Hammer FAQ - Page 3

SmittyTheMaster · 08-16-2002, 08:09 AM

IT CAME WOOHOO!!!

SmittyTheMaster · 08-16-2002, 09:09 AM

all american wont fit in the pump handle so that needs a little sanding, but the stock barrel is pretty good, i had like no CO2 and it was still shooting pretty nice, any does anyone happen to have a diagram of it, its not on the kingman site, i dont wanna lose any pieces

HammerBoy · 08-16-2002, 09:14 AM

Look on the bottom of the pump handle...there should be a small phillips head screw...unscrew that and take out the inner plastic sleeve in the pump handle...then your all american will fit nicely...and the hammer should of come with a diagram sheet of all of the parts...if you didnt then i dunno where you could get one...glad you like your hammer...

HammerBoy · 08-16-2002, 09:18 AM

YAY! my progressive just came!!!!!

SmittyTheMaster · 08-16-2002, 10:20 AM

oh i was wondering what that screw was there for thanks

and i found a diagram it i'll post it

SmittyTheMaster · 08-16-2002, 10:53 AM

here is the diagram (features may vary)

brownc4 · 08-28-2002, 08:28 AM

Did this last weekend with some Fine grade steel wool and mothers with my dremel. Takes about an hour or so and is so easy. I highly encourage this. Now polishing the outside to remove scratches (when I got my hammer it looked liked it was drug behind a car for several miles) and give it a mirror finsh, that is a pita!! still working on that one.

bunkermonkey77 · 10-01-2002, 03:43 PM

i bought a hammer used from a ref friend recently and im looking to upgrade it... i was thinking id try making it a stick feeder and converting it to vertical air... i just gotta get brave enough cuz i dont wanna mess it up!

do u think i could just like screw in an elbow in an odd position so that it pointed towards me then attached a 10 round tube with the bottom cut off for a stick feeder? i dont have any pvc lying around here and im very simple...lol

TopSpyder024 · 12-25-2002, 02:36 PM

sorta off topic here: while i was just browsing around in the pump section i stumbled across this thread and saw about drilling a hole through the striker; so i was wondering if i could do that to the striker in my spyder since there are not many more upgades i can buy for it and those are pretty costly, haha ------ electro frame and an egg2 that is. anyway, i would be very thankful if someone could help me out here. thanx very much, you nice gentlemen out there (or should i say "no, not me mr sniper!" haha)

paintball-scott · 03-27-2003, 06:02 PM

all ive been trying to figer out how to put a better barrel on my hammer

and that guy said take off the screw on the pump handle then take off the sleve inside

wow it works im so happy

someone is going to die now with my new all-american and other barrel to fit in my hammer
me so happy

thanks
thanks
thanks

nahthan · 04-28-2003, 06:02 PM

Quote:

Originally posted by bunkermonkey77
i bought a hammer used from a ref friend recently and im looking to upgrade it... i was thinking id try making it a stick feeder and converting it to vertical air... i just gotta get brave enough cuz i dont wanna mess it up!

do u think i could just like screw in an elbow in an odd position so that it pointed towards me then attached a 10 round tube with the bottom cut off for a stick feeder? i dont have any pvc lying around here and im very simple...lol

i'd take an adjustable elbow and put it in there while leaving it loose enough to pull out yet tight enough to not fall out, or id carry a screwdriver on a string

tonysk83 · 05-27-2003, 06:08 PM

Quote:

Originally posted by nahthan

i'd take an adjustable elbow and put it in there while leaving it loose enough to pull out yet tight enough to not fall out, or id carry a screwdriver on a string

paintball-scott · 05-30-2003, 08:24 PM

how to make the new hammer fit a 7/8 elbow and what hopper to get for about a 100 rounds

i need something better then the stock hopper

i was thinking to cut down the arm to the elbow or getto rig it some how

any suguestions if so thanks

YellowMaranello · 04-21-2004, 06:03 PM

Hammerboy,

You wouldn't happen to have any pics of your vertical air Hammer lying around would you?

schoolsukz08 · 04-22-2004, 10:17 AM

Quote:

Originally posted by YellowMaranello
Hammerboy,

You wouldn't happen to have any pics of your vertical air Hammer lying around would you?

Look in his sig.

XxtippxX · 02-19-2005, 11:16 AM

they stoped making hammers (at least of what ive heard) because out of buisness

Deep Thought · 05-07-2005, 03:53 PM

I also own a hammer. I beleive mine is a new style hammer, with the crappy plastic m-16 grip. Mine came with a decent 12 gram changer, and I am looking to convert it to take large tanks. do I need anything special or what? This thread was very helpful, as the velocity is quite low on mine, and I think some of these mods and such should help my velocity.

DT

3022 · 01-06-2006, 10:53 PM

Quote:

Originally Posted by Deep Thought

... I am looking to convert it to take large tanks. do I need anything special or what? DT

I would recommend you 9oz tank with siphon tube and raised sight rail.

pudamobile · 03-12-2007, 07:17 PM

We ought to start a Hammer Archive, much like there are Archives for every other PBG out there...maybe even throw some pics up.

Lenny17 · 03-16-2007, 07:22 AM

This FAQ does need some updating. Most of the links are dead, and it is hard finding good info on Hammers out there.