RIVAL Body Screw-in vertical feed > Complexed 3-d milling > Made from solid billet body for strength
The Front Plate & pneumatics Adjustable CENTERLINE REGULATOR > Which takes the place of the bolt plate > ADJUSTABLE 3-WAY > Revolutionary Light weight FRONT PLATE that takes place of the front block
Short Rebuild able ram
RIVAL Bolt Made of light weight black delrin which allows for the lowest pressure possible
RIVAL 1-PIECE adjustable Swing Frame > Completely adjustable trigger > Trigger has a patent pending roller trigger action. > Frame designed to conform to your palm.
RIVAL Stage 2 regulator 2 Piece Body > Adjustable psi from 0-500 > Totally rebuild able
Bottom line Braided hose kit > BLUNT mini slide mount
HYBRID GRIND screw in line
LIFETIME WARRANTY ON COMPLETE PARTS OF THE MARKER USED BY THE ORIGINAL OWNER BASED ON LEAKS AND PERFORMANCE.
SERVICED BY HIGHLY TRAINED STAFF AT HYBRID TECHNOLOGIES.
The Hybrid Technologies Rival Numatic Marker is older, so while it may be available used and in a few cases new, it is not commonly available anymore.
hybrid rival numatics, pretty much stock, just Shizzle panels.
A new DF and barrel in the near future. All I can think of
quiet, consistent, accurate... and that's stock.
Drop forward doesn't drop forward, just goes down about an inch.
This is a great gun if you are buying your first cocker... and this is also a great gun if you're not buying your first cocker. So overall this is a great gun. If all else fails you have that lifetime warranty to back up on so there really is no losing and you cannot find a better gun for the price, another perk it's tournament ready right outta the box.
and a wide variety of customized cockers
What can i say, I'm a whore when it comes to cock.......ers.
-Hybrid Trigger Frame
-Hybrid Delrin Bolt
-Hybrid Stage 2 R-Drive Reg
-Hybrid Front Plate and pneus
-Shocktech Clamping Feedneck
-Shocktech Stage3 drop
-Shocktech On/off valve
-Shocktech Phat hammer
-Shocktech Rat Valve 3:16 (wasn't able to atttach because the WGP valve tool is small)
-48/3000 HPA tank
Fast Hopper (12vt Revvy is fine)
Nitro Tank (obviously)
Eblade or Race Frame or E2
New Bolt (shocktech supafly or slik III)
New Valves (but make sure your tool will be able to attach them)
Alright, when this first arrived, the first thing i did, naturally, was take it for a test drive, i took Plenty of Dry Fire shots and Took it out to shoot paint. When i took my first shot with paint, the first thing i noticed was that it was so QUIET and some of my opponents might not be able to know if i'm even shooting. Well then i did the accuracy test. I set my Target at about 60 Feet and shot at a velocity of 280fps. The first shot was my target, and trying to not shake my hands tried to shoot exactly at that position again, and it was a success, then i tried shot to shot consistency, and all the shots stayed fairly close to my first shot. Now thats basically Ball on Ball. I moved it at 90 Feet and Still kept the same score of fairly close to Ball on Ball. Then 120 feet was next and I saw some changes on shot to shot consistency, it was normal seeing as it was a long range, so that doesn't take off much from my score.
Alright after i was done testing accuracy i moved on to see how fast i could shoot. Mech Cockers are known to be slow and the highest i've ever seen anyone go on a mech is prolly 10-12 BPS and with this cocker i was able to achieve jsut that. WIth lots of practice i could easily hit it with no problem. But if you get something like an Eblade then you can really start blowing people away.
Well cockers are known to be small so its a given that this is going to be small, but when i first picked it up i was amazed at how light it was given that this is a cocker. If i wasn't looking at it i wouldn't have known if this was a cocker, it was lighter than my brothers spyder and also lighter than my friends piranha.
Alright well Every sexy gun has their off points and this gun is no exception. One problem i had within the first month i had this was the cupseal would always come lose and air would just spew out of the barrel. But working with cockers alot this wasn't that big of a deal. But what pissed me off was that I couldn't add my Rat Valve 3:16 in it. But it's probably because of my Valve Tool. The WGP valve tool has a very small diameter where the valve pin is supposed to fit. And with the rat valve having a pretty big diameter it wasn't able to fit.
