Zenitram Manufacturing Dragun Tooth Trigger Straight Reviews

Sponsored Links    Discount Zenitram Manufacturing Buy Zenitram Manufacturing Dragun Tooth Trigger Straight Paintball Dragun Triggers and Frames Paintball Hoppers Paintball Clothing

[ Add Your Photo ]

Number of Reviews: 10 Average Rating: 9.8 / 10 Manufacturer Website: Click here Suggested Retail Price: $20

Manufacturer Description Subscribe to Reviews on this Product - Edit this Product Listing The trigger plate is 6061 aluminum with stainless steel hardware. Trigger plate is fully adjustable in 3 ways: forward travel, switch contact and pull travel. With this level of adjustment, you can get your pull down to 1/32". Product Availability   The Zenitram Manufacturing Dragun Tooth Trigger Straight is older, so while it may be available used and in a few cases new, it is not commonly available anymore. Places to Buy No Stores Sponsored Links

Write a review and share your thoughts with other paintballers.

Show: Most Helpful First Least Helpful First Longest First Shortest First Newest First Oldest First Highest Rating First Lowest Rating First

mstrmellow Wednesday, November 19th, 2003 Period of Product Use: Less than a month 7 of 8 people found this review helpful. Paintball Experience: More than 5 years Similar Products Used: stock dragun tes trigger Marker Setup: 2003 dragun tes, palmer stabilizer, remote coil, 20 oz. CO2, j&j ceramic 14", halo b, polished internals, zenitram dragun tooth trigger straight Strengths: micro adjustible trigger pull, solid, nice finish, perfectly fits dragun tes Weaknesses: none really. only the top screw on the trigger face is needed for TES Review: I picked this trigger up after reading reviews on some forums. The stock Dragun TES trigger is passable, but the side-to-side and forward play was driving me crazy. You can get the stock trigger almost perfect with some work (add a shim, etc.) but I wanted to give the Zenitram a try. The trigger is easy to install (just pop out the trigger retaining pin on the marker, put the new trigger in, and reinsert the pin). You then adjust the screws with a very tiny allen key (NOT INCLUDED). There are 3 adjustment screws on the Zenitram. The only one you need to worry about for the TES is the middle one (top screw on the trigger face). It just so happens that this screw, once adjusted out from the back of the trigger face (1/16 of an inch), contacts the trigger firing switch on the TES perfectly. Once I had it dialed in, I had the sickest trigger pull ever. Conclusion: This trigger rules. Even though it wasn't originally designed for the TES model, it fits perfectly (no sanding needed) and eliminates all side-to-side slop. The one screw adjustment that matters does its job very well, and you can dial in a mouse-click trigger pull, with no slop. I love this thing, I would recommend it to anyone with the TES. Rating: 10 out of 10 Last edited on Wednesday, November 19th, 2003 at 12:07 pm PST I found this review   0 Comments - Add Comment

bcsixpak2001 Monday, August 16th, 2004 Period of Product Use: 3 months 2 of 2 people found this review helpful. Paintball Experience: 1 year Similar Products Used: Stock Triggers: Dragun, Spyder, AKA Viking Marker Setup: Spyder w/ T1 Kit Halo B Powerlyte 14" barrel kit AKA SCM-2 LPR AKA 2-Liter HPR APM Tigershark Bolt Eclipse QEV Zenitram 3-way adjustable Trigger Worr Drop Forward Crossfire 68/4500 Strengths: Fully adjustable. Eliminates most side play. Solid feel. Weaknesses: Can be difficult to install if you dont have proper tools. Review: When I recieved the T1 kit, the stock dragun trigger wasn't all that bad. It was plastic...but it was pretty tight fitting and was fairly comfortable, impressive for a cheap upgrade kit i would say. But when i installed the zenitram, I was actually pleased with my "up-untill-that-point-slightly-dissapointed" purchase. All the side play was virtually eliminated! Leaving a nice and easy striat pull for my fingers. I love the adjustments, they really placed them where it is crutial. Allows for perfect released and compressed resting points, so basically when you start pulling the trigger, its immediatly activative the switch. Make sure you put a touch of nail polish on the threads, the clear coat stuff (just a little dab). This makes the screws sit tight, but allows them to move if needed. Conclusion: Over all, I would say this is a must if you plan on shooting higher ROF. Buying all the usual marker upgrades allows YOUR GUN to perform faster, now get this zenitram trigger so YOU CAN perform faster, good buy. Rating: 10 out of 10 Last edited on Monday, August 16th, 2004 at 10:33 pm PST I found this review   0 Comments - Add Comment

