Works with PMI Flush Cocking System
DOES NOT CHOP!
None at all
This thing will get you where you need to go. A definite must-have for anyone with a lower end Piranha marker like mine. It is really accurate. I hit a small tree 20-30 yards away with about 5 out of 6 shots. I have used this many many times and have NEVER CHOPPED A SINGLE BALL! If you don't have one then buy it.
edit: finally chopped one ball after over 4 years of continuous use. This was with warm dirty paint that had been sitting in a closet for 6 months.
This is a good affordable upgrade for any Piranha gun, or probably anything else it is compatible with.
10 out of 10
Last edited on Friday, August 26th, 2005 at 10:01 am PST
My Pirahna EXT Pro G3, Camoed out with custom side mounted scope, 12 volt Revolution hopper, Empire Twister 14" barrel, 20 oz Pure Energy Tank, 6+1 with remote, Jt Nvader goggles
flush cocking, lightweight.
chops a few balls
The bolt came dstock on my Pirahna EXT Pro G3, and out of the box it shot very well. As long as you oil and take care of the bolt, it will shoot very well for you. It does chop a few balls, however, I have had a few problems with it, but not very many, the only time that I have chopped paint is when I was using cheap paintballs, otherwise, it works wonders for a stock bolt.
Not bad for a stock bolt, PMI did a good job with this one.
I don't really like this bolt. I mean it's a good bolt but compared to a plastic one, it doesn't. It makes my gun much heavier, and it kicks more. But there is a trade off. The bolt is really accurate. I can hit pretty much anything.
Also, my gun doesn't cycle as fast, chops more and scratches my internals.
I'm glad I got this bolt for free. Because I wouldn't buy it.
PMI G2 BTLF
Java low pressure system
Smart Parts All American barrel
PMI Turbo valve
Mako Storm Trigger frame
Smart Parts 68ci nitro tank
PMI Deluxe Flush cocking system
Its more durible than most bolts, less chopping
Its Heavier than stock
When I have purchased the Deluxe cocking system, It came with the PMI red bolt. When I installed it, I knew at first it would slightly lower the rate of fire. But that is made up with its accuracy. My marker shoots farther and more accurate with the bolt. If you like one shot kills, then the PMI red bolt is something to look into!
Overall, I am happy with the Bolt. Though it lowers your rate of fire, it makes up with better accuracy and range
Stock PMI EForce EXT PRO 2k3
PMI Pure Energy steel 68 ci 3k tank
light, flush cocking, and high flow
I want a delrin bolt
This came stock on my EXT PRO 2k3. It's a light annodized aluminum bolt that works with Flush-cocking. It's very useful for low pressure operation if used with a good reg. Have not had any chopping problms. It's only weaknes is no delrin which would allow for smoothre easier operation.
If you want to go low pressure or would just like a nice light bolt, this is an excellent choice.
Piranha EXT Pro G3
Dye Stainless Steel 14" Barrel
9v Revolution Hopper
Anti-Siphoned 16 oz.
Much improvement over the blue bolt.
It's not Delrin.
Bolt pin needs to be hammered in.
Very good bolt. I got it from PMI after inquiring about my consistent chopping. When I recieved it, the bolt pin wouldn't go into the hole- PMI said to tap it in. I did, and now it comes in and out fine.
4 Months ago, fanning my trigger would result in a broken ball. The other day, out of 50 shots, it pinched one. i prefer this over a chopped ball any day. Very cool.
Great stock bolt. If you don't have one and experience chopping, call PMI and get one.
piranah ext 2k4 pro
16" linear barrel
9oz co2, or 3000psi hpa
Never chops paint.
A very good bolt, never chops paint, it also has a slip in it, so that wen u shoot the cocking pin doesnt kick out at u like in a r6, and it doesnt need much oiling, but i do it anyways, it also helps the speed of ur gun, not by much but enough.
Its a nice bolt, if u only use 1 gun, and are never gunna get rid of it, then buy this bolt.
9 out of 10
Last edited on Monday, January 14th, 2008 at 2:29 pm PST
Piranha E-Force GTI Blue
20oz co2 w/anti siphon and on/off valve
Ricochet Apache Smoke
Dye Boomstick 14"
Dye Barrel Sock Grey
None so far
A few months ago i purchased this bolt and tested it. Ever since i have had it, i haven' t chopped a single ball. No matter how fast you can shoot, it will never chop at all.If you are looking for a great bolt for a great price, this bolt is right for you.
Piranha EXT G3 Pro, Standard Hoppper, CO2, SP Teardrop Barrel, Boss Bolt
Loud, scratches gun, gets scratched easily, chops like hell, and metal
This bolt sucks. That pretty much said it all. I got it stock and it scratched up my gun when i first played with it. It also get scratched easily. Get a boss bolt as soon as you can, This makes your gun really loud also. THIS BOLT DOES EVERYTHING ITS NOT SUPPOSED TO. DONT GET IT.
This bolt sucks like i said. Dont ever get this bolt.
Pirahna GTI E-Force red/black fade
12 inch J J Performance ceramic barrel
Viewloader Revolution w/ X-board and Circle Hopper Cover
Pirahna Flush Cocking system w/ EVO Bolt
20oz CO2 Tank
2004 WGP Black Autococker Orracle
Kaner 2 piece barrel
Empire Reloader Sound Activated Loader System
Pure Energy HP 4500 Tank
Flush Cocking System!
Easier on Interior of gun
Does not chop balls
I bought this as an upgrade for my Pirahna GTI E-force and it has been great. First the system cocks flush so there is no need for a beaver tail! The bolt is accurate and doesn't chop balls I have had a lot of fun and successul shots with this gun. The accuracy is better and the overall feel is better I definitely think anyone without the flush cocking system should go get one right away for their pirahna...there are so many pros.... no tool needed to adjust velocity, flush cocking, bolt that comes on higher priced pirahna evo.....this is a great bolt.
Go and get this bolt as a part of the the whole flush cocking system it is hard to find but well worth it....this comes stock on the pirahna evo