feet under
Disassembly of the SP-1

Here’s a little guide to break the SP-1 down and get access to the bolt assembly

First things first degas and unload the marker and remover the barrel.


Tools needed:
1/8 inch allen wrench, 5/16 inch allen wrench, barrel swab, and Dow 33 (SL33K) grease.

Step 1:
Use a 1/8 allen wrench to unscrew the two screws holding the back cap on.






Step 2:
Use a 5/16 allen wrench to unscrew the bolt sleeve and then pull it free from the body.




Step 3:
Insert the barrel swab down the shroud and gently push the bolt out the back of the gun.




Step 4:
Slide the bolt stop off the back of the bolt so you can get to the inner o-ring on it. Clean the bolt off from paint and old grease, and inspect o-rings for damage, Then lube the bolt/bolt stop o-rings and the ones on the bolt sleeve with Dow 33 grease.


Step 5:
Insert the bolt into the bolt sleeve.




Step 6:
Tip the marker up and then insert the bolt and bolt sleeve back into the body. Then screw the bolt sleeve back in being careful not to over tighten. Screw the back cap back on and you’re ready to go.
__________________
Feedback 13+/0-
iliveforthis99 is offline   Reply With Quote
Old 12-21-2007, 03:48 AM   #2
Zaunji
Banned
 
Zaunji's Avatar
 
Join Date: Sep 2006
Location: Southern Ontario
Send a message via MSN to Zaunji
Good job. I'm probably getting an SP-1 soon too, it seems like a pretty solid gun for the price.
Zaunji is offline   Reply With Quote
Old 12-21-2007, 05:13 PM   #3
iliveforthis99
Maher
 
iliveforthis99's Avatar
 
Join Date: Feb 2005
Location: Six feet under
Thanx. Yeah so far it seems pretty solid i've only shot a loader full through it so far but it shoots great. And as you see it's a very easy gun to strip and maintain. With no settings or modes to change on the board you don't have to keep taking the whole gun apart. You should only need to do it to change the airlines.
__________________
Feedback 13+/0-
iliveforthis99 is offline   Reply With Quote
Reply



Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -8. The time now is 09:28 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Help / FAQ  |  Contact Us  |  About Us  |  Advertising Info  |  Link to Us  |  Privacy Policy  |  Terms of Use
Top

Paintball Review

Copyright © 2000-2007 Hillclimb Media