[NA]NomaD Wednesday, April 2nd, 2003 Period of Product Use: Less than a month 2 of 2 people found this review helpful. Paintball Experience: More than 5 years Similar Products Used: CIP Sweet Spot Trigger (straight) Marker Setup: M3 LCD Black Dragun CIP Delrin Bolt Zenitram Dragons Tooth ( Blade) Dark Horizion Titanium Hammer CIP 15 Degree Assualt Block Bob Long Torpedo Maddman Rocket Valve Shochtech Medium Drop 32Degree on/off adapter 2k2 Smart Parts All American 10" Freak Tip & 12" AA tip PMI PE 68/3000 Strengths: The range of adjustment alone is worth the investment. Weaknesses: None Review: For the same amount of cash the CIP Sweet Spot, I got a Zenitram Blade Dragons Tooth. Instead of one adjustment on the CIP, the Zenitram has 3, making it easy to rip with this thing, It Rips just as easy as my Nasty Impy. Buy it you wont be disappointed. Conclusion: Cip Sweet Spot is a definite improvement over the stock, but if you want the best get The Zenitram. Rating: 10 out of 10 I found this review   1 Comment - Add Comment

daedalis Sunday, August 8th, 2004 Period of Product Use: 3 months 1 of 1 people found this review helpful. Paintball Experience: 3 years Similar Products Used: Stock Trigger Marker Setup: Dragun T.E.S Black to Blue Fade, Zenitram Straight Trigger, Tigershark Bolt, DOP Bullet Style On/Off Drop Forward, Crossfire 68/3K HPA, Freak Complete barrel system Strengths: Adjustability, Tightness, Clean Pull, Lightweight Weaknesses: None. Review: This trigger is a must have. With three adjustment screws, you can get this trigger to fit ANY desired feel. Zenitram manufacturing got me this trigger in like three days, and I got it installed and adjusted in easily under 10 minutes. Shoots like a dream. A cheap and easy way to get efficient performance out of your marker. Conclusion: I would recommend this trigger for anyone who like having total control over there trigger pull. No flaws, and perfect adjustability. Rating: 10 out of 10 Last edited on Sunday, August 8th, 2004 at 6:00 pm PST I found this review   1 Comment - Add Comment

wrenchbender Sunday, May 2nd, 2004 Period of Product Use: Less than a month 1 of 1 people found this review helpful. Paintball Experience: 3 years Similar Products Used: stock triggers with home mods Marker Setup: Green to Black T.E.S. with Evolution hopper, Freak barrel, Check It feed neck, Spudnuk'l nylatron bolt, Dragon tooth trigger, HPA. Strengths: Fit and adjustments Weaknesses: none Review: This trigger drops right in with good fit and function. It's now made for the TES and not just modified. The full trigger adjustment, forward travel, trigger stop and switch contact, lets you get as much trigger bounce as you want. I had a paint hitting the 50 with paint still leaving the barrel, more bounce than I like. It takes some getting used to and you'll go through some paint until you get it just the way you want it. Conclusion: The product quality is good, nothing bad to say about it. In my opinion for the TES it's an improvement but not a must. Rating: 10 out of 10 I found this review   0 Comments - Add Comment

joeballer Tuesday, May 20th, 2003 Period of Product Use: Only tested 1 of 1 people found this review helpful. Paintball Experience: 3 months Similar Products Used: Stock BD Trigger Marker Setup: Stock BD with expansion chamber instead of stock reg, 12v Rev. Hopper w/ Xboard and 24 oz Co2.... Strengths: VERY short trigger pull... Aluminum, so it won't break easily Adjustable 3 ways Weaknesses: Too big for trigger frame No instructions Review: This thing was a pain to install. First I had to sand down the entire inside of my marker where the trigger fits into, just to get it to fit. This is a task in and of itself...Once you do this, its all gravy though. Just pop the trigger in, put the holding pin in, tighten the top screw, tighten the bottom screw, adjust the middle screw, test and fire. Its an ULTRA SHORT trigger pull.. This is a MUST get for anyone with a BD. Conclusion: I think this is the best trigger money can buy for the BD. It is adjustable 3 ways, made of solid aluminum, its affordable, and elminates ALL play that the stock trigger had. I reccomend that everyone who has a BD go out and get this.... Rating: 9 out of 10 Last edited on Tuesday, May 20th, 2003 at 9:14 am PST I found this review   1 Comment - Add Comment

armorlite Wednesday, April 27th, 2005 Period of Product Use: 1 year Paintball Experience: 2 years Similar Products Used: Stock Marker Setup: Dragun The One Scenario Dream T-board w/ Ultra Chip Powerlyte Scepter Kit Barrel Alamo City Delrin Bolt w/ Delrin bolt pin Alamo City Delrin Ram Zenitram Tooth trigger blade Zenitram Lpr adapter MacDev sonic Lpr MacDev 04 Gladiator regulator Rex Paintball Speedneck feedneck Wgp Worrgas 70/4500 hp tank QEV (quick exhaust valve) Radio Shack switch with lever modded JDMOTO Super Eyes Empire Reloader B Hybrid push on/off asa Shaved Cup Seal Ported & Polish Valve Strengths: Makes a lighter Trigger Pull Helps Shoot Faster Adjustable Weaknesses: None Review: Well i didn't like my stock that much so i got this and it just really helps! it makes it much easier to walk the trigger which equals to shooting faster It's Adjustable which i can adjust to my liking. i walk my trigger way faster than with the stock trigger which is only one way adjustable..... I've only heard good reviews on this trigger and i'm adding to the list Conclusion: I'd Recommend this b/c it is so helpful and works flawlessly dont forget to Loctite the screws so they wont fall out of place or anything! Rating: 10 out of 10 Last edited on Monday, March 13th, 2006 at 6:40 am PST I found this review   0 Comments - Add Comment

