The 2003 Murder Inc B2K is a tournament players dream. It features Dual o-ring ball detents and a new grip frame that is ergonomically designed for comfort and speed. The 4 way adjustment is unlike any other. The trigger has 3 swing selections and the length of pull, actuation and spring tension are completely adjustable. Super fast.
The Murder Inc. B2K is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
Murder Inc 2003 b2k Spyder Em1 All Hooked Up
Black Dust All Stock (Pic is under the Spyder Forum)
Definatly a Evo II this gun is wicked fast theres no way your 12 volt would keep up except up to maby 13 bps. A Drop foward, nitro, and a New barrel, also if you dont like the durlin I would Reccomend the Supa Fly Bolt made by Shock Tech. If you have a 47 or a 48ci tank you dont get as many shots you need a nice 68 or 88 ci. (Note: Murder Inc Reccomends that you buy a Low Pressure tank so the gun is used to its full potential and also so its better for the Regulators CrossFire is the best choice.)
Other Stregths look in my Review
Look in Review Body
This thing is just a monster its fast, light, Accurate, and dead sexy :-p
When I first tryed it out in my back yard I was amazed with how fast I could pull the trigger with this gun and since it already comes with the lpr unlike the impulse I didnt even chop a ball.
Dont get me wrong the Impulse is a very good gun but If you bought this baby you would already have half the stuff the impulse would need ( Blade Trig, Lpr, New bolt, etc....) So your actuly saveing money on some of the upgrades the impulse would need.
Accuracy wise its very accurate but I think the accuracy is better with the one peice. The one peice is actualy reccommended by ICD because its smoother inside but the 2 peice makes the gun have looks and is still pretiy accurate over all.
The Lpr is great because it controlls the pressure of your bolt and the air flow of your gun and will give you a couple more shots perfill. The funny thing about adjusting it is you only need a quarter to adjust it .So always bring a quarter with you to the feild.
Has a 4 way adjustment which is great because its very consistant and adjusting it is very very easy
Oiling the gun....you dont!
(But ICD says spraying the hammer some times with Silicone Spray will work fine
or lubing it with lithium grease)
Its only one mode (semi auto) so its automaticly Torny Legal unlike the b2k2 you need to fool around mode of fire so makes things a lil easier.
Takeing the gun apart is simple and easy especially when your cleaning it. To clean the gun all you have to do is pull out the pull pin and the bolt comes out rise the bolt off with warm water dry it completely then take your battel swab or paper towel and just run it through the gun then put your bolt and pin back in and your good.
Reliabilty Is awsome if you buy it from MI Paintball they will service and fix your gun for free for life (basicly Life time warrenty)
If you need anymore info just look in your manual when you get it basicly.
Key Stregths tho:Milling and Ano is awsome
Trigger Pull is excellent
Durlin Bolt Self Lubercates
I dont have to oil it
Cleaning it is fast and easy
Feild strip is very useful
Stock Barrel is Decent and looks cool
Cocker Threads makes barrel chooseing hell a lot easier
And when you air up the gun the bolt cocks it self
Other Weakness's tho:
The Regulator Gauge it comes with is big and annoying
I dont really like durlin but other wise its pretiy good
because it self lubercates
They only get one of these Babys in once a month.
My final Reccommendation for this product is buy it now.
Over all this gun is one of the best guns I have ever used in the Sport of Paintball its awsome and you wont regret buying it.
10 out of 10
Last edited on Tuesday, August 5th, 2003 at 11:48 am PST
Murder Inc. BkO 2k2 n 2k3, Murder inc b2k 2k2, ICD b2k and bko
Smart Parts 2003 Impulse, M.I. flame drop,ND pro delrin bolt, vision eye, dye sticky grips, evil respirator, vert. maxflow reg.,ND blade trigger, ND low rise, 70/4500 Murder Inc. Worr Gas, and more
drop, barrel( if you want the stock is a decent barrel), regulator, bolt
light easy to use and maintain has a sexy milling job and shoots fast
none really excpet the waiting list for it
A GREAT GUN!! This gun is light easy to use and maintain fast it can have the tendency to turn heads as well..lol..this gun is great performance wise aswell an awsome milling job and i found it fun to use. The trigger has 3 swing selections and the length of pull, actuation and spring tension are completely adjustable.
THIS IS ONE GREAT GUN GET IT IF YOUR LOOKING FOR A GOOD TOURNEY GUN. I deffinetly love this gun and is a great buy with the exception of a waiting list this gun is not a bad choice.....a drop is needed and a barrel if you choose. To get more details visit there site at www.murderincpaintball.com
MI 2002 B2k/Bko, angel and vaious other autocockers.
Get a new gun, go to East Coast Paintball
yea its light and likes to break
horrible milling looks like it was done in someones basement with a hand-held drill,
I know that i hated the 2002 guns and i hate these guns even more. They are the Same Gun!!!!! nothing new nothing changed.
with the chopping issue we used a halo 2 with new batteys and tourny paint so that was not the problem it was the gun
People dont be fooled by these people that have rated the MI guns at 10. It is a requirement put forth by the stores when you work for them and when you get a sponsorship as well as to vote everyday on their website for them so they can be #1 on that ranking site for paintball stores. Dont beefooled by these con artists they are no better than your common street thugs.
I have used this gun in 4 woods games and in 5 speedball games and i was amaized at how much they made this gun worse. It chops more and eats air like its candy.
MI has a policy with their guns that if you take them apart to fix them the warrenty is null and void unless it is done by them. So say your gun breaks after one game no one can fix it and then you are out of luck for the rest of the day even if it is just something as small as an O ring. Also when they "fix" the gun there always seems to be another problem that comes up and once again you need to get it fixed. My friend took it to them 3 times to get it fixed and still had problems with it. But when he took it once to another place they fixed it and now it works but still a cheap autococker is just as good
1 out of 10
Last edited on Friday, April 30th, 2004 at 6:35 am PST
When i saw my friend with this gun for the first time i was interested in it. I liked the milling but my friend was not too impressed with it. He said it looked crapy. It was the first milled gun i had ever seen so it was cool to me. The first few times my friend used the gun it worked relatively well. Our team all progressed in paintballing to the point where we all had high end markers. maybe about a year after i had met my friend the gun started in. Now this is testimony from him " THey say theres an eye in it. They told me so, but i cant see and eye in it and i do chop alot." I can vouch for the chopping, he does chop alot. Also it seems there is a warrenty on the gun, if you fiddle with it te warrenty becomes void. this is what i hear. so when my friends battery wire snapped he had to bring it back to MI and they fixed it for him no problem. but slowly the gun was deteriorating.he was chopping more and more and bringing it back to MI more and more. soon the chopping became out of control. that is where i am now. hes going to sell the gun on ebay and invest in an eye.
i said before to throw this gun out. i know thats a tad intrense but at the time i wrote this post i was pretty mad becasue my friends gun failed him during a tourney. The thing is it was chopping alot and it wasnt being fixed. everyone who replied to the post i am sorry for slaundering MI, and i am sorry Chris.
5 out of 10
Last edited on Tuesday, July 27th, 2004 at 9:18 pm PST