Dual Full pressure ported design. This part allows for higher flow and is set at a 15 degree angle for a better feel. Includes Check It Torpedo Tube for that custom look and feel. All edges are radiused and polished for absolute comfort. Ported for gauge. Micro Gauge not included.
The Check It Products 15° Assault Block is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
Black Dragun, 15 degree assault block, madmann rocket valve, madmann spring kit, CiP PowerStation, CiP Speedy Drop forward+ASA, Hybrid-Technologies ITB2 bolt, Magnum AP striker, Pipe barrel kit, Halo B, 2003 lcd board.
Light aluminum, changable expansion chamber if your looking for that special look, lowers operating pressure
lack of colour choice, a bit pricy
Definitely a must have for BlackDragun owners, its a really nifty thing. Your hand doesnt get cramped because its in a more relaxed position, only downside is that when your laing down its a bit harder to hold, but u can always hold it by the expansion chamber/regulator. It lowers your operating pressure, not by much but i noticed a bit of a difference. The screw holding it down has to be tightened well, other wise you'll get play side to side. There's the ability of modding it, if you want more air flow, u can enlarge the port that opens towards the valve. Its also light weight, and has a very nice look to it. CiP cold offer more colour choices though.
Its a great product, a must have for every gun owner, isn't that expensive, only 40 or 45 bucks, a little pricy for some people but its worth it tho as it lowers the pressure a bit and gives u that comfort wrist position. The product, itself, is just amazing, light and solid structured, what more can u ask for? other then more colour choices :p heheh
10 out of 10
Last edited on Sunday, November 30th, 2003 at 5:42 pm PST
Dragun T.E.S with 20 oz. co2 tank and 9v revvy......stock except for the 15 degree assault block
-Looks really good
-Lowers operating pressure
-Screw is to long
-Threads not great
-Not as high flowing as I hoped
I got this product and when I tried to screw it into my gun, the threads stripped, but I fixed it, then I figured out the screw that came with it was to long, but I cut it and filed it so it worked. Make sure you screw it in all the way (tight) because if you dont it will move a little. Those are the only problems I have had, nothing to major.
This is an awsome upgrade for any Dragun, or Spyder clone for that matter. It looks and feels awsome and it lowers operating pressure, and is a simple and un-expensive upgrade. You can also put a gauge on it if your front block doesn't have one, which can be very helpful it you want to fine tune your gun.
9 out of 10
Last edited on Tuesday, July 5th, 2005 at 9:03 am PST