pbReview.com / Check It Products Sure Fit Feed Neck / Check It Products Sure Fit Feed Neck / Check It Products Sure Fit Feed Neck / Check It Products Sure Fit Feed Neck / Check It Products Sure Fit Feed Neck
This is a brand new "sure fit" feed neck for angels specifically answering all the problems of having to shave down the feed necks of loaders and keeps loaders in very tight, is also specifically colored for WDP guns I.E. Dust blue, polished blue, polished silver, Dust silver etc. . It allows plenty of room for clearance to open the breech also.
The Check It Products Sure Fit Feed Neck is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
Black dust Angel Speed, black matte(dust) CIP neckfeed, A4 bolt, CP rail and on/off, New designz volumizer, 14" dye ultralite, Evolution II w/y board
Keeps hopper from moving around, keeps a relatively low profile, matches my marker wonderfully.
A little pricey, but everything in this sport is pricey.
It was difficult to get my stock feedneck off. I had to use a wrench to get the old feed neck off. Make sure you use some loctite on it when u put the new one on so u don't strip the threading when moving around.
I personally love CIP neck feeds. Grip neck feeds is the only way to go.
10 out of 10
Last edited on Thursday, July 15th, 2004 at 6:26 pm PST
Dark Angel IR3 Mem6 CopsII, Check-it low rise clamp feed, crossfire 68/45 red reg, check it unimount , CP 3-piece barrel kit
Keeps your loader down tight, matches the anno almost perfect.
None, maybe a little pricey ?
Wow I used the stock neck with gated feed for about hmmm.... 2days until my feed neck got overnighted, this thing is such a dream for halo and eggII owners, I refused to sand down my 100 dollar hopper setup (evoII + Z-Board) cause thats retarded. So I checked this thing out and it looked great, only takes 10-15 minutes to install I would suggest buying a strap wrench !
Fits any feed neck. Low rise, making you a smaller target. Easy install.
Will not work well with gravity feed hoppers like revvy's, ricochets, reloaders, etc.
Really a great little upgrade for any gun. It lowers your profile and totally eliminates sanding your feed neck. It'll even fit halos with no sanding. (and if you've ever used a halo, you know how thick their feed necks are)
Don't use this with gravity feed hoppers like revvy's, ricochets, and similar hoppers, or you'll have a paint blender.
Great product, worth the money if you need a shorter gun and are using an egg2 or halo.
This is ok horrible for halo owners very hard to get on....otherwise its great works like dream after u get it on. to take off the stock feed neck get a rubberband and vice. put the rubberband around the feedneck and grab the rubberbad with the grips and twist
This product is ok... i wouldn't recomend to halo owners