evil lpr set up, adrenalin lpr combo (basically the same)
ratpulse vision, sp ti bolt pin+voodoo bolt, aka sidewinder, mini max-flo w/ lpr set up by adrenalin, twister feed tube, 10" freak kit, nd silk shot ram/mid-wieght hammer/ram housing, fangz ball dentz, smart grips, preditory frame w/ blade, maxflo 68ci-4.5k
best impulse lpr set up
this is with out a doubt the best lpr kit for any impulse. the reg is very good and has a fast recharge and since it come with a big valve cap it can handle low pressures if you wish (even though that isn't the best set up). it is also made to be used with a stock valve. you cannot use an evil valve on this lpr. the only other valves you can use are the r.i.p. valve from ND or the planet eclipse valve. i would recomend gettin the r.i.p. valve, but if you don't it will work amazingly too. this is a must for any impulse. when i get my ratpulse it had a vff on it. after about 8 cases of paint i thought i should get an lpr and got this one (i have another impulse i have my evil lpr set up on). this lpr rid my impulse of the kick i was used to and i got about 400 more balls per fill because my valve pressure was 200-220psi. my bolt pressure is now about 70psi.
an lpr is a must for any impulse owner, forget a tapeworm or vff, just save your money and get an lpr (this one). it will improve just about every aspect of your marker! this is without a doubt the best lpr set up for an impulse!!
Nasty Impulse 3.5
extreme rage low rise adjustable feed neck
Dye sticky 3's
NDZ Pro EQ Derlin Bolt
NDZ RIP valve
NDZ Hammer Housing Assembly HE
Phyco Ballistics drop foward
68 ci 4500 PSI Cross Fire tank
Tippmann 98 custom
rocket cock II
Rear velocity adjuster
14' and 16' AA barrel
32* flame drop foward
egg II hopper
Lowers pressure some, but not much
I just got this LPR and i thought it was gonna be top of the line. i go out the the field the first day with my new LPR, air it up and pop. my LPR hose blew out. No big, i went into the store and the lady gave me a new hose, i cut it to the right length and install it. easy. then i go out on the field for my first game. i took only 150 shots and i lost about 1500 PSI on my tank. i figured there must be a leak somewhere. so i turned off the air, disassembled the LPR lubed everything and put lock tight where ever i thought there might be a leak. i go out again and the same thing happens only this time i was getting horrible FSDO. like if i didnt shoot for like 3 seconds id get fsdo so bad the ball wouldnt even come out of my barrel. also my paintballs werent even goin 50 feet. and yes i had the LPR set. I had no idea why it wasnt working so i asked some of the refs at the local field and they had no idea what was wrong, one of the refs even said that the same thing happened to him and that smart parts LPR's suck. I tried turning the end cap but nothing at all happened. there was no different from when the end cap was all the was screwed in and all the way screwed out. I decided to take the LPR off and put the front cap back on. the gun worked fine for the rest of the day. Later i took the LPR to all the different stores in my area and none of them knew what was wrong. They told me i would be better off just getting a new LPR. Not even the smart parts tech knew what was wrong. Im gettin a NDZ LPR and hopefully that will be better than the Smart parts max flo LPR.
I am giving this product a 3 for its looks, becuase it does look nice, and it did decrease my operating pressure a tad. Please dont flame me for this review. everythign in it is true and maybe i just got a defective LPR. If anyone knows how i can fix my LPR please tell me because i would liek to give this product a higher rating.
FSDO Cured, Air Efficiency increased drastically. Tech assist over phone and email from manufacturer outstanding.
Contains worm installation instructions only. ALOT of trial and error.
After installing a slik shot, ND Brass hammer, Delrin Valve, and equalizer bolt I still had First Shot Drop Off, and my air efficiency was still lacking. After installing the Max-Flo LPR I NEVER experienced FSDO again, and I gained about 400 more balls per fill on a 68/3000. The tech support was outstanding. I was using a Genisis board and having all kinds of problems getting the LPR/Dwell fine tuned. The Manufacture helped me solve the problem even though the after market board was not thiers.
Oh by the way, this was installed on a Pre-release Imp.
I highly recommend this product to any player out there with efficiency or FSDO problems. The manufacture has the best tech support.
Blue SP Vision Impulse
Blue/Black Max-Flo Regulator(Not vertical reg)
Blue Clamping no-rise Feedneck
SP Magnetic Blade Trigger
12" Blue SP Progressive
Black HALO B
Pure Energy 68/4500 N2 Tank
Black/Grey Empire Bottle Glove
SP Tank On/Off Valve.
Shots per tank, cool-looking, and other stuff.
It's a great product. It looks different than the Smart Parts website shows. It looks a whole lot cooler on a gun. It has good efficiency, flow, and shots per tank. I'm not too sure on the price, but i think a new one was about $100, but they stopped selling them. It's been discontinued just like the Impulse has. They're a little hard to get, but not if you know where to look. It works well with the Vision.
Get it. You won't regret it at all. You'll probably have to get a pre-owned one, because i don't think they sell them anymore. I got lucky when i got mine.
Empire Reloader B
Smart Parts IOn
THe Max Flo Air System is an overall terrific product. Since I first started using it, it has done wonders for me. My guns consistency is 10 times better. It also lowers the pressure so you don't use as much nitrogen. This is definetley the best on the market. Anybody who is looking for a nice regulator better look at this one.
When i got this product it did not work. I e-mailed smart parts, didnt respond. Called them later and they told me to try a couple of things to fix the problem. Didnt work so i called them again, and they said they could do nothing about it, and the only way to fix the problem was to buy a new (75-90) dollar LPR. They would not send me a new LPR for free! So i fixed the problem easy by going out to my local shop and buying a Tapeworm....easy problem fixed by 20 dollars....So just go out and get a Tapeworm
Dont buy, Doesnt work, Horrible cutomer service, Cheaper imporivses...
Nasty Vision Impulse
Smart parts LPR
Full Freak Kit
15 degree ASA
New Designz Equalizer bolt
New Designz Ball detents
New Designz Flame Eye cover
Dye Sticky 3
Check-it Low Rise Clamping feed neck
Better air efficiency
Smaller than others
Pricey, but almost all LPR's are
When i first got it and put it on i was surprised how small it was compared to ANS and Ndz LPr's that i have seen which is a plus. Its a nice looking LPr and comes in a few colors. The performance is really good, I noticed the air efficiency increase,and i lower my pressure which reduced in less kick :). THe consistency of the LPR is pretty good, i was shooting -/+4 over the chrono which is ok, could be better tho, but there could be a break in period *shrugs shoulders*
If you are looking for an LPR, and don't mind giving smart parts more money that they don't deserve, than this is the LPR to get. :P