pbReview.com / Check It Products Matrix Sure Fit Feed Neck - No Rise / Check It Products Matrix Sure Fit Feed Neck - No Rise / Check It Products Matrix Sure Fit Feed Neck - No Rise / Check It Products Matrix Sure Fit Feed Neck - No Rise / Check It Products Matrix Sure Fit Feed Neck - No Rise
Check It Products Matrix Sure Fit Feed Neck - No Rise Reviews
You've spent $1000 on your marker, $250 on your air system and $130 on your loader and you're using duct tape? Shaving and sanding are tasks of the past with this feed neck. Don't skimp on the necessities and secure your loader to your marker the right way. Why cost your team the game when your loader falls off when you can be sure?
Make sure that loader fits and it fits tight. Will fit VL Revolution, VL Evolution, VL Evolution 2, all Ricochets, and even the Halo B Loaders without shaving the loader neck or extra work. No more loose loaders moving around with this part.
The Check It Products Matrix Sure Fit Feed Neck - No Rise is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
dye matrix, halo b, sure fit no rise, evolve grip, evolve bolt, aka stuff
ease of fit and strong clamping ring, great color selection
this is a must have for a matrix owner. the stock feed neck wasn't able to hold my halo b b/c i had to shave my halo before to fit my autococker feedneck. that's why i had to get this sure fit no rise.
it actually makes a lot of sense to get a clamping feedneck anyway. how many videos have you seen where players would run and dive and off goes their hopper? well, i've done it several times before. it ruins your game b/c you waste a lot of time getting your hopper back on and the paint is most likely broken or ejecting out of your force-feed halo b.
getting this mod allows you to make sure the halo is on tite. it will fit halos without any need to shave. the clamping is strong and secure. i've cranked it down several turns and i still haven't had any problems yet.
very good upgrade to get. this allows you to use any hopper system out there b/c essentially, the size of the clamping can change to your specific hopper.
very strong and durable.
dye DM3 with tadao 5.0, C4 backplug, kapp bio sleeve, modded bolt stop, cp reg, scm3
Holds TIGHT. looks bad@$$
what is there to say about it. It holds REALLY tight, uses allen keys to tighten. I have had mine for a while and wouldnt buy another. this feed neck is simply the best one out there. If you dont already have this, you better go get one to hold that heavy halo b.
Red Toxic Trix
14" black freak w/ SS back .691 insert
Black Check It no-rise feedneck
Evolve bolt kit
Black Cp inline reg
Black PBC LPR
Black Empire Rail
Black 32 deg. ON/OFF
Black evo2 with Zboard
There are none are you kidding!
Although my stuff is brand new and only tested stuff a couple times, and havnt had anything to really test it against. I have found this feedneck to be great, it came on my gun but im still glad it did. Its kinda annoying having to use a allen wrench bc everyone wanted to dry fire my trix, so i had to keep going back to my gear bag and getting allen wrench to loosen it tilt upside down to take my hopper off and not dump paint all over, then when finished having to repeat process then tighten hopper back down. But other than wanting everyone to test such a sweet gun with such a sweet feedneck its awesome.
Don't think i could go on without this feedneck it works perfect, has no flaws whatsoever unless u have ppl who want to constantly test out your sweet marker.
Go out and buy it now! No matter what hopper u have it will fit, it looks hella nice. Great quality, didnt find any flaws on it not even the annoeing on it. This product is just the shiznat, so go and buy it. Its a must for any Trix Owner. With my egg its a low profile i didnt know if it was gonna fit bc the neck on the hopper is cut in half to eliminate height, and it fit perfect and never moved side to side, because this feedneck offers such a tight grip.
BUY IT! BUY IT! BUY IT! Perfect 10 WAY TO GO CHECK IT!
Various high and low rises, clamping/twist lock rises
1) Cobalt Dye LCD: Reloader B, Check it no rise, Evolve bolt, Freak barrel, Sidewinder inline, Mini-trinity LPR, 68/4500 Max flow
2) Black to Red NYX Matrix: Red Reloader B, Image / Evolve bolt, PBC LPR, Sidewinder Inline, CP Roller Trigger, CP Snatch, 04 Max Flow 72/4500
3) Graphite Angel 4 Fly: Stock, same tank as above
Height and locking mechanism
Uses an allen wrench (not a weakness in my estimation)
Rises are not exactly rocket science. Give me something that keeps my hopper low, and doesn't let it go flying off on a hard dive/slide. That's what this product does, pure and simple. If you're someone who likes to take your hopper on and off for whatever reason, don't buy this product. However, if you want to put your hopper on and play all day without it moving, then this is for you.
Low price + low profile + no loader movement = 10
I HIGHLY recommend this!
Gen-E Matrix, Freak Barrel, New designs Breech with Impy Detents Check it Low rise, tentacle Trigger and Tadao 4.0.
Hell lot shorter than stock rise plus no more sanding and taping. Clamping
uh... whats so weak about a feed neck
Well i got my matrix and i was using a ricochet for a while. Then i switched to a Halo. ANd personally i'm very lazy. Very Lazy. So i didn't want to sand my new halo so i just went out to my localPro shop and got a Check it low rise.
I'm very happy. I love the thing plus its a hell lot shorter.
Its holds the Loader due to its clamping feature so no more sanding and no more taping.!