These are for the 2000 and newer Autocockers only!! This chamber replaces the allen bolt that holds on the air block (pneumatics). But first, here are some added benefits by using one of these chambers. Holds more volume, much more by extending the valve chamber. High air flow design with 1pc stainless steel construction. Lighter weight by increasing bore size and removing excess material No chrome plating to chip, which can cause internal gun leaks if it chips. Polished, appears just like chrome. Offers better clearances around the Reg. and 3 way. Chambers are 3 1/4" long.
The New Designz Low Pressure Chamber is newer, so it should be commonly available, both new and used.
this is a great upgrade for any cocker, it looks cool, lowers the operating pressure, increases shot to shot consistency, and slightly increases accuracy. the bad part about the lpc is that it can kinda clutter the pneumatic area abit. I had to go the my paintball supply store to by new hoses because my original didn't reach all of the way around the chamber. i heard that it made the gun quieter but it was negligible. the instaltion was pretty simple(make sure you have enough hosing and some teflon tape) If you don't know what you are doing than i would study up on how to take apart your cocker or have a shop do it.
This is a very inexpensive upgrade for your cocker, and it makes your gun look unique. it doesn't really quiet the gun down that much though. I would say that this is an excellent part to buy for your autococker.
Syndicate Cocker, ST Front Reg, ST Superfly, ST Inline Reg, ST Rat 3 Valve, Palmer 3-Way, Matchstick Barrels, ND LPC
Larger than expected. May not fit on e-bladed cockers.
Like I said before....NO HYPE...delivers. For the performance minded, this thing is a great addition for being on the cutting edge of LP. Additionally, the LPC is large and the chamber inside is equally as volumous. In combination with my other parts selection, my cocker shoots and I play around 180 psi.
A little on the steep side for what it actually is.... large resevoir of air. For those who search for the grail of ultra sensitive markers on paint, this may help. I have a personal fixation with performance and this small part helped me acheive the lower pressures I was looking for.
blue '03 autococker 16" Custom products one peice barrel 91 ci 4500 bulldog 2 ans gen-x 3 reg egg 2 rat 3:16 valve warped delrin bolt eclipse e-blade shocktech lpr and ram New Designz Low Pressure Chamber
More air volume
Nothing, it does its job
The install wasn't difficult or complicated, the only problem I had was that my lpr hose wasnt long enough to reach to my 3-way. When I gased it up and shot it out in the back yard I noticed it was shooting hot (no chrono) at 200 psi which used to put my gun right at 280 fps. Now it shots at 170-180 psi. Its nice because my psi/shot has decreased about 2 psi and i get a few more shots off of one fill.
I recomend this product if you want to lower your marker's pressure for not a lot of money. 200 psi is pretty low prssure but $30 to lower the marker's pressure by 30-40 psi is worth it to me.
hmmmm... for this ill go with my custom milled turtled eblade cocker. with dye boomstick nexxus ram and pe qevs with new design stablizer, shocktech fgp lpr, tornado valve phat hammer, 04 gladiator regulator, supafly bolt, hybrid eye cover
It does what it is supposed to do. drops pressure by atleast 50 psi
hard to fit it in there with qev's. looks cluttered, sucks to clean
Well i got one of these because it is supposed to drop pressure and it dropped mine by 50 psi. job well done there. they look sort of neat as well. but with the qevs and the big electric 3way and the fgp lpr it is a little hard to fit in there. dont even think about useing the small cut down blocks for this. It took me like 1 hour to put it in because i had to take things off and turn things to make it all fit. but after i did that aired it up and set the gun up lower at about 50 psi lower it worked well.
It does what it is supposed to do. Not much money. If you want a little something extra pick one up.I give this a nine because of a few minor things, it makes the front end cluttered and hard to clean. and with all the stuff that can be put on a front end it takes some time to get it all to fit. It also only comes in that nickel color as well, ooo well. Also if you want to make your gun look really different hook one of these up to the bottom port hole with a 90 degree elbow or throw another lpr down there if you want to be real different.