The Voodoo bolt is a bolt made of black delrin. This is a light, strong plastic material. The Voodoo bolt will replace your old, heavy aluminum bolt. The Voodoo bolt has no o-rings, has low friction, and doesn't need lubing. The light weight of the bolt will virtually eliminate the kick when the Impulse is fired.
The Voodoo Delrin Bolt is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
-strange board( team strange equalizer board )
- 16' fraek barrel
-jackhammer 2 LPR
-gladiator drop w/ on-n-off
-empire reloader b
-Chops a little bit (get a empire reloader b and it wont chop as much)
The bolt is very accurate and shoots smoth so there isnt that much blowback like other guns with cheap plastic stock bolts i' ve shot before.
The bad thing is that it chops to much and im tired of wasting time using the squegee. it will hardly chop if you get a empire relaoder b though, because i just got the relaoder for X-mas it choped alot less.
This bolt is very,VERY good but there are better bolts out there. But for the price you should get a voodoo.
9 out of 10
Last edited on Wednesday, March 30th, 2005 at 11:30 am PST
WAS Vision Pulse
New Designs LPR
Lapco Clamping Feedneck
Halo B w/V35
1. tight fitting, smooth
2. Can get it in several colors
Bolt was slightly too long for chamber.
Okay this bolt has one tiny flaw, it is just a hair too long, which means the balls do not always want to fall right in, especially with big paint. To abreviate it, if you are not using a halo or other force fed loader you will chop.
But don't get turned away yet, this can easily be fixed.
This I fixed by sanding off about 1/16"-1/8" of of the end of the bolt. I just simply used a good fine grit sand paper.
Other than that, it is super light, unbeleabably smooth, and gives a good tight fit.
Very nice bolt.
Don't let this little flaw scare you away, this bolt is light fast, tight fitting and is by far the best I have put in a pulse,
If you don't mind doing an easy modification, (and I mean easy), than pick this one up,
Oh and it's cheaper than other bolts out there, but is made with much better materials.
Buy with confidence.
gold to black fade paintjob
freak barrel system
32 degrees dropforward
ND blade trigger
ND flathead BP
self lubing, no o-rings, reduces kick, highers fps
material gets scratched easily
this is a very great product, it has no o-rings so you only have to lube it once in a blue moon, unless you chop paint. its a little bit of a pain putting it in because it doesnt come out the back. but that is also a very big strength. unlike the big aluminum bolt in the back it doesnt bang up your mask when you are trying to play tight in a bunker. also the stock bolt tears up the inside of the body of your impy.
why give it anything but a ten? the stock one tears up your gun but it dont just fix that it does more for your gun. i reccomend this as the first upgrade you should get for your new impulse.
10 out of 10
Last edited on Wednesday, December 31st, 2003 at 8:30 pm PST
This is a great improvement over the stock bolt. Delrin is the top material for bolts, so slick, so smooth. I would suggest this is you find it cheap or something like that, but for about the same price you can get a better bolt out of the ND delrin. It will bring down you moving weight quite drastically.
Good, but ND undercut them on it. Voodoo just doesn't have ND magic, sorry SP ND builds better Impulse parts than you :)
shocktech impulse bolt, equalizer, stock bolt and undertow
Ratpulse, vision, Adrenaline triggerframe, VFF, custom adrenaline thunder freak set, GP valve w/ lpr set-up (run through the asa), evil valve, 5" equalizer bolt, hsw derlin bolt pin, nd silk shot ram+ND mid wieght hammer, rat halo low rise, 68/4.5k maxflo tank, and the most important part, the chrome on/off button. also 12v revi and halo b
This is a very, very good impulse bolt. The main strenght of this bolt is that it is derlin. if you buy an impulse this should be the first upgrade you should buy. it makes the marker infinitely better. with this bolt you can turn down your gun's dwell and/or increase the pressure. with this bolt your gun can work much more smoothly and since its it derlin you dont have to worry about covering it in dow33 which is a pain. the bolt is amost exactly the same as a stock aluminum bolt except it is derlin and the back of it is flush with the end of the gun. for some reason this bolt is much more consistant than a stock bolt too. if you want to get the best out of your new voodoo bolt and impulse, i suggest getting a rathole ss hammer and a new designz ti pull pin. the reason i give this an 8 is because they could have opened up the holes in the front of the bolt a little more and have an angle in the inlet hole to the valve.
Just as a note: you should not be using any type of lube on this bolt. DOW 33 ACTUALLY SLOWS THE BOLT DOWN.
this is a very good impulse bolt but it is definitely not the best. the undertow bolt is a little better (unless you have a freak, then it is a much, much better) and an equalizer is even better than that. it is all personal preferance. peace out...
8 out of 10
Last edited on Saturday, November 15th, 2003 at 1:36 pm PST
Well, this is a nice after market Impulse bolt to get and it came stock in my Nasty Impulse. It performs nicely and like most other bolts, it's easy to lube and clean, (I use Dow33 corning lube) although the lubing is not necesary. This is a consistent bolt and it doesn't ruin your inner body. It comes with a cool little SP logo in the back, but mine fell off with the previous owner, so I never got it.
Nice aftermarket bolt to get for your stock or high end Impulse. Good investment.
10 out of 10
Last edited on Tuesday, August 5th, 2003 at 3:48 am PST