Bushmaster 2000, Kapp micro-gauge, Vaporworks no-rise, function rail, 45/45 Hyperflow Centerflag tank
Refer to review
Refer to review
-took a while to ship
-somehow, the neck on my revvy kind of collapsed and broke in half when squeezing it on to my rise, so i have to use one of those metal rings to keep thw two halves together
-only comes in black and silver
-Dust looks really cool.
-Makes for a really tight profile.
-Assuming it fits any hopper b/c of O-rings, fits mine really nice
-keeps a great grip on hopper
Definitley get it if you want a tighter profile and especially if you play front. Also if u want a great fit on ure hopper, get it. This product is definitley "well-designed" and looks really sexy. Its worth the 27 dollars and i havent been getting hit in my hopper latley.
9 out of 10
Last edited on Friday, June 18th, 2004 at 9:46 pm PST
Inexpensive, sits hopper on the gun and it looks great
ah... may not match certain types of anno?
This is a great rise!
- Inexpensive. I got mine directly from Vaporworks for $20
- Looks SICK
- O-ring retention system so all hoppers fit nice and tight. From Halo to Revvie they're all gonna stay in there. The neck comes with spare o-rings just in case.
- Very low, sits the hopper literally on top of the gun. Awesome for halos.
- Good company backing the product.
- I'm not really sure... It only comes in black and silver I guess.
I absolutely love this rise. Sooooo much better than stock and there's basically nothing wrong with it. I don't usually do this, but since I can't find anything really wrong with it, I give the Vapor No-rise, a perfect score!
Green Gen. 5 B2K2
10 inch freak with green tip
68/45 Air America Raptor
R2K It looks fruity but i dont care
KAPP stubby cradle
It lets your hopper is down lower
I ordered my no rise about month ago and it took 3 weeks to get here(out of stock). When i got the black no rise it looked like someone had taken a wrench to try to tighten it because it was all scratched up. Ok, I can deal woth that, I'll just put a little touch up paint on it. When i put it on my gun it looked pretty good. I put my r2k it the no-rise(the r2k fit great in the stock rise) and about 1/6th of an inch was sticken out and my hopper wiggled like crazy. So I cut alittle of the bottom of my hopper. And it still woggles like crazy but you can hold the gun by the hopper and it wont come out. weird.
Get this is you have a halo. I dont know if the other hopper will wiggle but if you want a no-rise and you want it in less than month, not scratched, and you want you hopper to fit, then dont get a vapor no rise.
this is a nice addition to the bushy upgrades. There was no "no rise" prior to this one. However, there has been one new no rise out, almost right after this one was released. check out www.tantrumpaintball.com for info on the clamp no rise.
The rise uses o rings in the interior to hold your hopper on. Little tough to get it in there, but it STAYS in tehre once it gets in. Really nice for me, since my halo would rotate a bit on the stock rise. you can also take the orings out if you like.
only have 2 complaints. It only comes in black and silver, and it kidna looks funny. Its not ugly, but its not the coolest. It would prolly look a lot cooler on the new bushies, however.
damn nice product from vaporworks. these guys know what they are doing. Just too bad it took so long to get this out on the market.. If you are looking for a nice no rise, look into this one. its a nice buy for the money. Only down side is the cosmetics... taht and getting your stock feed tube off. it was a pain.
If you want your hopper to sit as low as possible on your Bushmaster or BKO, look no further. Goldie has done it again with the Vapor No-Rise. It literally puts the hopper directly on top of your gun (I can't get my pull-pin out without rotating the hopper!) While most advantageous for the HALO, it also works well with the EVlution 2. The No-Rise includes 2 o-rings to ensure a snug fit, and it fits the feed neck of my unsanded Egg2 tightly. It feels solid when screwed into the body of the gun, and although the finish is shiny, it still matches my 2k3 body fairly well. The milling is nice, not overdone.
You may need to buy or borrow a strap wrench to get your old feed neck off in order to put this on... but trust me, it'll be worth it. Now you can have the lowest profile possible without a Warp Feed.
Goldie hits another home-run. A well-designed product that does what it's supposed to do.