Well I love this gun like no other. But the true choice is on your side. Do you think YOU will be happy with this cocker. With all the information given, would you consider buying it.
Hybrid gen 3 w / e-blade
riochet 2k hopper
This gun is defeinlty not a take out of box and go play. Although after some tinkering this marker definelty performs and makes it worth it. Not to mention the marker wieghs less then the paint and hopper. Also the gun is fairly pretty.
Some annoying problems out of the box
-bottomline pin is too long for most nitro/co2 tanks 1 out of my 5 worked.
-regulator leaked and needed to be rebuilt...
-feedneck was to small for my revvy or halo....
-Delrin bolt takes a beating when you try to remove it
While none of this problems are devasting they do take away from the fun of getting a new gun...
For the price I'd say the gun is well worth it. After dealing with the annoyances the gun will not let you down. At least none of the problems required a box and postage stamp:)
Also have a wgp autococker, the hybrid rival out performs the wgp by far. more accurate, consistent, faster, and weighs about half the amount of the wgp.
I am using the hybrid rival right now, the wgp has become my back up. The rival now has dye sticky grips, 9 piece phat barrel kit, and a dead on paintball on off drop forward. Also running a evo 2 hopper with 88c.i. air tank.
Not real big on the factory grips, need to change the drop forward as well, if you want your bottle tucked under.
Accuracy, very light, fast.
Factory grips are not the best. Drop forward needs to be changed.
Super light weight, thin, front block is about half the size of any other cocker. When people pick up my rival and see the dye grips, they think it is a dye ultralite due to it being so light weight. Feed neck is threaded, so you can remove it easily. Adjustable ball detent is very nice.
Very happy with this marker, would suggest it to everyone. cant wait for there race gun to hit the stores. Excellent marker rival, keep up the good work!
hybrid rival with a 45/4500 pure energy tank and a 12v revy
Comes with a barrel, bottem line, and is cheap
Not that accurate
Well i bought this gun because my friend bought a cocker and i wanted to have a cocker to so he would stop braging. I was so ecited to use it. The next week i went with the friend and shot it for the first time. When i shot it i was amazed of how innaccurate it was for a cocker i was expecting a lot more. But the next week it redemed itself in a tounament over at toumbstone. Are team was h2k and we were all pretty good being that it was the first tounament that we had ever been in. Well anyway the gun is pretty kool after i got used to it. It's very air friendly and loves kids. lol. This would bee a good gun as a backup gun.
All in all this gun was good for the mony but i would recomend to save up and buy an electro.
32 degrees 14 whisper barrel ricochet apache hopper nwpp 15 degree spyder block new designz high preformance valve crossfire 70ci 4500psi tank and dye sticky grips 3
psycho balistics drop forward with on/off
14 inch stiffi
sto ram with qevs(makes it alot faster)
Very good stock
Its quiet great for woodsball
You have to time it
Its a mech
Hard to find new
This was my first marker so wen i got i didnt know that i had to time it, use hpa so i ran raw co2 through it. It took alot of buse but stiil worked with out much trouble.now my cocker is better than ever. I just enjoy upgrading my marker and the autococker is the best for it
I definatly recomend this marker for any 1 with some time and money. Go out and look for yours today.
i have used bko's (prety good), almost every spider,and i've finished of a half full hopper on a angel speed (very very fast)
I have a 68/3000 crossfire tank on it, i have a delrin bolt, and i'm meaning to get an e blade on it.
Acuracy definetly, very light, balanced wheight with tank
Great gun, doesnt need lubing vary often, its acurate, good looking, very light (especialy with a fiber tank), dont get it if your new to paintball, oh and when i was sliding a screw came out of my 3 way so i wasnt to happy, when you chop a ball the acuracy gets all out of whack. A weakness is Speed (even tho it has a shoter triger pull than most wgps, doesnt mean its faster)
I say, dont get it if you dont have the money to get an eclipse frame sometime (not a worrblade) but other than that its a great gun!