Airgun Designs ULE Trigger Pull Kit Reviews

Sponsored Links    Discount Airgun Designs Buy Airgun Designs ULE Trigger Pull Kit Paintball Automag Triggers and Frames Paintball Hoppers Paintball Clothing

[ Add Your Photo ]

Number of Reviews: 14 Average Rating: 9.9 / 10 Manufacturer Website: Click here Suggested Retail Price: $47

Manufacturer Description Subscribe to Reviews on this Product - Edit this Product Listing This is the hot new mod from deep in the bowels of the AGD Tech Lab. Swap your old on/off assembly for this one and instantly take away 2 lbs from your trigger pull. The new pull is 15 oz. and is the lightest pull of any mechanical marker with this stroke distance. Best part is we measure this from the top trigger loop so the bottom is even lighter!! So what problems are there? A couple things to watch out for. This only works on valves with two orings down in the bottom of the on/off hole. This means Classics, Xvalves and newer RTpros. It should not be used in Emags or Xmags because it reduces the rate of fire (the lighter pull doesn't pull the solenoid out as fast). The reactivity has been turned down in this upgrade so it's harder to bounce but EASIER to short stroke. You need good finger control to get the most out of this upgrade. Product Availability   The Airgun Designs ULE Trigger Pull Kit is older, so while it may be available used and in a few cases new, it is not commonly available anymore. Places to Buy No Stores Sponsored Links

Write a review and share your thoughts with other paintballers.

Show: Most Helpful First Least Helpful First Longest First Shortest First Newest First Oldest First Highest Rating First Lowest Rating First

stonersr25 Saturday, January 29th, 2005 Period of Product Use: 3 months 5 of 5 people found this review helpful. Paintball Experience: More than 5 years Similar Products Used: I have never used anything similar to this product, about the closest thing to this is an E or X mag on hybrid. Which is the electronic mode of firing with the kickback of the RT valve. Marker Setup: Currently running a cuctom Emag with warp, Egg, Center Flag 68/3000, Pipe barrel and my own little tinkerings which I will not mention. Strengths: The amount of speed you can gain, very very fast. Weaknesses: Highly illegal if you set it up for top speed. Review: Ok, first off you can only use this upgrade on certain valves from AGD. The valve I used was a X-valve on my buddie's RT-Pro. When I first started working with his gun I pulled it apart and started from scratch, if you are not fairly familiar with AGD products and are not mechanicaly minded you might have some problems with this. Anyway, this upgrade can greatly increase your rate of fire, as long as it is used in conjunction with the Level X. All you have to do is add a shim until you get the trigger where you like it and it doesn't go into full auto. I like to tinker so I got my buddie's just to the point that you could walk this thing like a dog and not have it go full auto. Basically it came down to having an adjustable tank and having the time to work on it. Keep in mind that it does take some skill to get this trigger and gun to work together to their highest potential, but I will say that I liked it better than my Emag. If you want to use a RT mag in a tourney I would advise this, but you may want to find out if the refs are going to be checking for bounce. Most refs overlook Mags, but if they check your gun these do have a lot of bounce. That may have been just this gun though because other people I have tal;ked with didn't experience this. Conclusion: This is an awesome product with great potential for mech guns. It brings RT mags back into the tournament seen with a vengence. If you can work on mags by yourself and you want to play tourneys with them then get this product. Rating: 10 out of 10 I found this review   0 Comments - Add Comment

Danman69 Saturday, October 30th, 2004 Period of Product Use: 6 months 3 of 3 people found this review helpful. Paintball Experience: 2 years Similar Products Used: Classic On/Off Assembly RT On/Off assembly Marker Setup: An Insane RT ULE Strengths: Light Pull Makes the Trigger Walkable Cheap for what you get Weaknesses: Somewhat Hard to tune Not Reccomended for Classic Valves Review: The ULT is an amazing upgrade for your mag if you have an x valve. I reccomend this to anyone who is looking for more speed out of their automag, because the ULT is the answer. It drops the wiehgt of the pull to 15 ounces, making it walkable if you practice enough. It allows you to increase your ROF about 1-3 bps over the stock assembly. It can be somewhat hard to tune if you are new to mags. All you have to do is adjust the amount of shims from 0-6. Most likely if you are running a Preset HP tank 4-6 is the best option. Don't be afraid to mess around with the amount of shims. Conclusion: One of the best upgrades to the mag yet! It offers the lightest mech pull on the market right now. Rating: 10 out of 10 I found this review   0 Comments - Add Comment

