The first retail part from Shocktech to help the performance of the hottest gun on the tournament scene, the Shocktech Hammer Kit helps improve shot to shot consistency and decrease internal wear and tear. The hammer kit includes a Stainless Steel Hammer that is fitted with its own rear bumper. The bumper is made of a super durable Urethane to withstand the abuse that a gun that fires as fast as the Intimidator dishes out. The kit also supplies a new rear knob. The new rear knob houses an adjustable stop to set the hammer's blowback depth just enough to drop in another ball, eliminating needless travel by the hammer. The Intimidator Hammer Kit will be available in Black, Silver, Blue and Red.
Product Availability
The Shocktech Adjustable Hammer Kit is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
Places to Buy
No Stores
Sponsored Links
Write a review and share your thoughts with other paintballers.
Aim 21 Red to black body matte fade*
Eclipse ram with QEV's 68ci by 4500psi crossfire tank
shocktech bolt
Shocktech valve and hammer
Blue to Black Texas Storm
CIP bolt with the d-bolt mod
Shocktech hammer kit
FBM Wave trigger
Contract Killer Grips
Strengths:
Special bumper
Lower operating pressure
Less kick
Better efficiency
Weaknesses:
None
Maybe the price but it does come with a ram cap.
Review:
Noticed tighter grouping over the chrono +- 3 fps, also lower lpr pressure dropped it down to 70 psi without shoot down. There is a lot less kick with this ram then others, no kick at 16 bps. Comes with a nice ram cap - doesn't stick out really far like the CIP and evil. Comes with permanent loctite so you never have to adjust the ram again.
Conclusion:
Great - if you want to drop your lpr pressure and have less kick buy this ram.
Super easy to install and the bolt is well manufactured
Weaknesses:
The replacement/adjustable knob is poorly finished for the price
Review:
the price this is listed at should get you a product that has all components included completely finished to a good --> decent quality.
I don't believe by looking at the two components that this kit came with that there was the same consideration to finished goods quality on the knob that there was to the bolt.
Obviously with the bolt cycling at the rate it does if the finish was poor NO ONE would buy it so my belief is that ShockTech was really paying attention to that and they did do a GREAT job on the bolt. I do believe the conversation about the knob was something like this
... well lets just take a chunk of aluminum and cut it to fit in good enough ...
Conclusion:
Overall I'm happy that I purchased this kit, I just wish that the whole kit was TOP quality.
It does work well, not needing to worry about wearing out the bumper and replacing it a lot but I do feel strongly that the knob is the weak link in this otherwise great add-on for any Intimidator.
Their customer service is THE WORSTof all the companies I have dealt with ! I will never buy their product again ! If you were to give me there product I would throw it in the trash . I talked to Robin the VP of shock tech about the adjustable ramcap and the billing error. She wouldn't do any thing about the error and implied I was lying about the billing error .It took over 60 days to get the product . She was not friendly and never fixed the problem .They have lost a customer for life .If you wan't the best customer service for your timmy go to BLAST .They have the BEST customer service that goes beyond any were else.
lasoya intimidator, cp barrel, egg, 88/4500 crossfire, volumizer, torpedo reg, nwproducts drop, and a dragon timmy trigger gaurd.
Strengths:
Adjustable.
Weaknesses:
Didnt have a long enough adjustment range..
Review:
Um, i got this with my timmy and i dont really know if the bumper on it was the stock one, but it is falt.. not like the dome ones that i am buying now, but flat. i dont know why it was flat, it didnt really make any sence to me but what do i know,..
Conclusion:
Ok setup if you dont mind spending the few extra bucks on a new bumper..
timmy z, empire B loader, dye ultra lite, shocktech ram and cap, dye gauge, macroline, dropfoward dye, nitroduct 4500psi on a smart part 72 ci ,CCM no rise, CP bleeding ASA, high flow barbs, hybrid LPR, short CP in-line reg
Strengths:
More efficient
lighter
no bumper
Weaknesses:
Price is not to bad
Review:
Honestly I was tired of running around looking for a replacement bumpers at the last minute. (I never plan too far a head). Many stores around lower New York do not carry alot of timmy parts, so when I was over in Long Island playing at my winter field, I asked for an ajustable ram cap with a bumper. They took out this. I decided to give it a shot. I was not upset, at the crono never a variation of more than+/- 3 fps.
A little locktite (included) on the screw of the ram cap and set it and forget it, no more fidgeting with ram depth.
Conclusion:
If you are looking to and a some more consistency to you're marker its a good choice. No bumpers, less recoil, lighter, adjustable ram cap
To me no product is a perfect! I am a very tough judge of everything there are no tens!!!
this is a good product most would call it a 10 to me a 9
A year plus no problems yet. A good upgrade
Rating:
9 out of 10
Last edited on Monday, August 8th, 2005 at 9:47 am PST
green to black fade 2k2
14" dye ultralight
chrome CP roller trigger
shocktech drop and on/off
WAS 2.7
Halo b
shocktech hammer kit
Strengths:
Adjustable, no bumpers, ram cap is in different colors to fit gun
Weaknesses:
Needs lock tight on the adjustment screw to keep it from moving back
Review:
I got this as soon as i got my timmy. I have used a stock ram on a someone else's timmy and didn't really notice any difference in kick back or anything. I like the adjustablity but i didn't like having to put locktight on the screw. Not that i didn't mind it or anything, i just thought that you didn't have to put any in. A nice thing about the ram cap is that it can be found in different colors to match the anno on your gun.
Conclusion:
I was pretty satisfied with it. It did its job and the cap matches my gun pretty well.
Dragon Intimidator, superfly bolt, shocktech hammer kit, was switch, was board, carbon fiber techna trigger, shocktech drop forward, paintball pins custom trigger guard, Dye Throttle 71
Strengths:
it's good and it does reduce recoil and gives you better control
Weaknesses:
the replacement back shakes loose frequently i had it pop loose while playing one time.
Review:
It's a good upgrade but the fact that the back pops loose is severely annoying. Since it's been so frustrating i'm thinking about trying the evil punch kit. Still it does the job it was made to do when the back stays in place. Locktite might fix this problem be sure to use only a small amount it seal it up.
Conclusion:
It's not bad let me see if the evil punch kit is better and i'll get back to you