pntballbmw Saturday, March 19th, 2005 Period of Product Use: 3 months Paintball Experience: 2 years Similar Products Used: dragun the one stock trigger Marker Setup: dragun the one: zenitram trigger, apache loader, shocktech supafly bolt, powerstation reg freak jr kit Strengths: Solid. Simple. Micro adjustment is big! Nice finish. Weaknesses: A little hard to install if u dont have right tools Review: I ordered this trigger at the same time as my new dragun the one, because i read here from other paintballers and they all recommended this trigger for the dragun the one. I got it before i received the gun and even before putting it on i was impressed. It was very light but felt real solid and the finish was perfect. Luckily i had an allen wrench set with the very small size wrench needed for the adjustment screws. When i got my gun i tried getting the pin that holds the trigger in out but it wasn't as easy as it looks. It is flush on both sides of the frame and it gives no indication of which way to push it out from. I emailed zenitram and their customer support is excellent. I had my question answered by three different people the next day. They really helped. You need to have a 1/16th screw driver or sting peice of metal and push it through from the right side. It took me a while b/c it kept slipping when i tried hitting it with a hammer. Finally i got it out but not with out a few scratches on my trigger frame. When i put in the new trigger it slid perfectly in. There was absolutely no side to side play at all and was much more smooth and comfortable than the stock plastic triggger that has sort of sharp edges. I adjusted the middle screw out just enough to touch the switch and adjusted the top screw out so that it pushed the switch in about halfway without tripping it and the bottom screw set about a quarter of a mm from the frame. This got my pull down to a quarter of a mm and greatly decreased the 150 gram pull of the switch b/c it was already halfway pushed. It made it so easy to walk and i can now easily get 15 bps where with the stock(i tested that one before i put in this one) i could only stay at ten if i was lucky. Conclusion: I highly reccomend this trigger to replace any stock trigger. I dont know about other guns but this one is perfectly matched for dragun markers after u get that stupid pin out. Also i reccomend putting a drop of clear nail polish on the screws to keep them snug. If not they will move while u shoot. Thats why im giving it a 9 Rating: 9 out of 10 I found this review   0 Comments - Add Comment

BlackdLCD Thursday, August 12th, 2004 Period of Product Use: 1 year Paintball Experience: 3 years Similar Products Used: CIP stick and curve also zenitram curve Marker Setup: M3 Black Dragun LCD 2k2 (ThE oRiGiNaL) Light BLue Zenitram stick trigger Lapso SS Bigshot PMI Pure Energy 68cu 3000psi Clear Evlution II Chrome CP Lightning Drop Chrome Bob Long Torpedo Reg Chrome CP On/Off ASA Strengths: Extreme sensitivity, fun to shoot and cool to have. also very easy to adjust Weaknesses: None its perfect Review: I love this trigger. It is the current one that is in use on my gun. I have it so sentitive the trigger pull is less than 50 g. also i added a lighter switch that i bought from radio shack. very simple mod that improves your ETF. I also like the fact that it is allimunum because it makes my set up much lighter. Conclusion: Go buy it, you wont regret it. two thumbs up ^^ Rating: 10 out of 10 I found this review   0 Comments - Add Comment

dogmeatistasty Friday, July 30th, 2004 Period of Product Use: Less than a month Paintball Experience: 3 years Similar Products Used: None Marker Setup: Dragun The One Timmy Delrin Bolt 14" Dye Boomstick OGI Clamping Low Rise Evo II - zBoard Aci 45/3000 Strengths: 3 Way Adjustable Weaknesses: None Review: This is a great trigger. It only cost me 25 dollars which isn't that bad of a price. My trigger pull is down to less than 1mm. This trigger will definately boost your bps. Because of the 3 set screws you can adjust the trigger to what ever angle you want. One thing is on the website they don't tell you that you need loctite (although its kinda obvious if you want your trigger to stay where it is). Conclusion: Very great trigger. Once you think you have everything for your gun buy this and finish your marker off Rating: 10 out of 10 I found this review   0 Comments - Add Comment

Write a review and share your thoughts with other paintballers.

Show: Most Helpful First Least Helpful First Longest First Shortest First Newest First Oldest First Highest Rating First Lowest Rating First

Places to Buy No Stores Sponsored Links