decimator4 Thursday, December 25th, 2003 Period of Product Use: Only tested 3 of 3 people found this review helpful. Paintball Experience: More than 5 years Similar Products Used: Classic Valve- Much heavier trigger pull Xvalve w/o ULT- Reactive trigger pull that is heavy Marker Setup: RT Pro: Nickel ULE, Nickel Y grip, Nickel CP micro drop, Nickel CP Mini Gasthru, ULE Trigger, Xvalve Minimag: Hopper Left, 14" Dye Boomstick, AGD Bike grip, Lvl 10 Strengths: Very light trigger pull Weaknesses: none so far Review: I have only tested this product with about 100 shots without paint. I got it for christmas and when I gassed it up and fired it I was shocked. The trigger pull was so light I thought sumthing was wrong with it. It felt to me like it might be too light, and go full auto, so I took out a shim from it. When I did, I could tell that it was adjusted fine before. I added the shim back into it, and I was still amazed at the light trigger. The only weakness might be adjusting, but mine came adjusted fine. Conclusion: This is a great product, and lightens the trigger pull significantly. I can tell it might take a little getting used to, but it is an excellent product. Rating: 10 out of 10 I found this review   0 Comments - Add Comment

tron1001 Friday, September 19th, 2003 Period of Product Use: 3 months 3 of 3 people found this review helpful. Paintball Experience: More than 5 years Similar Products Used: nothing - maybe electros (angels, timmys, etc) which compare to this trigger pull. Marker Setup: 68 classic, lvl 10, ule trigger (with 5 shims installed), intelliframe, 88/45k, etc etc Strengths: extremely short trigger pull Weaknesses: short stroking Review: I am somewhat of a purist and have always stuck by automags (dont like electros...)- so I might be a bit biased towards their products, HOWEVER please allow me to state that even though I am using a CLASSIC 68 air valve (not rt or x valve) this mod has DRAMATICALLY reduced the trigger pull on my marker. however - the bottom side is that the short stroking has increased has well......takes getting used to........... Conclusion: get it if you can live with a very hair trigger- has somewhat of a learning curve to get used to....but fun. works great in conjunction with lvl 10 and intelliframe.....not an essential upgrade (unlike lvl 10) - nice tool to fine-tune your mag, however. ill rate it a 10 - just cause it offers an amazing trigger pull for a mechanical marker......with the advent of electros, this is really a rarity. its a 10 for agd devotees. Rating: 10 out of 10 Last edited on Monday, September 22nd, 2003 at 7:56 pm PST I found this review   6 Comments - Add Comment

paint magnet Monday, December 1st, 2003 Period of Product Use: Only tested 2 of 3 people found this review helpful. Paintball Experience: 3 years Similar Products Used: Other products that lightened the trigger pull- Benchmark frames Marker Setup: ULE bodied, Xvalved (& LX of course), Intelliframed RTPro w/ 12" Boomstick , DataPimp drop and Mac Dev 68/45 Max Attack, HALO B .68 Automag, lvl 7 Benchmark 2x frame PMI 68/3k steel Crown Point barrel Strengths: lighter trigger pull (of course), which might also increase your ROF Weaknesses: easier to short stroke not recommended for classic or old RT valves Review: I've only test fired mags with this upgrade so I can't comment on installation It definately does what it claims to, as with all AGD products. The trigger pull is increadibly light, the only thing that I've found that comes close is adding a Benchmark frame (but they have a horribly sloppy trigger pull). You'll have to get used to it or you will shortstroke the crap out of your mag. Although you can get this for a lvl 7 mag I don't recommend it at all, because when you shortstroke, you chop. Conclusion: Go for it if you want a short and light trigger pull (and have level 10) If you want a trigger pull that's almost as light and don't mind the sloppiness, get a Benchmark frame. Rating: 9 out of 10 I found this review   0 Comments - Add Comment

Where'sMeShoota Monday, March 24th, 2008 Period of Product Use: 3 months Paintball Experience: More than 5 years Similar Products Used: Classic Automag Trigger RT Trigger Marker Setup: MiniMag X-Valve Air America Armageddon Strengths: Light Trigger Pull Retrofit drop-in Helps with accuracy Weaknesses: Will not rapid fire Review: This is a great mag upgrade. The lighter trigger pull allows for a considerably higher semi-automatic rate of fire than the RT trigger. But something that goes largely unnoticed is the increase in accuracy that comes with a lighter trigger pull. Your trigger finger natually tends to push the gun slightly to the side in the effort to apply enough force to pull the trigger, altering the direction of fire. Lessening the force required to pull said trigger will reduce this effect. However, with this upgrade, you lose a fun feature that only an RT trigger has the potential to provide. When running off of very high tank pressure (1000+ psi), the RT has the ability to fire fully automatic (well over 20 bps ...without batteries) when the trigger is pulled and held about halfway (not tournement legal, anyway). The ULT will not do this because it has no bounce whatsoever. So when you do upgrade to the ULT, keep your RT on/off assembly handy in the rare case that you should decide to unload a box of paint in a matter of minutes. Conclusion: I held off from buying it for a while, but when I did get it I wasn't disappointed. Rating: 10 out of 10 Last edited on Thursday, May 15th, 2008 at 5:20 am PST I found this review   0 Comments - Add Comment

shotbirdsfallin Saturday, January 6th, 2007 Period of Product Use: Less than a month Paintball Experience: 6 months Similar Products Used: none Marker Setup: Mag: -Xvalve w/ lvl 10 + ULT -ULE body -Proto 1 piece 12" -Intelliframe w/ blade -Gas thru foregrip -12v Revvy -47/3000 psi -NDZ On/Off ASA Strengths: -easy install -Cheap -Speed Weaknesses: -None so far Review: First used it today. I put 5 shims in but was too many(it seems). 4 works great. Trigger is very light and can easily out shoot my revvy, I even accidently shot and all this with a mech trigger. It is walkable, not that easy but I havent been trying. Conclusion: Definately worth the buy...got mine $35 used. and best of all NO BATTERIES! Rating: 10 out of 10 I found this review   2 Comments - Add Comment

nathanjones008 Tuesday, November 28th, 2006 Period of Product Use: Less than a month Paintball Experience: More than 5 years Similar Products Used: none Marker Setup: 68 mag(powerfeed)/ jj cermanic barrel/Airgun design triigger pull kit/ xvalve/ intelliframe blade style/empire 2 reloader/extreme ragedrop forward/pure energy 68/4500 fiber wrapped tank Strengths: This products makes your mag a monster. Weaknesses: Takes time to install/can short stoke if not careful. Review: This product came in the mail yesterday! I was so excited i wanted to max out my xvalve so bad/ get full potential. when i first screwed in my tank it made a poping sound. it seemd as if it automaticly cocked. then when i was shooting it was going fully auto and thier was shoot down. to make a long story short i took out two shims and it works perfectly now. i was shooting so fast! my friends were stunned on how fast a old school mag shoots. i think with no problem it can keep up with electros. Conclusion: If you are looking for a great upgrade for a mag w/ a xvalve and you want full potential with your gun get this upgrade. another great product from agd. Rating: 10 out of 10 Last edited on Wednesday, November 29th, 2006 at 6:33 am PST I found this review   0 Comments - Add Comment

AGDRetro Monday, August 28th, 2006 Period of Product Use: 6 months Paintball Experience: More than 5 years Similar Products Used: Tested the DeadlyWind hAir trigger, but even that is VERY different! Marker Setup: AGD Automag RT Pro Deadlywind Karta ULE body kit X-Valve w/ Level 10 Superbolt & AGD ULT kit AGD Intelliframe w/ RPG Viperblade trigger Deadlywind Carbon Fiber fore-grip DYE Ultralite barrel kit NDZ On/Off Crossfire 68/4500 HP tank @ 800 psi Strengths: Drop-in mod Easy to tune Lightens trigger pull Increases ROF Weaknesses: Designed solely for use in X-Valve Review: AGD is just one of those rare companies that makes something that makes a difference in performance, and the ULT kit most definately is one of their best innovations! It takes the standard RT trigger and reduces it's pull weight by nearly 2/3, giving it as close a feel as you can get to electronic and still never have to change a battery! When paired with a nice adjustable trigger (like RPG's Viperblade) it becomes the ultimate mechanical paintball marker, capable of holding strings of 13-14 bps with relative ease! $47 for an upgrade that does something! Conclusion: If you want to stay mechanical but remain competitve, an Automag with the ULT kit is the only way to go! Rating: 10 out of 10 I found this review   0 Comments - Add Comment

cort422001 Sunday, July 30th, 2006 Period of Product Use: Less than a month Paintball Experience: More than 5 years Similar Products Used: -Original trigger assembly -E2 autococker frame Marker Setup: Autococker with E1(Zero-B), Freak, Halo-B, Eclipse Internals, Orange bolt, CCM feed neck, gen-x, palmers LPR, Psyco-Balistics Bullet Drop, 68/4500 tank Strengths: -Drastically reduces weight of trigger pull Weaknesses: -Takes some tuning -May need extra shims Review: this trigger kit really will make your mag compete with electros on any field, if set up properly. The six shims it comes with were not nearly enough for me, I had to use some of the extras out of my level 10 kit, I have 11 on it right now, so automag could stand to include more shims it the package. Other than that, great upgrade! Conclusion: If you have the x-valve get this! its only 50 bucks and well worth it. If you dont like to tune your gun installation could be a little tricky. Rating: 10 out of 10 I found this review   0 Comments - Add Comment

Write a review and share your thoughts with other paintballers.

Show: Most Helpful First Least Helpful First Longest First Shortest First Newest First Oldest First Highest Rating First Lowest Rating First

Places to Buy No Stores Sponsored Links